The APOA5-rs662799 Polymorphism Is a Determinant of Dyslipidemia in Vietnamese Primary School Children

Apolipoprotein A-V encoded by apolipoprotein 5 (APOA5) gene plays an important role in lipid metabolism, especially in the regulation of plasma triglycerol levels. The study aimed to evaluate the association of the APOA5-rs662799 polymorphism with dyslipidemia in Vietnamese children and the potential modification of obesity-related traits (body mass index, waist circumference, hip circumference, and waist-to-hip ratio) on this association. A case–control study was conducted with a total of 154 dyslipidemia cases and 389 controls at the age of 6 to 10 recruited at 31 primary schools in Hanoi city of Vietnam. Genotype for APOA5-rs662799 polymorphism was determined by the restriction fragment length polymorphism analysis. The association of APOA5-rs662799 polymorphism with dyslipidemia adjusting for age, sex, residence, and obesity-related traits was analyzed by binary logistic regression analysis. The results showed that in comparison with T/T and T/C carriers, the C/C carriers had a higher concentration of serum TAG in cases (p =0.049). Carriers of the C allele (C/C + T/C) had higher risk for developing dyslipidemia and hypertriglyceridemia than subjects with T/T genotype (odds ratio, OR = 1.7, p =0.0062 and OR = 1.6, p = 0.026, respectively). The association remained significant after adjusting for age, gender, residence, and obesity status (OR = 1.75, p = 0.006 and OR = 1.53, p = 0.049, respectively) or other obesity-related traits. The study suggested that the APOA5-rs662799 polymorphism may be a determinant of dyslipidemia and hypertriglyceridemia in Vietnamese children, independent of obesity-related traits.     

A Novel 1,8-Naphthyridine-2-Carboxamide Derivative Attenuates Inflammatory Responses and Cell Migration in LPS-Treated BV2 Cells via the Suppression of ROS Generation and TLR4/Myd88/NF-κB Signaling Pathway

Novel 1,8-naphthyridine-2-carboxamide derivatives with various substituents (HSR2101-HSR2113) were synthesized and evaluated for their effects on the production of pro-inflammatory mediators and cell migration in lipopolysaccharide (LPS)-treated BV2 microglial cells. Among the tested compounds, HSR2104 exhibited the most potent inhibitory effects on the LPS-stimulated production of inflammatory mediators, including nitric oxide (NO), tumor necrosis factor-α, and interleukin-6. Therefore, this compound was chosen for further investigation. We found that HSR2104 attenuated levels of inducible NO synthase and cyclooxygenase 2 in LPS-treated BV2 cells. In addition, it markedly suppressed LPS-induced cell migration as well as the generation of intracellular reactive oxygen species (ROS). Moreover, HSR2104 abated the LPS-triggered nuclear translocation of nuclear factor-κB (NF-κB) through inhibition of inhibitor kappa Bα phosphorylation. Furthermore, it reduced the expressions of Toll-like receptor 4 (TLR4) and myeloid differentiation factor 88 (MyD88) in LPS-treated BV2 cells. Similar results were observed with TAK242, a specific inhibitor of TLR4, suggesting that TLR4 is an upstream regulator of NF-κB signaling in BV2 cells. Collectively, our findings demonstrate that HSR2104 exhibits anti-inflammatory and anti-migratory activities in LPS-treated BV2 cells via the suppression of ROS and TLR4/MyD88/NF-κB signaling pathway. Based on our observations, HSR2104 may have a beneficial impact on inflammatory responses and microglial cell migration involved in the pathogenesis of various neurodegenerative disorders.     

The production of volatile compounds in model casein systems with varying fat levels as affected by low-frequency ultrasound

The effects of low-frequency ultrasound on the production of volatile compounds in model casein protein systems containing various fat concentrations of 2%, 4% and 6% (w/w) were investigated. Ultrasound application was performed at 20 kHz for up to 10 min which corresponded to energy densities ranging from 9.54 to 190.8 J mL⁻¹. Similar volatile compounds were detected both in pure fat and mixtures of casein and fat (CF) systems. These volatiles belonged to the groups of aldehydes, ketones, esters, alcohols and hydrocarbons, which were the products of oxidation of lipids or protein degradation due to acoustic cavitation. The amount of fat in the casein systems had minor effects on the production of volatiles, whereas the production of volatile compounds was significantly affected by the ultrasound treatment. Short sonication times <5 min generated similar volatile profiles to the untreated samples. In contrast, prolonged sonication for 5 and 10 min considerably increased the production of volatile compounds and the amounts of fatty acids. Thus, the application of low–frequency ultrasound for short periods should be considered to minimise the production of volatile compounds which can ultimately affect the taste.     

New Results on Reachable Sets Bounding for Switched Neural Networks Systems with Discrete,Distributed Delays and Bounded Disturbances

Neural Processing Letters - In this paper, problem of reachable sets bounding is considered for switched neural networks systems with mixed time-varying delays and bounded disturbances. By using...     

A new route of emulsifier-free emulsion polymerization for the preparation of polymer coated magnetite nanoparticles

A new route of emulsifier-free emulsion polymerization based on the homogenous mechanism was investigated to prepare magnetic nanoparticles coated by poly (methyl methacrylate) (PMMA). The experimental results confirm the formation of PMMA thin and unique layers covering magnetite cores. The polymer layer thickness, determined from transmission electron microscopy (TEM) images, increases from 4.3 nm to 6.8 nm with increasing mass ratio of MMA to magnetite from 3:1 to 11:1. The increase of the polymer thickness results in the decrease in magnetization saturation of polymeric coated magnetic particles. However, this reduction, no more than 13 emu g^?1, is much lower compared to that in other studies with the presence of surfactants or emulsifiers. Besides, the dispersion stability of the prepared particles is significantly improved.     

On data dependence of stability domains,exponential stability and stability radii for implicit linear dynamic equations

We shall deal with some problems concerning the stability domains, the spectrum of matrix pairs, the exponential stability and its robustness measure for linear implicit dynamic equations of arbitrary index. First, some characterizations of the stability domains corresponding to a convergent sequence of time scales are derived. Then, we investigate how the spectrum of matrix pairs, the exponential stability and the stability radii for implicit dynamic equations depend on the equation data when the structured perturbations act on both the coefficient of derivative and the right-hand side.     

Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing

Bulk ultrafine-grained nickel specimens having grain sizes in the range of 0.25-5 μm were consolidated by hot isostatic pressing technique. The resulting microstructures were characterized by transmission electron microscopy and X-ray diffraction analysis. Compression tests were carried out at room temperature and at strain rate of 1.6×10⁻⁴ s⁻¹. It was found that the measured yield strength does not follow the Hall-Petch law as a consequence of the presence of oxide phase. Therefore, the use of micromechanics based model, which takes into account only the Hall-Petch relationship at grain level for predicting the grain sized effects on mechanical behavior of this kind of materials, is not accurate yet. In this study, a modification made to the generalized self-consistent model was proposed for studying both grain size and oxide phase dependence of ultrafine-grained materials behavior. Because of the novel modification, an optimization procedure with two steps was required to identify the parameters of micromechanical model. An acceptable agreement between experimental and numerical results was achieved. Moreover, the influence of texture on the yield strength and the application of the proposed model to the spark plasma sintering processed materials were also discussed.     

A revisited generalized self-consistent polycrystal model following an incremental small strain formulation and including grain-size distribution effect

A generalized self-consistent approach, recently proposed by Jiang and Weng (2004) [B. Jiang, G.J. Weng, A generalized self-consistent polycrystal model for the yield strength of Nanocrystalline materials, Journal of the Mechanics and Physics of Solids 52 (2004a) 1125-1149; B. Jiang, G.J. Weng, A theory of compressive yield strength of nano-grained ceramics, International Journal of Plasticity 20 (2004b) 2007-2056.] for investigating the so-called “breakdown” of the Hall-Petch law in the case of nanocrystalline (NC) materials, is revisited and reformulated following an incremental small strain scheme. The NC material is modelled as a composite material that takes each oriented grain and its immediate grain boundary to form a pair, which in turn is embedded in the infinite effective medium with a property representing the average orientation of all these pairs. The plastic deformation of the inclusion phase takes into account the dislocation glide mechanism whereas boundary phase is modelled as an amorphous material. As an application, the model’s parameters are identified under an optimization code with respect to data stated from pure copper submitted to tensile load. The aggregate is composed of spherical randomly distributed grains with a grain-size distribution following a log-normal statistical function.     

Investigations of Local Corrosion Behavior of Plasma-Sprayed FeCr Nanocomposite Coating by SECM

FeCr alloy coating can be sprayed on low-carbon steel to improve the corrosion resistance because of FeCr alloy’s high anti-corrosion capacity. In this paper, Fe microparticles/Cr nanoparticles coating (NFC) and FeCr microparticles coating (MFC) were prepared by atmospheric plasma spraying and NFC was heat-treated under hydrogen atmosphere at 800 °C (HNFC). EDS mapping showed no penetration of Ni in MFC and NFC while penetration of Ni occurred in HNFC. X-ray diffraction results indicated the form of the NiCrFe (bcc) solid solution in HNFC. SECM testing in 3.5 (wt.%) NaCl revealed that the anti-corrosion capacity of NFC improved compared with MFC, while HNFC improved further.