Optical properties and laser performance of neodymium doped fluoroapatites SrxCa5−x(PO4)3F (x = 0, 1, 2, 3, 4, and 5)

Nd doped fluoroapatites Sr_xCa_5−x(PO₄)₃F(S_xC_5−xPF, X = 0, 1, 2, 3, 4, and 5) single crystals have been grown by the Czochralski technique. Their polarized absorption and emission spectra have been recorded at room temperature and used to calculate the absorption and stimulated emission cross sections. Broadening of the absorption and emission bands is observed for Nd³⁺ in the solid solutions SPF-CPF compared to Nd³⁺ in CPF or SPF. 1% Nd:S_xC_5−xPF, X = 0, 2, 3, 4, and 5, laser rods have been tested in a cavity longitudinally pumped by a 1 W AlGaAs laser diode and compared to Nd:YAG and Nd:YVO₄ rods. All fluoroapatites exhibit very good laser performance with low thresholds and high slope efficiencies, higher than in the case of YAG and equal to the YVO₄ samples. The dependance of the laser output power versus the diode temperature has also been measured for all materials. The laser output was found to be as sensitive to the diode temperature fluctuations for fluoroapatites as for YAG.     

Characterization of titanium alloy implant surfaces with improved dissolution resistance

The present work sets out to investigate the structure and chemistry of surface treated oxides (either aged in boiling water or air-heated) with improved dissolution resistance compared to conventionally passivated surfaces. X-ray photoelectron spectroscopy (XPS) has demonstrated a significant reduction in oxidized aluminium associated with an ageing-based surface treatment. Angle-dependent XPS has revealed an increase in amphoteric-OH surface sites for the thermal treatments. Atomic force microscopy (AFM) investigation suggests that these sites play a role in the improved proteinadsorption properties of these surfaces. These observations form the basis of a model which describes the influence of surface oxide on the kinetics of metal ion dissolution.     

D-KAT: a deep knowledge acquisition tool

Abstract: This paper describes a system of shallow and deep knowledge acquisition and representation for diagnostic expert systems. The acquisition system is integrated into a diagnostic expert system shell. Shallow knowledge is represented in a failure model as a set of cause-effect relations among the possible faults, while deep knowledge is represented in three deep models: a functional, a deep causal and a taxonomic model. The acquisition and the representation of all the models are fully integrated. The deep knowledge is used by the final expert system in order to provide the user with deep explanations of the cause-effect relations of the failure model.     

Drugs, memory, and metamemory: A dose-effect study with lorazepam and scopolamine.

This experiment was designed to use the graded dose-related amnesia produced by the benzodiazepine lorazepam (1.0, 2.0 mg/70 kg, oral) and the anticholinergic scopolamine (0.3, 0.6 mg/70 kg, subcutaneous) as a tool to explore the cognitive and neurochemical mechanisms underlying metamemory in the judgment of learning paradigm, with a placebo-controlled independent groups design in healthy volunteers (n=12/group). Results provide evidence for a pharmacological dissociation between effects on memory versus metamemory (relative accuracy of item-by-item monitoring) across a range of levels of memory performance and suggest that the drugs selectively impair those aspects of metamnemonic monitoring that require participants' awareness of their overall current state of functioning (absolute accuracy of prospective item-by-item monitoring, prospective global monitoring) but not those that rely solely on assessment of individual item characteristics (relative accuracy of item-by-item monitoring). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A Programmable Pulse Sequence Generator for an NMR Relaxometer

A pulse sequence generator for NMR relaxometer is described. The operation mode is loaded into the internal memory of the device by a program from a personal computer via a PCI bus. The project is realized on two MAX7000S and Cyclone (Altera) chips using the Qartus II 4.0 software. The basic parameters of the device are as follows: the minimal pulse length is 50 ns, the time resolution is 10 ns, the maximum number of pulses is 1024, and the number of controlled output channels is 8. This device, operating in the automatic mode as part of the hardware-software NMR system, makes possible recording, processing, and storing experimental results in electronic form.     

Mass customization of medical devices and implants: state of the art and future directions

The medical field is one in which the need for customization can be clear cut, as providing tailored devices and implants for unique physiologies can provide for a better overall treatment than the use of 'off the shelf' devices and implants. Customization in the production of medical products can be roughly divided into consideration of medical devices, and of implantable parts or systems. The present paper outlines the current state of the art in both of these areas, presents details of projects that are ongoing at the University of Leeds and outlines future research directions.     

Technological strategies to improve photostability of a sunscreen agent

Due to the reduction of the ozone layer, there is an increasing need of effective UV protection systems with minimized side-effects. Trans-2-ethylhexyl- p -methoxycinnamate ( trans -EHMC) represents one of the most widely used sunscreen compound. Several studies demonstrated that trans -EHMC is unstable following UV irradiation both in solution and in emulsion formulations. Moreover, various reports of photocontact sensitization induced by trans -EHMC have appeared in the literature. Consequently, in order to ensure adequate efficacy and safety for this sunscreen agent, there is a need for new carrier systems to enhance trans -EHMC photostability. In the present study the photostability of the filter in different formulation types (emulsion–gel, gel and emulsion) with various ingredients is evaluated. In addition, nanoparticles based on poly- D , L -lactide-co-glycolide (PLGA) as carrier for trans -EHMC are investigated. The influence of nanoparticle matrix on the photochemical stability of the sunscreen agent is also presented. The results obtained demonstrated that PLGA nanoparticles are effective in reducing the light-induced degradation of the sunscreen agent. Moreover, the choice of formulation type and the excipients used play an important role in order to obtain a stable cosmetic product containing trans -EHMC.     

Syntax and consistent equation semantics of hybrid Chi

The hybrid χ (Chi) formalism integrates concepts from dynamics and control theory with concepts from computer science, in particular from process algebra and hybrid automata. It integrates ease of modeling with a straightforward, structured operational semantics. Its ‘consistent equation semantics’ enforces state changes to be consistent with delay predicates, that combine the invariant and flow clauses of hybrid automata. Ease of modeling is ensured by means of the following concepts: (1) different classes of variables: discrete and continuous, of subclass jumping or non-jumping, and algebraic; (2) strong time determinism of alternative composition in combination with delayable guards; (3) integration of urgent and non-urgent actions; (4) differential algebraic equations as a process term as in mathematics; (5) steady-state initialization; and 6) several user-friendly syntactic extensions. Furthermore, the χ formalism incorporates several concepts for complex system specification: (1) process terms for scoping that integrate abstraction, local variables, local channels and local recursion definitions; (2) process definition and instantiation that enable process re-use, encapsulation, hierarchical and/or modular composition of processes; and (3) different interaction mechanisms: handshake synchronization and synchronous communication that allow interaction between processes without sharing variables, and shared variables that enable modular composition of continuous-time or hybrid processes. The syntax and semantics are illustrated using several examples.     

A benchmark on the calculation of kinetic parameters based on reactivity effect experiments in the CROCUS reactor

Measurements in the CROCUS reactor at EPFL, Lausanne, are reported for the critical water level and the inverse reactor period for several different sets of delayed supercritical conditions. The experimental configurations were also calculated by four different calculation methods. For each of the supercritical configurations, the absolute reactivity value has been determined in two different ways, viz.: (i) through direct comparison of the multiplication factor obtained employing a given calculation method with the corresponding value for the critical case (calculated reactivity: ρ_calc); (ii) by application of the inhour equation using the kinetic parameters obtained for the critical configuration and the measured inverse reactor period (measured reactivity: ρ_meas). The calculated multiplication factors for the reference critical configuration, as well as ρ_calc for the supercritical cases, are found to be in good agreement. However, the values of ρ_meas produced by two of the applied calculation methods differ appreciably from the corresponding ρ_calc values, clearly indicating deficiencies in the kinetic parameters obtained from these methods.