Effect of SiC whiskers on the anti-oxidation properties of Yb2Si2O7/mullite/SiC tri-layer environmental barrier coating for CMCs

The mullite and ytterbium disilicate (β-Yb₂Si₂O₇) powders as starting materials for the Yb₂Si₂O₇/mullite/SiC tri-layer coating are synthesized by a sol–gel method. The effect of SiC whiskers on the anti-oxidation properties of Yb₂Si₂O₇/mullite/SiC tri-layer coating for C/SiC composites in the air environment is deeply studied. Results show that the formation temperature and complete transition temperature of mullite were 800–1000 and 1300°C, respectively. Yb₂SiO₅, α-Yb₂Si₂O₇, and β-Yb₂Si₂O₇ were gradually formed between 800 and 1000°C, and Yb₂SiO₅ and α-Yb₂Si₂O₇ were completely transformed into β-Yb₂Si₂O₇ at a temperature above 1200°C. The weight loss of Yb₂Si₂O₇/(SiC_w–mullite)/SiC tri-layer coating coated specimens was 0.15 × 10⁻³ g cm⁻² after 200 h oxidation at 1400°C, which is lower than that of Yb₂Si₂O₇/mullite/SiC tri-layer coating (2.84 × 10⁻³ g cm⁻²). The SiC whiskers in mullite middle coating can not only alleviate the coefficient of thermal expansion difference between mullite middle coating and β-Yb₂Si₂O₇ outer coating, but also improve the self-healing performance of the mullite middle coating owing to the self-healing aluminosilicate glass phase formed by the reaction between SiO₂ (oxidation of SiC whiskers) and mullite particles.     

Effect of WC particle size on the microstructure and mechanical properties of Ni–Co coarse grain cemented carbide

The effect of different WC grain size additions on the microstructure and grain distribution of Ni–Co coarse crystalline cemented carbide was studied. And then the effect of grain distribution on the mechanical properties of cemented carbide was discussed. The effect of WC grain size on the grain size and coherency of cemented carbide was analyzed by microstructure. And the distribution of grains in the microstructure was investigated by the truncation method. The addition of fine (1.1–1.4 μm), medium (2.3–2.7 μm), and coarse WC (5.6–6.0 μm) particles can increase the nucleation rate of WC grains in the bonded phase. And the higher grain growth driving force can produce the theoretical limitation of nucleation and inhibit the coarsening of WC grains to a certain extent. The WC grain size has an insignificant effect on the frequency of the occurrence of super-coarse grains in coarse crystalline cemented carbide. The average grain size and super coarse grains in microstructure gradually decrease, which promotes the improvement of transverse rupture strength. The increase of the adjacent degree and the decrease of the mean free path reduce which is beneficial to the improvement of the corrosion resistance of the alloy. The best overall performance of the alloy is achieved when fine-grained WC is added.     

Synthesis and evaluation of epoxidized vegetable oleic acid as a novel environmental benign plasticizer for polyvinyl chloride

A bio-based plasticizers, acetyl-oleate triethylene glycol (AOT), was successfully synthesized by using oleic acid as a raw material through esterification, epoxidation, and acetylation. Its structure was analyzed by Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance. The plasticizing performances of this plasticizer was compared with those of two commercial ones: dioctyl terephthalate (DOTP) and dioctyl adipate (DOA). This was done by blending these plasticizers with PVC, respectively. Thermal gravimetric analysis results showed that the 5% weight loss temperature of PVC with AOT was 53°C higher than that of DOA and 36°C higher than that of DOTP. The tensile results showed that the AOT plasticized PVC had excellent stretchability: its elongation at break with 50 phr AOT reached 697.7%. Furthermore, its transmittance was as high as 90%, showing better compatibility of ATO with PVC.     

Preparation of bichar/layered double hydroxide@alginate aerogel as a highly efficient adsorbent for Cu2+ and Cd2+

Calcium cross-linked layered double hydroxide-bichar/alginate aerogel (LBCA) was synthesized by ultrasonic-assisted hydrothermal and freeze-drying method. The Mg-Al layered double hydroxide (LDH) was successfully loaded on the bichar (BC) and the LDH-BC was dispersed uniformly in the calcium alginate aerogel, which was confirmed by X-Ray Diffraction, scanning electron microscopy and BET tests. The obtained LBCA was applied to remove the Cu²⁺ and Cd²⁺ in the aqueous solution. As compared with LDH nanosheets, removal rates of LBCA aerogel on Cu²⁺ and Cd²⁺ were ranged from 59% to 94% and 45% to 86%, respectively. The adsorption kinetic data accorded with the pseudo second-order kinetic equation, and the isotherm data were in good agreement with the Langmuir model. Moreover, LBCA aerogel showed good regeneration ability, and raw materials for the fabrication of LBCA aerogel are abundant and low price.     

Effects of mechanical recycling on optical properties and microstructure of recycled high-density polyethylene pellets and bottles

The demand for recycling high-density polyethylene (HDPE) utilizing mechanical recycling technologies is currently felt strongly by both society and industry. However, thermal oxidation of the polymer during the recycling process may lead to irreversible changes in the material properties of recycled high-density polyethylene (rHDPE). The effects of mechanical recycling on the optical characteristics and microstructure of rHDPE pellets and bottles were investigated in this study. The results revealed that the apparent color of the rHDPE became more yellow and gray compared to the virgin HDPE (vHDPE), and showed a signal at 670–680 nm in the solar reflectance spectrum. The thermal oxidation of rHDPE considerably raised the absorption intensities of carbonyl, ester, and hydroxyl groups in attenuated total reflection Fourier transform infrared spectrum. In addition, the presence of carbonyl and hydroxyl unsaturated chemicals might make it challenging to recognize the distinctive peaks of vHDPE in the ultraviolet–visible diffuse reflectance (UV–Vis-DIR) spectra at wavelengths less than 400 nm. Thermal oxidation of rHDPE was also confirmed in the C OH, CO, and O CO valence structures of C1s and O1s. A characteristic valence band (VB) profile at 25 eV can be used as the recognizable information for the oxidation of rHDPE. The microstructure of the surface of rHDPE pellets exhibited rough and uneven morphological defects. The higher recycled content made rHDPE bottles' surface morphology rougher and their cross-section microstructure thinner and more porous than vHDPE bottles.     

Study of stability of high‐temperature polyimides using TG/MS technique

The oxidative stability of the carbon fiber‐reinforced composite of polyimide was examined, in real time, using the evolved gas analysis techniques. Off‐gas degradation products suggested the onset temperature for chain scissions to be fairly low at about 190–220°C. Based on the off‐gas products present and the trend of their release, the composite degradation mechanism appeared to be similar between 190 and 371°C, thereby marking 371°C to be the highest accelerated aging temperature for its long‐term lifetime prediction. Beyond 371°C, different degradation mechanisms would apply. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1219–1227, 2002     

Preparation and characterization of porous carbon beads and their application in dispersing small metal crystallites

Porous carbon beads were prepared by the pyrolysis of poly(vinylidene chloride) beads that were synthesized by suspension polymerization. After prolysis treatment at 180–300 °C under argon stream, the polymeric beads were further carbonized at 1000 °C for 3 h under argon stream to acquire porous carbon beads, of which the specific surface area was about 1000 m²/g, and pore size was mainly in the width range of 0.8–1.2 nm. The carbon structure and surface chemical composition characterized by X-ray diffraction and X-ray photoelectron spectroscopy, depended on the preparation temperature and the relations between them were examined. The characterization of the carbon beads by scanning electron microscopy, atomic force microscopy presented the morphological structure of the carbon beads surface and a global view of pores. The dispersion of nickel crystallites on the carbon beads surface was characterized by electron microprobe analysis. This study reveals that uniform surface morphological structure leads to the fine dispersion of metal crystallites.     

环境监测报告格式规范的探讨

按照GB/T15481-2000《检测和校准实验室能力的通用要求》标准的要求,以环境监测废水监测报告为例,来探讨监测报告设计的格式要求。     

神经网络在聚合过程中的应用

介绍了神经网络在聚合反应过程中的建模，预测、优化，控制和故障诊断及模式识别方面的应用，讨论了其优点和局限性，并分析今后神经网络的发展趋势。     

L-肉碱的酶法生产

要L-肉碱是与动物体内脂肪酸代谢有关的化合物,主要功能是作为载体将长链脂肪酸从线粒体膜外输送到膜内促进脂肪酸的β-氧化,将脂肪代谢转变为能量。L-肉碱广泛用于医药、保健食品及饲料等行业。江苏省微生物研究所在成功解决了高转化率微生物酶的选育、肉碱与巴豆甜菜碱的分离技术和巴豆甜菜碱的回收问题后,开发了L-肉碱的微生物酶法生产技术,并与常茂生物化学工程有限公司合作进行了日产1kg规模的中试,用300L发酵罐发酵产酶,150L酶反应器进行酶转化,L-肉碱的发酵水平达15g/L以上,用401L有机玻璃层析柱系统提取精制,提取收率达70％以上,产品质量符合USP23版标准。