放电等离子烧结工艺对Ca3Co4O9陶瓷织构及电性能的影响

采用溶胶-凝胶与放电等离子烧结(SPS)相结合的方法制备了Ca3Co4O9陶瓷.通过X射线衍射、扫描电镜等表征手段,研究了放电等离子烧结工艺对Ca3Co4O9物相、显微结构和性能的影响.实验结果表明片状颗粒和放电等离子烧结工艺,特别是烧结温度的提高有利于Ca3Co4O9织构的形成.初步认为是片状颗粒在脉冲电流所产生的脉冲磁场作用下发生重排,使颗粒定向排列.本实验范围内,当烧结温度从700℃提高到900℃时,Ca3Co4O9晶粒取向度从0.75增大到0.87,700℃下的电阻率从6.24×10-5 Ωm降低到5.59×10-5 Ωm.此外,Ca3Co4O9块体表现出典型的半导体电学特征,电导率随着SPS烧结温度和测量温度的升高而增大,当SPS烧结温度为850℃时,P型Ca3Co4O9化合物在700℃有最大电导率.     

氯化物介质矿浆电解法浸出硫化铜精矿

研究了在ＦｅＣｌ３ＨＣｌＮａＣｌ体系中直接电解浸出硫化铜精矿矿浆制取铜粉的工艺条件及机理。试验表明，在阳极初始溶液含Ｆｅ３＋６０ｇ／Ｌ、ＨＣｌ３０ｇ／Ｌ、ＮａＣｌ１５０ｇ／Ｌ，阴阳极电流密度分别为３５０和６００Ａ／ｍ２，１００℃的条件下浸出５ｈ，可获得铜浸出率９８．８％、渣含铜０．３４％、铜粉纯度９７．５％的结果；Ｆｅ３＋浓度是影响铜浸出率最显著的因素，阳极上发生的主要反应是Ｆｅ２＋的氧化；元素硫产生的机理是酸直接分解黄铜矿生成Ｈ２Ｓ，Ｈ２Ｓ溶解后再被Ｆｅ３＋氧化。     

Network Characterizations for Excluding Braess’s Paradox

Braess’s paradox exposes a counterintuitive phenomenon that when travelers selfishly choose their routes in a network, removing links can improve the overall network performance. Under the model of nonatomic selfish routing, we characterize the topologies of k-commodity undirected and directed networks in which Braess’s paradox never occurs. Our results strengthen Milchtaich’s series-parallel characterization (Milchtaich, Games Econom. Behav. 57(2), 321–346 (2006)) for the single-commodity undirected case.     

Vibration analysis of cable-driven parallel manipulators

A cable-driven parallel manipulator is a manipulator whose end-effector is driven by a number of parallel cables instead of rigid links. Since cables always have more flexibility than rigid links, a cable manipulator bears a concern of possible vibration. Thus, investigation of vibration of cable manipulators caused by cable flexibility is important for applications requiring high system stiffness or bandwidth. This paper provides a vibration analysis of general 6-DOF cable-driven parallel manipulators. Based on the analysis of the natural frequencies of the multibody system, the study demonstrates that a cable manipulator can be designed stiff enough for special applications like the cable-manipulator based hardware-in-the-loop simulation of contact dynamics. Moreover, under an excitation, a cable may vibrate not only in its axial direction, but also in its transversal direction. The paper also analyzes the vibration of cable manipulators caused by cable flexibilities in both axial and transversal directions. It is shown that the vibration of a cable manipulator due to the transversal vibration of cables can be ignored comparing to that due to the axial flexibility of cables.     

用EXCEL宏编程完成学生分班工作

用EXCEL宏编程实现一种学生分班算去.     

Two-dimensional wavelet transform and application to holographic particle velocimetry

The goal of holographic particle velocimetry is to infer fluid velocity patterns from images reconstructed from doubly exposed holograms of fluid volumes seeded with small particles. The advantages offered by in-line holography in this context usually make it the method of choice, but seeding densities sufficient to achieve high spatial resolution in the sampling of the velocity fields cause serious degradation, through speckle, of the signal-to-noise ratio in the reconstructed images. The in-line method also leads to a great depth of field in paraxial viewing of reconstructed images, making it essentially impossible to estimate particle depth with useful accuracy. We present here an analysis showing that these limitations can be circumvented by variably scaled correlation, or wavelet transformation. The shift variables of the wavelet transform are provided automatically by the optical correlation methodology. The variable scaling of the wavelet transform derives, in this case, directly from the need to accommodate varying particle depths. To provide such scaling, we use a special optical system incorporating prescribed variability in spacings and focal length of lenses to scan through the range of particle depths.

Calculation shows, among other benefits, improvement by approximately two orders of magnitude in depth resolution. A much higher signal-to-noise ratio together with faster data extraction and processing should be attainable.

     

Coordination control method to block cascading failure of a renewable generation power system under line dynamic security

The large application of renewable energy generation (REG) has increased the risk of cascading failures in the power system. At the same time REG also provides the possibility of new approaches for the suppression of such failures. However, the capacity and position of the synchronous generator (SG) involved in regulation limit the power regulation speed (PRS) of REG to the overload line which is the main cause of cascading failures, while the PRS of SG is related to the position and shedding power. REG and SGs have difficulty in achieving effective cooperation under constraints of system power balance. Particularly, the dynamic variation of line flow during power regulation causes new problems for the accurate evaluation of line thermal safety under overload. Therefore, a new strategy for quantitatively coordinating shedding power and power regulation to block cascading failures in the dynamic security domain is proposed in this paper. The control capability and dynamic security domain of the overload line are modeled, and the coordination control method based on power regulation is then proposed to minimize shedding power. The algorithm for the optimal control scheme considers the constraints of load capacity, power source capacity and bus PRS. The correctness of the proposed method is verified using case studies.     

身份保持约束下的面部图像超分辨率重建方法

低分辨率是影响人脸识别精度的重要因素。一种有效方法是使用图像超分辨率技术对低分辨率图像重建,生成超分辨率图像后再对其作人脸识别,从而克服低分辨率面部图像对人脸识别的限制。但是,现有超分辨率方法在重建过程中往往忽略了保持其原始身份信息,这直接影响生成图像的人脸识别结果。针对上述问题,提出了一种身份保持约束下的面部超分辨率重建方法IPNet,在提高低分辨率面部图像质量的同时,能保持重建后的面部图像身份。IPNet方法将语义分割网络和面部生成器相结合,通过语义分割网络提取低维隐码和多分辨率空间特征,进而指导面部生成器输出接近于原图的真实面部图像。在此基础上引入人脸识别网络,将身份信息整合到超分辨率方法中,从而约束重建前后的面部图像身份保持一致。实验结果表明,IPNet方法在超分辨率图像质量和身份保持上均优于其他对比方法。     

基于多层匹配筛选的Web服务发现模型的研究

传统的Web服务只提供了按照简单分类和关键字的服务发现方法,因为基于语义的匹配通常也只关注服务功能性的匹配,所以通常查全率和查准率较低,且难以保证服务的快速定位.分析了现有的一些相关研究,在Web服务模型的基础上,结合逐层筛选的思想,构建了一个改进的多层匹配筛选模型,通过关键字匹配、语义匹配和QoS多维匹配进行多层匹配筛选.经过实验验证,此模型提供了一种有效的方法,可以弥补传统Web服务发现方法查准率低、功能性弱的不足,提高了Web服务发现的效率.     

CropStraw Fire Remote Sensing Monitoring and Its Algorithm Implementation

in order to obtain the information and achieve the effective control of crop straw fire spatial distribution in Central China Region.The MODIS L1B remote sensing datasets during 2014 for the main data source in this article,and combined with land use data,the farmland of Central China Region was taken as study region.Based on the enhanced contextual fire remote sensing detection algorithm,and make full use of the theoretical knowledge of quantitative remote sensing and Geospatial Data Abstraction Library (GDAL)and other technical means,to achieve the crop straw fire recognition in Central China Region.Using Ministry of Environmental Protection of the People’s Republic of China release the daily newspaper of crop straw fire in China and the standard fire products (MYD14)of MODIS for the comparative analysis of the quantitative and spatial.The results indicate that the algorithmof this paper can achieve crop straw fire remote sensing monitoring of this study region effectively,and the parameters can be adjusted in real time based on the characteristic of the study region,and improve the automation and working efficiency of crop straw fire monitoring.