A luminosity monitor system for the JETSET experiment at LEAR

A luminosity-monitor system for the JETSET experiment at LEAR is described. Four silicon-strip detectors are used as position sensitive devices to monitor the elastic p-scattering. The design concept, data-acquisition and results of the detector system are presented. On-line monitoring is used to assure the proper operation of the JETSET experiment.     

ON THE GLOBAL AND LOCAL STRUCTURAL PROPERTIES OF PACKED BEDS OF NONEQUILATERAL CYLINDRICAL PARTICLES

The structure of a series of packed beds of non-equilateral cylindrical particles has been investigated and compared with those of beds of spheres and equilateral cylinders of similar dimensions. It is found that the mean voidage of beds of equilateral cylinders is consistently lower than the corresponding values for beds of spheres and non-equilateral cylinders of aspect ratios 0.25, 0.5, 2 and 3. End effects do not appear to be present in beds of cylinders of aspect ratios of 0.25 and 0.5 and generally, both wall and end effects are significantly weaker than corresponding effects in beds of spheres and equilateral cylinders. This suggests that chanelling is reduced in beds of non-equilateral cylindrical pellets. Whilst the axial voidage distribution of beds of non-equilateral cylinders appears to be almost uniform, the radial voidage distribution bears the effect of confining walls and an oscillatory profile is observed in most cases, but is seen to be irregular for aspect ratios 0.25 and 0.5. The orientation effect of particles of aspect ratio 0.25 in adjacent layers causes an irregular pattern in the axially averaged radial voidage distribution. Observed axially averaged radial voidage profiles suggest that a uniform structure may be achieved by modifying the basic cylindrical shape.     

Effect of beam voltage on the properties of aluminium nitride prepared by ion beam assisted deposition

The effects of nitrogen-beam voltage on the structure, stress, energy band gap and hardness of AIN thin films deposited on Si (111), Si (100) and sapphire (0001) by ion beam assisted deposition (IBAD) are reported. As the nitrogen-beam voltage was increased from 50 to 200 V, the stress and disorder in the AIN films increased as determined by X-ray diffraction, FTIR and Raman spectroscopy. The preferred orientation of the film's c-axis changed from completely normal to the film at 100 V, to a mixture of normal and in the plane of the film at 200 V. For AIN films deposited under the same conditions, the films were more highly oriented on sapphire (0001) than in Si (111). The hardness of the films increased from 18.2 to 23.7 GPa with the nitrogen-beam voltage, and possible reasons for this change in hardness are considered.     

Corrosion fatigue short crack growth behaviour in a high strength steel

The influence of an aggressive environment (0.6 M, aerated NaCl solution) on short fatigue crack initiation and growth behaviour has been studied. The study involved three major test series, namely: air fatigue, corrosion fatigue, and intermittent air fatigue/corrosion fatigue. The above tests carried out under fully reversed torsional loading conditions at a frequency of 5 Hz, showed that it was the non-metallic inclusions which took part in crack initiation resulting from debonding at metal matrix/inclusion interface and pitting of inclusions in both air and corrosove environments, respectively. Short fatigue crack growth results in these two environments obtained by using plastic replication technique, indicated a large effect of microstructure i.e. prior austenite grain boundaries. The stage/stages at which the environmental contribution was dominant has been discussed by considering the results achieved from intermittent tests. However, the mechanisms involved in corrosion fatigue short crack growth have also been described in the light of results obtained from futher investigations carried out by conducting corrosion fatigue tests under applied cathodic potential conditions and tests on hydrogen pre-charged specimens under air fatigue and uniaxial tension conditions.     

Cutoff frequencies and noise power law model of spectral density:adaptation of the multivariance method for irregularly spaced timingdata using the lowest-mode estimator approach

The concept of structure functions, which is an extension of the variance approach, is useful to determine the variance (the structure function) which is optimized for a type of noise and for an order of drift. The multivariance method was developed to use different variances over the same signal. It is then possible to select a set of variances in which each variance is optimized to the determination of one parameter (of one noise level, drift, or cutoff frequency). Recently, we adapted this method to irregularly spaced timing data. In this connection, we replaced the structure functions by another method of spectral density estimation: the lowest-mode estimator, introduced by J.E. Deeter and P.E. Boynton (1982, 1984) for the analysis of pulsar timing data. Different lowest-mode estimators can be constructed according to two priorities: the order of drifts that must be removed and the type of noise for which the sensitivity must be maximum. Thus, a multivariance system is developed using a set of different estimators. The details of this method are described, and the results for different signals are discussed in this paper     

Some factors affecting the electrical properties of carbon-black-loaded butyl rubber during vulcanization

Butyl rubber mixtures loaded with 70 phr general purpose furnace black (GPF) and tetramethyl thiuram disulphide (TMTD)/S as vulcanizing system were prepared. The kinetics of their electrical conductivity development during the vulcanization process were followed by using an especially devised system. It was found that the increase in the electrical conductivity during vulcanization obeys an exponential growth function with time constant τ, which markedly decreases with increasing vulcanization temperature as well as with the efficiency of the vulcanizing system. After completion of the vulcanization process, about 80 min, the samples obtained possess reasonable stability and reproducibility of electrical conductivity.     

A chemical method for preparation of cobalt oxide thin films

A very simple method has been developed for the preparation of cobalt oxides, CoO(OH) and Co₃O₄, thin films on glass substrates using cobalt(II) chloride and ammonia as reacting agents. These materials were characterized by optical and electrical measurements. CoO(OH) films are insulating and have DC dielectric breakdown at about 3700 V / mm when measurements are made using silver print electrodes placed at various spacings on the film. Electrical resistivity of Co₃O₄ is 2.5 ω m. Analysis of the absorption spectra shows that CoO(OH) and CO₃O₄ have optical band gaps of 2.36 eV and 1.65 eV respectively. Spectral variation of the optical constants of these materials have also been measured.     

Subspace-based signal analysis using singular value decomposition

A unified approach is presented to the related problems of recovering signal parameters from noisy observations and identifying linear system model parameters from observed input/output signals, both using singular value decomposition (SVD) techniques. Both known and new SVD-based identification methods are classified in a subspace-oriented scheme. The SVD of a matrix constructed from the observed signal data provides the key step in a robust discrimination between desired signals and disturbing signals in terms of signal and noise subspaces. The methods that are presented are distinguished by the way in which the subspaces are determined and how the signal or system model parameters are extracted from these subspaces. Typical examples, such as the direction-of-arrival problem and system identification from input/output measurements, are elaborated upon, and some extensions to time-varying systems are given