信息与计算科学专业实践教学体系创新研究探析

结合专业建设对信息与计算科学专业实践教学的现状及存在的主要问题进行了分析,同时就信息与计算科学专业实践教学体系的主要内容、总体设计和组织管理方面进行了探讨,提出了按模块分层次构建实践教学内容体系的设想,对信息与计算科学专业实践教学有一定的指导意义。     

基于Creator的战场地形仿真研究

如何解决地形模型精细度、逼真度与仿真速度之间的矛盾是军事仿真的难点问题。本文研究了三维地形生成的关键技术,并详细阐述了利用MultiGen Creator建模工具,采用DEM数据和卫星遥感影像数据构建和优化大面积战场地形的原理和方法,最后结合实例生成战场地形。仿真结果表明,该方法生成的模型达到了精细度高、真实感强、实时性好等仿真要求。     

Evaluation of group effect of pile group under dragload embedded in clay

A simple semi-empirical analysis method for predicting the group effect of pile group under dragload embedded in clay was described assuming an effective influence area around various locations of pile group. Various pile and soil parameters such as the array of pile group, spacing of the piles (S), embedment length to diameter ratio of piles (L/D) and the soil properties such as density (γ), angle of internal friction (φ) and pile-soil interface friction coefficient (μ) were considered in the analysis. Model test for dragload of pile group on viscosity soil layer under surface load consolidation conditions was studied. The variations of dragload of pile, resistance of pile tip and the layered settlement of soil with consolidation time were measured. In order to perform comparative analysis, single pile was tested in the same conditions. The predicted group effect values of pile group under dragload were then compared with model test results carried out as a part of the present investigation and also with the values reported in literatures. The predicted values were found to be in good agreement with the measured values, validating the developed analysis method. The model test results show that negative skin friction of pile shaft will reach 80%–90% of its maximum value, when pile-soil relative displacement reaches 2 mm. Foundation item: Project(50679015) supported by the National Natural Science Foundation of China     

Effects of a strong polyelectrolyte on the rheological properties of concentrated cementitious suspensions

Strong polyelectrolytes, referred to as superplasticizers, are known to improve the initial fluidity of concentrated cement suspensions. To quantify how the polyelectrolytes affect the fluidity, we have studied the effect of a strong anionic polyelectrolyte, melamine formaldehyde sulfonate (MFS), on the zeta potential of cement particles and on the steady-shear and low-amplitude rheological properties of cement suspensions. Adsorption of low concentrations of MFS onto the cement particles leads to an inversion in the sign of the surface potential, causing the electrostatically flocculated particles to become electrostatically dispersed and giving rise to a corresponding decrease in the steady-shear viscosity and storage modulus. At an intermediate MFS concentration, the steady-shear viscosity and the storage modulus each display a minimum. This concentration corresponds to that at which the zeta potential becomes constant. Larger concentrations of MFS result in an increase in the viscosity and storage modulus, which is attributed to depletion flocculation. These results thus relate the interaction between particles to the suspension fluidity through the analysis on the surface potential of particles and microstructure of suspension.     

基于VB和AutoCAD的纸盒辅助设计系统

在总结现有盒型特点并对其进行科学分类的基础上,结合Visual Basic语言与AutoCAD各自优势,开发具有盒型结构的参数化设计、材料使用率与消耗量、数据存储采集等功能的包装纸盒设计系统,达到提高绘图效率,简化开发过程,实现优化设计的目的。     

基于深度学习的小样本声目标识别方法

声目标分类识别是声源识别领域的核心问题,然而,在应用深层神经网络进行声目标分类识别时,从少量样本中学习(样本复杂度较低)是一个具有挑战性的问题;针对此问题,提出了一种基于深度学习的小样本声目标识别方法,该方法将手工设计特征和对数梅尔声谱特征结合到一起,扩充了深度学习模型的可利用特征量,提高了声信号识别效率和精度;在实验验证中,该方法在测试集上实现了87.6%的识别精度;更进一步地,用较少量的训练样本对该方法和其它几种主流的深度学习模型的性能进行了比较验证,结果表明,该方法只需要更少量的数据即可实现同样的识别精度,在声源探测领域具有一定应用价值。     

Companion robots for older adults: Rodgers’ evolutionary concept analysis approach

Intelligent Service Robotics - This study aims to analyze the concept of companion robots for older adults from the perspective of nursing. This study employed a concept analysis. The literature...     

Growth and characterization of indium doped zinc oxide films sputtered from powder targets

Indium doped Zn O films were grown on quartz glass substrates by radio frequency magnetron sputtering from powder targets. Indium content in the targets varied from 1at% to 9at%. In doping on the structure, optical and electrical properties of Zn O thin films were studied. X-ray diffraction shows that all the films are hexagonal wurtzite with c-axis perpendicular to the substrates. There is a positive strain in the films and it increases with indium content. All the films show a high transmittance of 86% in the visible light region. Undoped Zn O thin film exhibits a high transmittance in the near infrared region. The transmittance of indium doped Zn O thin films decreases sharply in the near infrared region, and a cut-off wavelength can be found. The lowest resistivity of 4.3×10~(-4) Ω·cm and the highest carrier concentration of 1.86×10~(21) cm~(-3) can be obtained from Zn O thin films with an indium content of 5at% in the target.     

Synthesis and Characterization of Novel Biodegradable Poly (butylene succinate-co-triethylene glycol succinate)Copolymers

Novel biodegradable aliphatic polyesters,poly(butylene succinate-co-triethylene glycol succinate)(P(BS-co-TEGS))and poly(butylene succinate)(PBS),were synthesized through a two-step procedure of esterification and polycondensation with succinic acid and1,4-butanediol/triethylene glycol as raw materials as well as tetrabutyl titanate and diphenylphosphinic acid as the co-catalysts.The chemical structure and molecular weight of the copolymers were characterized by 1~H nuclear magnetic resonance(~1H NMR)and gel permeation chromatography(GPC),respectively.In addition,thermal properties,crystal structure and mechanical properties were also analyzed with various techniques.P(BS-co-TEGS)exhibited more excellent mechanical properties than PBS,especially in elongation at break.Meanwhile,the crystal structure and thermal stability of the P(BS-co-TEGS)have hardly changed.The crystallinity of P(BS-co-TEGS)was lower than that of PBS and decreased with the increase of mole ratio of triethylene glycol.With the increase of TEGS unit molar composition,the melting point(T_m),crystallization temperatures(T_c)and heat of fusion(ΔH_m)of P(BS-co-TEGS)decreased,while glass transition temperature(T_g)increased.