Silver halide-containing photochromic powders of SiO2 sol–gel glass

In order to develop a photochromic powder, an SiO2-gel based on tetraethoxysilane (TEOS) was doped with AgNO3 or AgNO2. The dried gel pieces were pulverized and treated with aqueous or ethanolic halide solutions for growing silver halide microcrystals. Both the introduction of cuprous compounds such as CuBr, CuCl, Cu2O, Cu(CH3COO)2·H2O or sulphur-containing compounds and the formation of AgBrxCl1-x crystals lead to variations of photochromic properties. X-ray diffraction measurements indicate that the average diameters of silver halide microcrystals are limited to 70–110nm. Ultraviolet–visible spectroscopic investigations show the reversibility of the darkening/fading process. Cu+-containing samples exhibit a remarkable fading even at room temperature.     

Effect of dynamic strain ageing on the tensile properties of a modified 9Cr–1Mo steel

Tensile testing of a modified 9Cr–1Mo steel in two microstructural conditions (710T– normalized at 1100°C, tempered at 710°C, and 550T – normalized at 1100°C tempered at 550°C) in the temperature range 25–450°C, under strain rates of 2.3×10-5–2.3×10-3s-1, exhibited serrated flow curves, with serrations appearing almost at the onset of deformation and disappearing before ultimate strengths were attained. The serrated flow curves (characteristics of dynamic strain ageing) were accompanied by increased ultimate strengths, loss of ductility and negative strain-rate sensitivity, relative to the ambient temperature properties. However, the increase in ultimate strength and the reduction in ductility were much larger for 710T specimens, as compared to 550T ones. In the dynamic strain ageing regime, the work-hardenability of 710T specimens increased rapidly while that of 550T specimens remained practically unaffected. Based on the microstructural consideration and the observed activation energy of 45 kJ mol-1, it is proposed that serrations are initiated by a nitrogen atmosphere formation on the waiting dislocations by a pipe diffusion mechanism, and they disappear by diffusion to the precipitate sinks during deformation. Because the fine alloy carbide precipitates in 550T specimens are more effective sinks than those of 710T ones, they can cause much faster depletion of the atmosphere, resulting in a much smaller effect of dynamic strain ageing on the tensile properties of 550T specimens.     

The residential gateway

Burgeoning competition in telecommunications is multiplying the number of communications paths into the home-but a standard multinetwork connection could sort them out. Services going into the residence may enter over copper wires, hybrid fiber coax, RF transmission, fiber to the curb, or, most importantly, by any combination of these sources and structures. To have a successful market, residential customers must be able to move smoothly from one combination of these offerings to another so that the customers consider the move worthwhile. For this multinetwork-to-multiservice interconnection to have value, it must be simple, and that simplicity is the basis for the residential gateway concept. In other words, the substantial complexity of the interconnection must be hidden from the consumer. The concept is essentially the development of a set of interface standards between the broadband residential access networks and the communication services (the internal networks) required for the consumer's home     

Mathematical foundations for error estimation in numericalsolutions of integral equations in electromagnetics

The problem of error estimation in the numerical solution of integral equations that arise in electromagnetics is addressed. The direct method (Green's theorem or field approach) and the indirect method (layer ansatz or source approach) lead to well-known integral equations both of the first kind [electric field integral equations (EFIE)] and the second kind [magnetic field integral equations (MFIE)]. These equations are analyzed systematically in terms of the mapping properties of the integral operators. It is shown how the assumption that field quantities have finite energy leads naturally to describing the mapping properties in appropriate Sobolev spaces. These function spaces are demystified through simple examples which also are used to demonstrate the importance of knowing in which space the given data lives and in which space the solution should be sought. It is further shown how the method of moments (or Galerkin method) is formulated in these function spaces and how residual error can be used to estimate actual error in these spaces. The condition number of all of the impedance matrices that result from discretizing the integral equations, including first kind equations, is shown to be bounded when the elements are computed appropriately. Finally, the consequences of carrying out all computations in the space of square integrable functions, a particularly friendly Sobolev space, are explained     

Bias and temperature dependence of homogeneous hot-electroninjection from silicon into silicon dioxide at low voltages

In this paper, new homogeneous hot-electron injection data at 300 K and 77 K is provided covering applied voltages from well below to well above the Si-SiO₂ barrier height, and a wide range of oxide fields. We found that, in contrast to the MOSFET case, homogeneous injection shows two different regimes for accelerating voltages below and above the barrier height. A simple interpretation of the data is proposed, and supported by Monte Carlo (MC) simulations of the injection experiment. Essentially, the two regimes are the signature of a marked transition between an electron population mostly heated by the electric field, and a tail population created by additional but less efficient energy gain mechanisms, leading to a sharp transition in the carrier distribution function. The details of the bias and temperature dependence of injection are then interpreted as the combined effect of tunneling and carrier distribution. Furthermore, possible implications on MOSFET gate currents are briefly discussed     

A fast spatial-domain method for the suppression ofexcitation-induced spurious modes in SCN TLM

An efficient method for the suppression of excitation-induced spurious modes in the symmetrical condensed node (SCN) transmission-line matrix (TLM) method is presented for the general case of dielectric, anisotropic, or lossy media in planar structures. A special mapping of the field-excitation onto the wave amplitudes of the TLM algorithm completely prevents the emanation of the spurious modes. The application of the mapping in the k-ω space can be done for waveguides with low computational effort. The method is generalized for planar structures with high spatial frequencies of the field at the discontinuities. We use precomputed field templates at the entrance of the three-dimensional (3-D) structures. The mapping is mainly done in the space domain based on the quasi-TEM propagation of the guided waves to keep the computational effort low. Instead of the four-dimensional (4-D) k-ω transformation, only independent one-dimensional (1-D) transformations to the wave coefficient of the conductors direction and ω are necessary. In the case of propagation with low dispersion, the expenditure can be further reduced to 1-D transformations with respect to ω. The efficiency of the present method is demonstrated by investigation of a coplanar waveguide and a triplate waveguide     

Determination of a new podophyllotoxin derivative, TOP-53, and its metabolite in rat plasma and urine by high-performance liquid chromatography with electrochemical detection

A high-performance liquid chromatographic method was developed for the determination of a new podophyllotoxin derivative, TOP-53 (I), and TOP-53 glucuronide (II) as its major metabolite in rat plasma and urine. For the analysis of I, the sample was chromatographed on a reversed-phase C18 column with electrochemical detection after consecutive two-step liquid-liquid extractions. Compound II was determined as I after enzymatic hydrolysis of II. This method was validated sufficiently with respect to specificity, accuracy, and precision. The limits of quantitation for both I and II were 2 ng/ml in plasma and 10 ng/ml in urine. The method is thus useful for the pharmacokinetic study of I.     

Hypercoagulability and chronic atrial fibrillation: the role of markers of thrombin generation

BACKGROUND: We have studied 64 patients with congestive heart failure, half of them also with chronic nonvalvular atrial fibrillation (AF). Patients were also stratified according to a history of prior stroke. METHODS: The generation of thrombin was investigated by means of the molecular markers prothrombin fragment 1 + 2 (F1 + 2) and thrombin-antithrombin III complex (TAT), because AF patients may have a hypercoagulable state. There was only a trend toward higher values of TAT and F1 + 2 for AF patients, while subjects with previous stroke (irrespective of AF) had increased levels of the markers of thrombin generation (TAT stroke+ 18.95 +/- 5.15 vs TAT stroke- 8.34 +/- 2.41; F1 + 2 stroke+ 2.22 +/- 0.29 vs F1 + 2 stroke- 1.32 +/- 0.12). The presence of spontaneous echo contrast (SEC) within left atrium was also investigated in 32 AF patients by transesophageal echocardiography. RESULTS: TAT were significantly higher in subjects (n = 11) with SEC (TAT sec+ 37.5 +/- 13.41 vs TAT sec- 8.7 +/- 2.51, p = 0.008). CONCLUSIONS: Finally, when we grouped into 1) those with both AF and stroke, 2) AF alone, 3) stroke alone and 4) sinus rhythm without stroke, levels of F1 + 2 were higher (and marginally higher TAT) in patients with AF and stroke than in those without stroke, revealing that there is a true clotting activation state in these subjects.