横波速度各向异性初步探讨：—多波勘探资料的应用

在纵波、SH 型横波资料处理和解释过程中,我们发现四川 HBC 地区地下介质普遍存在方向各向异性。当横波通过方向各向异性介质时,分裂成两个波:一个波的偏振方向与裂缝平行,叫快横波;另一个波的偏振方向与裂缝走向垂直,叫慢横波。采用相应的观测和处理方法,便可获得快横波和慢横波剖面。根据同一界面的快、慢横波的旅行时可以求得各向异性系数。同样,还可以利用 SH 波与转换波的速度比求取各向异性系数。各向异性系数的大小,反映了裂缝的发育程度。如果野外作了 X、Y 分量观测,室内又作了坐标旋转处理,那么,就可以进一步确定裂缝带的方向。如果未作上述工作,也可以根据构造线走向,大致确定裂缝带的发育方向。     

Thermal decomposition and micropore formation in PEK,PEEK and PES

At strain rates greater than about 10 the deformation of polymers is an adiabatic process which can lead to the generation of very high localized temperatures. These may be well in excess of the temperatures required for thermal decomposition of the polymer to occur. It is speculated that gaseous products arising from such decomposition may act as the source of microcavities and craze initiators. Experiments are described in which the thermal decomposition reaction parameters of polyetherketone, polyetheretherketone, and polysulphone are measured using differential scanning calorimetry and thermogravimetric analysis, and the decomposition products analysed by mass spectrometry. The results indicate that the proposed mechanism could act as a source of micropores with total pore volumes amounting to several per cent of the material volume.     

中小企业创业资源的形成机制研究

创业资源是创业的基础,创业过程的规律性和市场配置资源的基础作用影响和决定中小企业创业资源的内在功能和形成方式。对中小企业资源的形成机制进行了分析探讨,并分析了它们之间的内在关系。     

规范经营管理提高经济效益

通过3个电站的调研，对作为小水电企业而言，只有切实加强工程建设管理，实行项目法人责任制，就能确保电站工程建设达到设计要求、工程质量优良；提高电站自动化运行水平，更能保证电能质量、电网运行安全稳定、降低发电成本；进一步规范电站管理，对人员实行“工效挂钩、绩效挂钩”，才能进一步提升市场竞争力、提高经济效益。     

Co-evolution as a computational and cognitive model of design

Co-evolutionary design has been developed as a computational model that assumes two parallel search spaces: the problem space and the solution space. The design process iteratively searches each space using the other space as the basis for a fitness function when evaluating the alternatives. Co-evolutionary design can also be developed as a cognitive model of design by characterizing the way in which designers iteratively search for a design solution, making revisions to the problem specification. This paper presents the computational model of co-evolutionary design and then describes a protocol study of human designers looking for evidence of co-evolution of problem specifications and design solutions. The study shows that co-evolutionary design is a good cognitive model of design and highlights the similarities and differences between the computational model and the cognitive model. The results show that the two kinds of co-evolutionary design complement each other, having strengths in different aspects of the design process. Electronic Publication     

Dielectric modeling of transmittance spectra of thin ZnO:Al films

A dielectric model comprising band gap transitions and free electron excitations (Drude model) is successfully applied to simulate transmittance spectra of ZnO films doped with 0.5%, 1% and 2% Al. The Drude formula contains a frequency-dependent damping term in order to get a good fit in the visible spectral region. Useful physical parameters obtained from the fit are electron density and mobility within the grains, film thickness, band gap and refractive index. The optically determined film thickness agrees with that obtained with the stylus method within 2%. The optically determined electronic parameters are compared with those obtained by electrical measurements. Contrary to thin In₂O₃:Sn films, the Drude mobility inside the grains is similar to the direct current Hall mobility indicating more perfect film growth without forming pronounced grain boundaries. Maximum value is 35 cm²/V s. The effective electron mass is estimated to be about 0.6 of the free electron mass. The refractive index at 550 nm decreases with increasing electron density.     

Effects of multiple weak interactions on the binding of phenolic compounds by polymeric adsorbents

To investigate the effects of multiple weak interactions on the binding of phenolic compounds by polymeric adsorbents, macroporous polystyrene (PS) resin and PS‐based adsorbents with different hydrogen‐bond acceptor atoms (PS CH₂( OCH₂CH₂)_n OCH₃, n = 0, 1, 2, and 3, denoted as PS‐EG₀, PS‐EG₁, PS‐EG₂, and PS‐EG₃) were prepared. The phenol adsorption strength order on these adsorbents was PS/PS‐EG₀ < PS‐EG₁ < PS‐EG₂ < PS‐EG₃, indicating that the adsorption on PS and PS‐EG₀ was driven by hydrophobic and π–π interactions, and the adsorption on PS‐EG₁, PS‐EG₂, and PS‐EG₃ was driven by a hydrogen bond in addition to hydrophobic and π–π interactions. PS‐EG₂ may adsorb a second phenol molecule on each binding site and PS‐EG₃ may adsorb second and third ones. The adsorption strength of resorcinol increased in the order of PS, PS‐EG₁, and PS‐EG₂, indicating that the adsorption was driven by 0, 1, and 2 hydrogen bonds in addition to hydrophobic and π–π interactions. Similarly, the adsorption of phloroglucinol on PS, PS‐EG₁, PS‐EG₂, and PS‐EG₃ was driven by 0, 1, 2, and 3 hydrogen bonds in addition to hydrophobic and π–π interactions because the adsorption strength increased in this order. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4652–4658, 2006     

A Shortcut Method for Estimating the HETP of Structured Packed Distillation Columns at Elevated Pressure

A shortcut model is developed for predicting the HETP of a structured packed distillation column operating at elevated pressure. The proposed model incorporates the geometrical parameters of the packing, physical properties of the vapor and liquid phases, and the hydrodynamics of the two‐phase flow. The proposed model is tested and validated by comparing the predicted results with the present experimental data and some published HETP data. The results show that the proposed model can predict the experimental data with a deviation smaller than 20 %.     

一种新型背面接触式H~+-ISFET

简要地介绍了氢离子敏场效应晶体管(H~+-ISFET)的基本结构和工作原理,提出了一种新型背面接触式H~+-ISFET。对该结构在版图、工艺设计中的有关问题,进行了探讨。最后指出:它在pH值的测量中有较好的实用价值。