Central place theory and intercommunity input-output analysis

This paper explores trade hierarchies and interindustry relationships, first in theory, then in the empirical context of a western United States timber economy facing a large reduction in its timber harvest. Principles of central place theory guide construction of a hybrid intercommunity input-output model. A nonsurvey technique for estimating central place trade is developed, and is compared with MRIO methods. The effect of central place dominance on intercommunity multipliers is examined theoretically, as is the nature of feedback linkages in a central place hierarchy. The empirical magnitude of feedback effects is small, and although effects vary in magnitude from community to community, neglect of central place considerations can understate intercommunity sawmill multipliers by as much as 36 percent.     

Wind turbine drives — Test results from the ‘falcon’

A wind turbine drive has been designed and built for full scale trials in order to assess the use of this type of propulsion for commercial craft. This wind turbine rig is fitted to the 5.6m long Blackwater sloop ‘Falcon’.

Test results from this boat are presented over a range of operating wind conditions up to Beaufort force 6 (11.5m/s) for two different wind turbine rotors. Maximum boatspeeds reached were 3.5 knots upwind (in 7.2m/s wind), 5.0 knots across the wind (9.8m/s wind) and 5.2 knots downwind (8m/s wind). The ‘hull speed’ of this boat is around 5.0 knots.     

Treatment of poultry manure wastewater using a rotating biological contactor

A pilot scale, six stage rotating biological contactor was used to evaluate the feasibility of this process for the stabilization of liquid animal manures. Total disc surface area was approx. 16.7 m². Treatment efficiencies were determined at various waste strengths and influent flow rates.With loading rates of 14.7–322 g m⁻² day⁻¹, the average COD reduction was 61%. With loading rates of 4.88-24.4 g m⁻² day⁻¹, the average BOD₅ reduction was 87%. Total nitrogen removal averaged approximately 30% for the entire study. Mixed liquor oxygen uptake rates were generally in excess of 80 mg 1⁻¹ h⁻¹.Clarified effluent was non-odorous and suitable to be reused for manure flushing or spray irrigation. Treatment was not sufficient to permit effluent discharge to surface waters.     

Assessment of environmental tobacco smoke exposure: urinary cotinine concentrations in children are strongly associated with the house dust concentrations of nicotine at home

In the present study the possibility of using nicotine in house dust as an index of environmental tobacco smoke (ETS) exposure was evaluated in an environmental investigation of 23 children with asthma. A standardized procedure for house dust sampling of nicotine with a filter holder connected to a vacuum cleaner, for a defined time and area was developed (F-nicotine). Also, house dust sampling was carried out from the vacuum cleaner bags of the homes (VC-nicotine). There was a larger variation in VC-nicotine (13-655, median 66 microg/g) compared with F-nicotine (15-393 median 156 microg/g). There were statistically significant associations between an inquiry data based ETS exposure index on the one hand, and urinary cotinine concentrations in children (U-cotinine), F-nicotine and VC-nicotine of their homes, on the other. The strong correlation between U-cotinine and F-nicotine (rs = 0.93; P < 0.0001) indicates that the new standardized house dust sampling method should be useful in ETS exposure assessment. However, further validation by a larger sample size with repeated measurements in the same homes is needed.     

Dissolution of copper, tin, and iron from sintered tungsten-bronze spheres in a simulated avian gizzard, and an assessment of their potential toxicity to birds

The rates of dissolution of copper, tin, and iron from sintered tungsten-bronze spheres (51.1%W, 44.4%Cu, 3.9%Sn, 0.6%Fe, by mass) were measured in an in vitro simulated avian gizzard at pH 2.0, and 42C. Most of the spheres had disintegrated completely to a fine powder by day 14. Dissolution of copper, tin, and iron from the spheres was linear over time; all r>0.974; all P<0.001. The mean rate of release of copper, tin, and iron was 30.4 mg, 2.74 mg, and 0.38 mg per g tungsten-bronze per day, respectively. These rates of metal release were compared to those in published studies to determine whether the simultaneous ingestion of eight spheres of 3.48 mm diameter would pose a toxic risk to birds. The potential absorption rates of iron and tin (0.54 mg Fe/day, and 3.89 mg Sn/day) from eight tungsten-bronze spheres of total mass 1.42 g would not prove toxic, based on empirical studies of tin and iron ingestion in waterfowl. The release of 43.17 mg copper/day from eight tungsten-bronze spheres, while exceeding the daily copper requirements of domesticated birds, is far below the levels of copper known to cause copper toxicosis in birds. We conclude that sintered tungsten-bronze material made into gunshot, fishing weights, or wheel balance weights, would not pose a toxic risk to wild birds when ingested.     

Organochlorine insecticides and PCB'S in sediments of Lake St. Claire (1970 and 1974) and Lake Erie (1971).

Sediments were collected on a grid from Lake St. Clair in 1970 and 1974 and from Lake Erie in 1971 and analysed for organochlorine insecticides and PCBs. Suspended solids were centrifuged from pumped water in the Detroit River in 1974. Residues of DDE, TDE and DDT were highest in sediment from the Western Basin (70.3 ppb) Lake Erie and lowest in sediment from Lake St. Clair (6.6 ppb in 1970 and 2.6 ppb in 1974). The Central and Eastern Basins of Lake Erie contained residues that fell about mid-way between these means. TDE was the predominant component of ΣDDT and was followed by DDE at approximately half this residue. While DDT represented the lowest component in lake sediments, it was the highest component in suspended solids from the Detroit River.HEOD was present in the entire lake system but at only a fraction of the level of ΣDDT. The mean residue in Lake St. Clair was only 0.1 ppb while Lake Erie sediments contained 1–2 ppb. The highest mean residue (3.6 ppb) was in suspended solids in the Detroit River. Other organochlorine insecticides were only occasionally identified.PCB residues in sediment were approximately 3 times higher than the total organochlorine insecticide residue, being highest in the Western Basin (252 ppb) and lowest in Lake St. Clair (19 ppb in 1970 and 10 ppb in 1974). The Detroit River and Central and Eastern Basins of Lake Erie had intermediate residues.Residues in Lake St. Clair indicated a decline in ΣDDT, HEOD, and PCB residues between 1970 and 1974, and this coincided with the restrictions on the materials. A core sample from the Western Basin of Lake Erie indicated that ΣDDT, HEOD and PCB began to accumulate in sediments in 1958, 1953, and 1956, respectively. This appeared to indicate a lag period of 2–5 years after wide-spread use occurred.     

Biodegradation of urea in river waters under controlled laboratory conditions

The biodegradation of urea in river waters has been evaluated under laboratory conditions. Urea will degrade to ammonia at a rate depending on the bacterial state of the river water and on the water temperature. Under normal conditions no breakdown may be expected to occur at temperatures below 8°C for 14 days contact. In river waters with a high suspended solids content, simulating extreme winter river conditions, a maximum breakdown of 3–6 per cent daily of the original urea levels was found for temperatures not exceeding 8°C during the first 7 days contact.     

Predictions of nitrate diffusion in sediment using horizontal attenuated total reflection (HATR) by Fourier transform infrared (FTIR) spectrometry

Using a novel and simple method based on horizontal attenuated total reflection (HATR) by Fourier transform infrared (FTIR) spectrometry, the effective diffusion coefficient, De, of nitrate in a contaminated anthropogenic sediment was estimated as 7.34 x 10(-6)cm2 s(-1). This method, which requires as little as 1 mL of sediment sample, was able to measure the De of a chemical species with a reproducibility of +/-3% in about 5h. Based on this De and a pre-determined nitrate reduction rate, the profiles of nitrate concentration in two sediment columns were satisfactorily predicted from a mathematical model. Results showed that the profile in this aged sediment depended mainly on the diffusion of nitrate and, only to a much lesser degree, the rate of nitrate reduction. Measurements in 55 anthropogenic sediment samples collected from five locations and various depths of a contaminated site further showed that the De of nitrate increased linearly with the water content of the sediment, but decreased with the sediment density. The technique demonstrated in this study shall be applicable for the risk assessment of toxic pollutants in contaminated sediments, and for planning the spatial and time intervals of nitrate injection strategy in bioremediation.