Synthesis and characterization of block copolymers from D,L-lactide and poly(tetramethylene ether glycol)

The copolymer from D ,L -lactide and poly(tetramethyene ether glycol) (PTMG) was prepared in bulk with an isotributyl aluminum–water–phosphoric acid complex catalyst as the initiator and characterized by H-NMR, GPC, and DSC. The effects of the temperature and the amount of PTMG on the polymerization rate and the molecular weight of copolymers were studied. The behavior of the degradation and delivery rate of Levonorgestrel microspheres in vitro was observed. The results show that the degradation and the delivery rate can be controlled by adjusting the molar rate of hydrophilic and hydrophobic segments of the copolymer © 1995 John Wiley & Sons, Inc.     

两种具有电双稳态的全有机络合物

首次发现两种在室温下即具有电双稳态的全有机（有机-有机）络合物，分别称为MCA＋TCNQ和BBDN＋TCNQ。它们可在真空中制备成薄膜，在数伏电压的作用下，从高电阻至低电阻的跃迁时间小于100ns，因此可作为一次写入的存储器材料。根据我国目前最小刻线宽度的水平，可望在1．6cm2的SiO2平面上做出64Mb的存储器。     

Stochastic TCP friendliness: Expanding the design space of TCP-friendly traffic control protocols

While the current definition of TCP friendliness has enabled a wide variety of traffic control protocols other than TCP, it still considerably restricts the design space of TCP-friendly traffic control protocols. For example, some multimedia streaming applications prefer a smooth sending rate on a time scale of tens of seconds, however, a UDP flow maintaining such a long smoothness time scale is naturally not TCP friendly by the current definition. In this paper, we propose an innovative method to relatively compare the degrees of TCP friendliness of different traffic control protocols, and use it to define a new class of TCP friendliness definitions, called stochastic TCP friendliness (STF). STF greatly expands the design space of TCP-friendly traffic control protocols, while still effectively maintaining the desired fairness of the Internet. To demonstrate the expanded design space, we also develop a new congestion control protocol, called TCP-friendly CBR-Like Rate Control (TFCBR), for multimedia streaming applications which do not require a high sending rate but prefer a smooth sending rate on a time scale of tens of seconds. TFCBR is stochastically TCP friendly, however, it is not TCP friendly by the current definition.     

Pd/Mg(OH)2 Heterogeneous Nanocatalysts Synthesized by a Facile One-Pot Hydrothermal Method for CO Direct Esterification to Dimethyl Oxalate

Catalysis Letters - Pd-based heterogeneous nanocatalysts have wide application in chemical industry. However, the traditional synthesis process contains multi-steps such as impregnation, dry,...     

超滤在明胶生产中的应用

本文研究了超滤在明胶生产中的应用,超滤作为初级浓缩是可行的。同时,对超滤设备、超滤膜与工艺条件作了讨论。     

高吸水性树脂的性能及应用

综述了高吸水性树脂的性能及其应用，并预测其广阔的开发前景。     

国产脱砷剂及其应用

介绍了石油烃中砷的存在形式 ,石脑油中砷含量及对催化剂的危害 ,分析了脱砷机理 ,阐述了国产脱砷剂的类型、型号、特点 ,以及选用原则与工业应用情况。     

Synthesis,characterization, and thermal properties of phosphorus‐containing,wholly aromatic thermotropic copolyesters

A series of phosphorus‐containing, wholly aromatic thermotropic copolyesters from acetylated 2‐(6‐oxide‐6H‐dibenz〈c,e〉〈1,2〉oxa phosphorin‐6‐yl)‐1,4‐dihydroxy phenylene, p‐acetoxybenzoic acid, terephthalic acid, and isophthalic acid were prepared by melting polycondensation. The structure and basic properties of the polymers, such as the glass‐transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity, were investigated with Fourier transform infrared, elemental analysis, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray diffraction, and hot‐stage polarizing optical microscopy. The copolyesters had relatively high T_g values ranging from 183 to 192°C. The T_m values obtained from DSC curves for samples P‐20 and P‐25 were 290 and 287°C, respectively (where the number in the sample name indicates the molar fraction of the phosphorus‐containing monomer in the reactants). The initial flow temperatures of other samples observed with hot‐stage polarizing microscopy were 271–290°C. The 5% degradation temperatures in nitrogen ranged from 431 to 462°C, and the char yields at 640°C were 41–52%. All the copolyesters, except P‐40, were thermotropic and nematic. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1278–1284, 2002