Comparison of Canola and Soy Flour with Added Isocyanate as Wood Adhesives

Canola is widely grown in the northern latitudes for its vegetable oil, generating large quantities of residual, low value canola flour used as animal feed. The common wood adhesive poly(diphenylmethylene diisocyanate) (pMDI) should react with the wide variety of functional groups in proteins. Therefore, it would seem that canola flour with added pMDI could be an effective adhesive. Two main questions are addressed in this study: How do the wood adhesive properties of canola flour compare to the better-studied soy flour? How well do proteins, which contain an abundance of functional groups, cure with the very reactive pMDI? These questions were addressed using the small-scale adhesive strength test ASTM D-7998, with various adhesive formulations and bonding conditions for canola flour plus pMDI compared to soy adhesives. The more challenging wet cohesive bond strength was emphasized because the dry strengths were usually very good. Generally, soy adhesives were better than canola ones, as was the polyamidoamine-epichlorohydrin cross-linker compared to pMDI, but these generalizations can be altered by the conditions selected. Three-ply plywood tests supported the small-scale test results.     

Crystallization of P Type Amorphous Silicon (a-Si: H) by AIC Method: Effect of Aluminum Thickness

In this work, we will study the crystallization of P type hydrogenated amorphous silicon (a-Si:H) by Aluminum Induced Crystallization technique (CIA) by varying the thickness of the aluminum films. We have deposited a 100 nm thickness of p-type a-Si:H layer on Corning glass substrates using PECVD technique. An aluminum layer with thickness ranging from 10 to 400 nm was thermally evaporated on the a-Si:H surface. The thermal annealing was performed in a conventional furnace at temperature of 550 °C for 4 h in flowing N2 ambient. The study of the crystallization of the Al/a-Si:H/Glass structure according the aluminum thickness was carried out by using Raman spectroscopy, X-rays diffraction and Hall Effect measurements. Raman results reveal the presence of the peaks between 510 and 520 cm−1, which are close to the peak of crystallized Si (about 521 cm−1) proving the crystallization of all samples. The XRD measurements show the presence of the characteristic peaks of the crystalline silicon, thus the a-Si: H (p) layer was effectively crystallized by the AIC method in a short time. Through Hall measurements we found an improvement in electrical properties and an increase in dopant concentration (+ 5.3 1014 to + 2.9 1017 cm2).     

Influence of Electron Beam Irradiation on High‐Temperature Mechanical Properties of Ethylene Vinyl Acetate/Carbon Fibers Composites

The purpose of this study was to investigate the effect of carbon fiber (CF) and electron‐beam (EB) radiation on high‐temperature mechanical properties of ethylene‐vinyl acetate (EVA). Polymer composites were prepared by mixing on a two‐roll mill. After compression molding, the samples were irradiated between 60 and 180 kGy, and dynamic mechanical analysis (DMA) was used to characterize physical properties. The effects of filler content and radiation level on the mechanical properties of EVA/CF were evaluated. The shear stress and modulus were observed to increase with increasing of the filler level. However, there was a dramatic decrease in creep compliance. It was also shown that introduction of irradiation on EVA composite increases the shear stress and the real part of the dynamic shear modulus G' due to the increase in molecular weight and cross‐linking of the polymer after irradiation. J. VINYL ADDIT. TECHNOL., 26:325–335, 2020. © 2019 Society of Plastics Engineers     

Effects of SiC content on the densification,microstructure, and mechanical properties of HfB2–SiC composites

To investigate the effects of SiC on microstructure, hardness, and fracture toughness, 0, 10, 20, and 30 vol% SiC were added to HfB₂ and sintered by SPS. Upon adding SiC to 30 vol%, relative density increased about 4%; but HfB₂ grain growth had a minimum at 20 vol% SiC. This may be due to grain boundary silicate glass, responsible for surface oxide wash out, enriched in SiO₂ with higher fraction of SiC. By SiO₂ enrichment, the glass viscosity increased and higher HfO₂ remained unsolved which subsequently lead to higher grain growth. Hardness has increased from about 13 to 15 GPa by SiC introduction with no sensible variation with SiC increase. Residual stress measurements by Rietveld method indicated high levels of tensile residual stresses in the HfB₂ Matrix. Despite the peak residual stress value at 20 vol% SiC, fracture toughness of this sample was the highest (6.43 MPa m^0.5) which implied that fracture toughness is mainly a grain size function. Tracking crack trajectory showed a mainly trans-granular fracture, but grain boundaries imposed a partial deflection on the crack pathway. SiC had a higher percentage in fracture surface images than the cross-section which implied a weak crack deflection.     

Expression of Main Toll-Like Receptors in Patients with Different Types of Colorectal Polyps and Their Relationship with Gut Microbiota

Abnormal activation of Toll-like receptor (TLRs) signaling can result in colon cancer development. The aim of this study was to investigate the expression of important TLRs in different histological types of colorectal polyps and evaluate their relationship with intestinal microbiota. The expression levels of TLR2, 3, 4, and 5 were analyzed in intestinal biopsy specimens of 21 hyperplastic polyp (HP), 16 sessile serrated adenoma (SSA), 29 tubular adenoma (TA), 21 villous/tubulovillous (VP/TVP) cases, and 31 normal controls. In addition, selected gut bacteria including Streptococcus bovis, Enterococcus faecalis, Enterotoxigenic Bacteroides fragilis (ETBF), Fusobacterium nucleatum, Porphyromonas spp., Lactobacillus spp., Roseburia spp., and Bifidobacterium spp. were quantified in fecal samples using absolute qRT PCR, and, finally, the association between TLRs and these gut microbiota- was evaluated by Spearman’s correlation coefficient. Higher expression of TLR2 and TLR4 in VP/TVP and TA, and lower expression levels of TLR3 and TLR5 in all type of polyps were observed. The differences in TLR expression patterns was not only dependent on the histology, location, size, and dysplasia grade of polyps but also related to the intestinal microbiota patterns. TLR2 and TLR4 expression was directly associated with the F. nucleatum, E. faecalis, S. bovis, Porphyromonas, and inversely to Bifidobacterium, Lactobacillus, and Roseburia quantity. Furthermore, TLR3 and TLR5 expression was directly associated with Bifidobacterium, Roseburia, and Lactobacillus quantity. Our results suggest a possible critical role of TLRs during colorectal polyp progression. An abnormal regulation of TLRs in relation to gut microbial quantity may contribute to carcinogenesis.     

A comparative study on citrate sol-gel and combustion synthesis methods of CoAl2O4 spinel

CoAl₂O₄ spinel was successfully synthesized by combustion synthesis method using glycine and urea by 1:1 molar ratio as fuels and sol-gel process using citric acid as a chelating agent. The as-synthesized powders were calcined at desired temperatures to obtain CoAl₂O₄ spinel as a single phase. X-ray diffraction, thermogravimetric, and differential thermal analysis results revealed that the formation of CoAl₂O₄ spinel in combustion method needs 300°C higher temperatures than those of sol-gel. Scanning electron microscopy and transmission electron microscopy analysis results revealed that “sol-gel spinel” had nanometric particle size which was smaller than those of “combustion spinel.” Temperature programed reduction with hydrogen and Fourier transform infrared spectroscopy results declared that there was a little residual cobalt oxide in combustion spinel while there is no oxide resided in “sol-gel spinel.” Consequently, the sol-gel method has more benefit in synthesizing spinel with sulfate precursors than combustion.     

Polymer lifetime studies in hostile environments

Photo-oxidative degradation reactions are mainly responsible for reduced lifetime in polymers. These reactions are responsible for the decay in useful physical and chemical properties of polymers. In addition to high ultraviolet radiation doses, hostile environments have increased temperature, high humidity, and air-borne sand. In this work white pigmented polyvinyl chloride (PVC) pipe sections were exposed to natural weather at seven different locations. Characterization studies were made on exposed samples using Fourier transform infrared (FTIR) spectroscopic, gel permeation chromatographic (GPC), and scanning electron microscopic (SEM) studies. Performance characteristics were determined by testing changes in the mechanical properties. Functional groups introduced during the processing of PVC and irregularities in the polymer chain can be held responsible for the initiation and propagation of photo-oxidative degradation reactions catalyzed by high surface temperature and increased humidity.     

Characterization of vegetable oils‐alumina membranes interactions by diffuse reflectance Fourier transform infrared spectroscopy

Adsorption of vegetable oil components, either as pure molecules or as mixtures, on alumina membranes was investigated by diffuse reflectance Fourier transform infrared spectroscopy. All tested compounds displayed very similar spectra. Triolein and diolein physically adsorb onto alumina by hydrogen bonding with the carbonyl groups of the carboxylic ester and surface hydroxyls. Monolein most likely interacts with glycerol hydroxyls, while phospholipids appear to adsorb either by the ester carbonyl or charged phosphate group. Due to the catalytic properties of alumina some hydrolysis takes place during treatments. The resulting oleic acid, most likely chemisorbs by ionic interactions with the carboxylic C=O bond of the alumina. The fact that no change in the symmetric and asymmetric CH₂ stretches is noticed in comparison with the free (unbound) form indicates that the molecules are not parallel, but at an angle to the surface. When alumina comes into contact with increasing amounts of crude vegetable oils a broadening of the band at 3280 cm^‐1 indicates an increasing adsorption of molecules with free hydroxyls, such as mono‐ and di‐acylglycerols or phospholipids. Among all oil components, sodium oleate seems to adsorb preferentially to alumina. However, a subsequent adsorption of a lipidic monolayer at the membrane surface or even inside the pores, is not consistent with the drastic flux reduction observed in previous studies during microfiltration, and could only initiate formation or/and deposition of macromolecular structures inside membrane pores.     

Determination of 4-nonylphenol and 4-tert-octylphenol compounds in various types of wastewater and their removal rates in different treatment processes in nine wastewater treatment plants of Iran

Alkylphenols(APs), considered as xenoestrogenic compounds, mainly exist as 4-nonylphenol(4-NP) and 4-tertoctylphenol(4-t-OP) in environments. The high stability and accumulation of APs in aquatic systems have caused endocrine disruption. In this study we measured APs in the wastewater influent and effluent samples, from the urban, rural, livestock, commercial and hospital wastewater treatment plants(WWTPs) in Iran. Dispersive liquid–liquid microextraction(DLLME) combined with gas chromatography–mass spectrometry(GC–MS) was used for the extraction and determination of 4-NP and 4-t-OP. In these treatment plants, various processes such as activated sludge, aerated lagoon, moving bed biofilm reactor and activated sludge along with wetland were applied. The highest concentration of 4-NP and 4-t-OP was observed in commercial and livestock sewages. The activated sludge along with wetland and then the MBBR process showed the highest removal rates of pollutants. The rates of biodegradability and accumulation in sludge were determined and also the specific adsorption coefficient Kdand the organic carbon–water partition coefficient kOCof the sludge for APs were calculated.