Retention of Escherichia coli in municipal sewage by means of planted soil filters in two-stage pilot plant systems.

Different types of constructed wetlands in a pilot-plant system were fed with identical municipal waste water to compare the sanitisation process in two-stage systems. With combinations of a vertical and a horizontal flow filter an E. coli reduction of 5 log10 with an E. coli influent concentration of 10(7) MPN/100 ml was achieved. Using different filter materials in each stage the total performance of the two-stage system was independent from the sequence of these materials. However, using coarser filter material in the first stage makes the filter less prone to clogging and is thus the preferential option with regard to operational reliability.     

Lessons learnt from 15 years of ICA in anaerobic digesters.

Anaerobic digestion plants are highly efficient wastewater treatment processes with inherent energy production. Despite these advantages, many industries are still reluctant to use them because of their instability confronted with changes in operating conditions. There is therefore great potential for application of instrumentation, control and automation (ICA) in the field of anaerobic digestion. This paper will discuss the requirements (in terms of on-line sensors needed, modelling efforts and mathematical complexity) but also the advantages and drawbacks of different control strategies that have been applied to AD high rate processes over the last 15 years.     

Estimation of failure probability from a bivariate normal stress-strength distribution

Probability (P) of equipment failure consequent upon stress exceeding built-in strength has been estimated assuming a bivariate normal stress-strength distribution. The UMVUE of P when parameters other than the means are known has been derived. An alternative estimator based on maximum likelihood estimates has been proposed in the case when all the five parameters are unknown. Asymptotic variances of both these estimators have been worked out. Some relevant numerical computations have also been reported.     

Managing rivers for fisheries and livelihoods: how can we do it better?

The growing attention being given to improving water productivity at the catchment level has given rise to increased interest in the contribution of aquatic ecosystems and in particular fisheries to reducing rural poverty and improving food security. There is growing recognition that these natural resources have an important role to play in pro-poor water management in many of the world's river basins, but that capacity to optimize these benefits is constrained by a lack of appropriate technologies and tools to do so. The present paper provides an overview of the current state of understanding of these issues and identifies a number of challenges to be addressed, namely the need to: (i) build wider understanding of the value of river fisheries; (ii) understand the water requirements for sustaining river fisheries; and (iii) develop governance arrangements that bring fisheries to the decision-making table. It concludes by distilling from recent reviews of river fisheries valuation, environmental flows, and governance, a set of specific directions that need to be taken in order to meet these challenges.     

Nanolayered lightweight flexible shields with multidirectional optical transparency

New nanolayered coatings are designed and deposited on flexible plastic substrate having the thickness of 100 /spl mu/m, in order to realize lightweight ultrathin transparent shielding foils. The structure of the coating is optimized considering three figures of merit: the average transmittance in the visible range for normal incidence, the normalized average transmittance for oblique incidence at 550 nm, and the transmittance quality factor. The nanotechnology exploited for the deposition of the transparent metals is the dual ion beam sputtering. Tests of durability, optical transmission, and shielding effectiveness demonstrate that the film has a high adhesion under mechanical solicitation, high resistance against aging, peak transmittance in the visible range higher than 70%, omnidirectional properties in the range 0/spl deg/-60/spl deg/, and shielding effectiveness of 40 dB up to 6 GHz.     

Minimizing power dissipation in optical interconnects at low voltage using optimal modulator design

A strong motivation for insertion of optical interconnects in short-distance applications such as chip-to-chip or back-plane communication, apart from high bit rates, is their potential to achieve these bit rates at low power compared to the currently prevalent copper based interconnects. Thus, it is imperative to construct design methodologies which minimize the total optical link power dissipation. We present one such methodology, where we optimize the quantum-well modulators to minimize the power dissipation in modulator-based optical interconnects. In the first part of the paper, the focus is on obtaining the optimal modulator metrics [contrast ration (CR) and insertion loss], which yield the lowest total power (receiver and the modulator). The trends are studied as a function of the input laser power and bit rate. Having obtained the desirable modulator metrics and the corresponding power dissipation, in the second part, the focus is on the feasibility of these metrics in the light of voltage swing constraints. The biggest concern with the modulator based optical link is the low CR, especially at low voltage swing. While studying these concerns, we also provide insight into the physical design of the modulator including, its intrinsic region thickness, pre-bias voltage, and the size and the number of quantum-wells. Specifically, we outline the method to obtain the design parameters, which allows minimum power dissipation with the least laser power. This ultimately yields higher aggregate I/O bandwidth for chip to chip communication in power limited chips.     

Investigation of the source/drain asymmetric effects due to gate misalignment in planar double-gate MOSFETs

A planar double-gate SOI MOSFET (DG-SOI) with thin channel and thick source/drain (S/D) was successfully fabricated. Using both experimental data and simulation results, the S/D asymmetric effect induced by gate misalignment was studied. For a misaligned DG-SOI, there is gate nonoverlapped region on one side and extra gate overlapped region on the other side. The nonoverlapped region introduces extra series resistance and weakly controlled channel, while the extra overlapped region introduces additional overlap capacitance and gate leakage current. We compared two cases: bottom gate shift to source side (DG/spl I.bar/S) and bottom gate shift to drain side (DG/spl I.bar/D). At the same gate misalignment value, DG/spl I.bar/S resulted in a larger drain-induced barrier lowering effect and smaller overlap capacitance at drain side than DG/spl I.bar/D. Because of reduced drain-side capacitance, the speed of three-stage ring oscillator of DG/spl I.bar/S, with 20% gate misalignment length (L/sub mis/) over gate length (L/sub g/), or L/sub mis//L/sub g/=20%, was faster than that of two-gate aligned DG-SOI.     

The U.S. role in global internet governance

Who should control the Internet? A dozen years after the Internet became a mass medium, this issue has continued to grow in urgency, becoming white hot in fall 2005. At the September 2005 preparatory meeting for the UN World Summit on the Information Society (WSIS), a coalition of countries criticized the United States' unilateral control of the Internet's domain name system (DNS) and proposed the establishment of a multinational Council to supervise it. This proposal emerged from the Final Report of the UN Working Group on Internet Governance. Researchers from the Internet Governance Project, a university-based consortium for policy analysis, have concluded that the United States should internationalize governance of the Internet, but in a way that avoids intrusive, centralized control.