Towards an integrated neonatal brain and cardiac examination capability at 7 T: electromagnetic field simulations and early phantom experiments using an 8-channel dipole array

Objective

Neonatal brain and cardiac imaging would benefit from the increased signal-to-noise ratio levels at 7 T compared to lower field. Optimal performance might be achieved using purpose designed RF coil arrays. In this study, we introduce an 8-channel dipole array and investigate, using simulations, its RF performances for neonatal applications at 7 T.

Methods

The 8-channel dipole array was designed and evaluated for neonatal brain/cardiac configurations in terms of SAR efficiency (ratio between transmit-field and maximum specific-absorption-rate level) using adjusted dielectric properties for neonate. A birdcage coil operating in circularly polarized mode was simulated for comparison. Validation of the simulation model was performed on phantom for the coil array.

Results

The 8-channel dipole array demonstrated up to 46% higher SAR efficiency levels compared to the birdcage coil in neonatal configurations, as the specific-absorption-rate levels were alleviated. An averaged normalized root-mean-square-error of 6.7% was found between measured and simulated transmit field maps on phantom.

Conclusion

The 8-channel dipole array design integrated for neonatal brain and cardiac MR was successfully demonstrated, in simulation with coverage of the baby and increased SAR efficiency levels compared to the birdcage. We conclude that the 8Tx-dipole array promises safe operating procedures for MR imaging of neonatal brain and heart at 7 T.

     

Electromechanical properties of ternary BiFeO<Subscript>3</Subscript>−0.35BaTiO<Subscript>3</Subscript>–BiGaO<Subscript>3</Subscript> piezoelectric ceramics

In the present work, composition dependent crystal structure, ferroelectric, piezoelectric, and temperature dependent dielectric properties of the BiGaO₃-modified (1–x)(0.65Bi_1.05FeO₃–0.35BaTiO₃) (BFBT35–xBG, where x?=?0.00–0.03) lead-free ceramics were systematically investigated by solid-state reaction method, followed by water quenching process. The substitution of BG successfully diffuses into the lattice of the BFBT ceramics, without changing the pseudo-cubic structure of the samples. The scanning electron microscopy (SEM) results revealed that the average grain size was increased with BG-content in BFBT system. The BFBT–xBG ceramics showed a maximum in permittivity (?_max) at temperatures (T_max) above 500 °C in the compositional range of 0.00?≤?x?≤?0.03. The electro-strain is measured to be 0.125% (d^*₃₃ ~ 250 pm/V) under unipolar fields (5 kV/mm) for BFBT–0.01BG ceramics. The same composition (x?=?0.01), large static piezoelectric constant (d₃₃ ~ 165 pC/N) and electromechanical coupling factor (k_p ~ 25%) were obtained. The above investigated characterizations suggests that BFBT–BG material is favorable for piezoelectric and high temperature applications.     

Evolution of ferroelectric and piezoelectric response by heat treatment in pseudocubic BiFeO<Subscript>3</Subscript>–BaTiO<Subscript>3</Subscript> ceramics

Heat treatment of ceramics is an important process to tailor the fine electromechanical properties. To explore the criteria for optimized heat treatment in a perovskite structure of (1–x)Bi_1.05FeO₃–xBaTiO₃ (BF–BT100x) system, the structural phase relation, ferroelectric and piezoelectric response of BF–BT36 and BF–BT40 ceramics prepared by furnace cooling (FC) and quenching process were investigated. The X-ray diffraction examination showed single pseudocubic perovskite structure for all the ceramics. The homogenous microstructure was obtained for all ceramics with relatively large grain size in the furnace cooled samples. Well saturated ferroelectric hysteresis loops and enhanced piezoelectric constant (d₃₃?=?97 pC/N) were achieved by quenching process. Dielectric curve of BF–BT36 showed large dielectric constant at its Curie temperature, however, BF–BT40 showed diffused relaxor-like dielectric anomalies. Quenched BF–BT36 samples showed typical butterfly like field induced strain curves, however negative strain decreased in BF–BT40 ceramics. From these investigated study, it is observed that BF–BT ceramics are very sensitive to the heat treatment process (furnace cooling and quenching) on the dielectric, electromechanical properties.     

Cu-K/Al2O3 based catalysts for conversion of carbon dioxide to methane and carbon monoxide

Abstract

A series of Cu-K/Al₂O₃ catalysts were synthesized by wet impregnation technique. The reduced catalysts were further used for conversion of carbon dioxide to methane and carbon monoxide. Moreover, the fresh and used catalysts were characterized to investigate the changes in the surface morphology, metal dispersion, surface area, crystalline phases, and functional groups of studied catalysts. The SEM analysis of fresh and spent catalysts showed no remarkable difference in surface morphology with irregular shaped agglomerated particles. Furthermore, TEM micrographs presented the well distribution of metal catalyst over alumina support. The decrease in surface area from 115 to 77?m²/g for Cu_1.62-K_0.5/Al₂O₃ after reaction was related to sintering and oxidation of catalyst during reaction. XRD revealed the disappearance of some minor peaks which can be associated with the sintering of spent catalyst. FTIR also presented some new peak for spent catalyst which can be linked with metal oxides. Moreover, various reaction conditions of temperature (230, 400, and 600?°C), pressure (1 and 7?bar), and feed molar ratio of H₂/CO₂ (2:1 and 4:1) were investigated using different Cu loading (0, 1, 1.25, 1.62, and 4 weight percent). A maximum CO₂ conversion of 63% with 39% CH₄ selectivity was achieved by using Cu_1.62-K_0.5/Al₂O₃ at 600?°C, molar ratio of H₂/CO₂ 4 under 7?bar. The presence of K on the surface of synthesized catalyst increased the CO₂ conversion from 48% (Cu₁/Al₂O₃) to 55% (Cu₁-K_0.5/Al₂O₃) at above mentioned reaction conditions which suggested the promoter effect of K during conversion of carbon dioxide.     

Thermal-stability of electric field-induced strain and energy storage density in Nb-doped BNKT-ST piezoceramics

In this work, the relationship between the structural mechanisms and macroscopic electrical properties of the Nb-modified 0.96(Bi_0.5Na_0.84K_0.16TiO₃)–0.04SrTiO₃ (BNKT–ST) system were elucidated by using temperature dependent and in situ synchrotron X-ray diffraction (XRD) techniques. For the composition x?=?0.0175, a large-signal piezoelectric coefficient (S_max/E_max?=?d₃₃*) of 735 pm?V^?1 at 6?kV mm^?1 was observed at room temperature. Interestingly, at a higher temperature of 110?°C, the sample still showed a large d₃₃* of 570 pm V^?1. Furthermore, the temperature-invariant electrostrictive coefficient for this sample was found to be 0.0285?m⁴?C^?2 over the temperature range of 25–170?°C. Moreover, the energy density for x?=?0.030 sample was ～1.0?J?cm^?3 with an energy storage efficiency of ?70% in the temperature range of 25–135?°C. These results suggest that the synthesized Nb-modified BNKT–ST system is promising for the design of ceramic actuators as well as capacitor applications.     

An Investigation into the Inactivation Kinetics of Hydrogen Peroxide Vapor Against Clostridium difficile Endospores

C. difficile spores are resistant to routine cleaning agents and are able to survive on inanimate surfaces for long periods of time. There is increasing evidence of the importance of the clinical environment as a reservoir for pathogenic agents and as a potential source of healthcare-associated infections (HCAIs). In this context, to reduce the risk of cross-transmission, terminal disinfection of hospital wards and isolation rooms using hydrogen peroxide vapor (HPV) is attracting attention. Spores of C. difficile (ribotype 027) were exposed to constant concentrations of HPV ranging between 11 and 92 mg m^?3 (ppm) for a range of exposure times in a specially designed chamber. The inactivation data thus obtained was fitted using the modified Chick–Watson inactivation model to obtain decimal reduction values (D values). D values ranged from 23 to 1.3 min at HPV concentrations of 11 and 92 ppm, respectively. We present a simple mathematical model based on the inactivation kinetic data obtained here to estimate the efficacy of commercial HPV processes used in healthcare environmental decontamination. C. difficile spores showed linear inactivation kinetics at steady HPV concentrations ranging between 10 and 90 ppm. The data obtained here was used to provide estimates of the inactivation efficacy of commercial HPV process cycles, which employ unsteady HPV concentrations during the decontamination process.     

Interaction of cetyltrimethylammonium bromide with drug in aqueous/ electrolyte solution: A combined conductometric and molecular dynamics method study

Interaction between beta-lactum antibiotic drug ciprofloxacin hydrochloride(CFH)and cationic surfactant cetyltrimethylammonium bromide(CTAB)was performed conductometrically in aqueous as well as in the occurrence of different salts(NaCl,KCl as well as NH_4Cl)over the temperature range of 298.15–323.15 K at the regular interval of 5 K.CFH drug has been suggested for the treatment of bacterial infections such as urinary tract infections and acute sinusitis.A clear critical micelle concentration(CMC)was obtained for pure CTAB as well as(CFH+CTAB)mixed systems.The decrease in CMC values of CTAB caused by the addition of CFH reveals the existence of the interaction between the components and therefore it is the indication of micelle formation at lower concentration of CTAB and their CMC values further decrease in attendance of salts.A nonlinear behavior in the CMC versus T plot was observed in all the cases.The ΔG_m~0 values are found to be negative in present study systems demonstrated the stability of the solution.The values of ΔH_m~0 and ΔS_m~0 reveal the existence of hydrophobic and electrostatic interactions between CFH and CTAB.The thermodynamic properties of transfer for the micellization were also evaluated and discussed in detail.Molecular dynamic simulation disclosed that environment of water and salts have impact on the hydrophobic interaction between CFH and CTAB.In water and salts,CTAB adopts spherical micelle in which charged hydrophilic groups are interacted with waters whereas hydrophobic tails form the core of the micelle.This hydrophobic core region is highly conserved and protected.In addition,micelle formation is more favorable in aqueous Na Cl solution than other solutions.     

Effect of Ozone Pretreatment on Biodegradability Enhancement and Biogas Generation Potential From Biomethanated Distillery Effluent

The study evaluates the effect of ozone pretreatment on biodegradability enhancement of biomethanated distillery effluent. Results revealed that ozone pretreatment led to biodegradability index (BI = BOD/COD) enhancement up to 0.58 along with COD, color and toxicity reduction of up to 33%, 25% and 40%, respectively. Anaerobic digestion of pretreated effluent resulted in favorable biogas generation with methane content, yield and COD reduction of up to 62%, 39 mL/g COD and 57%, respectively. Kinetics of biogas generation determined by modified Gompertz model indicated methane production potential and production rate of 48.08 mL/g COD and 8.085 mL/g COD.day respectively under optimal conditions.     

N‐halamine‐modified polyglycolide (PGA) multifilament as a potential bactericidal surgical suture: In vitro study

In this study, new cationic homopolymer and anionic copolymer were synthesized, and deposited onto polyglycolide sutures using a layer‐by‐layer assembly technique. The coated sutures were rendered antibacterial by chlorinating with dilute solution of household bleach solution at pH 7. The chlorination treatment transformed the N? H groups of anionic copolymer into N‐halamine structures. The N‐halamine‐modified sutures were challenged with Staphylococcus aureus and Escherichia coli O157:H7 bacteria at different contact times. The suture with chlorine loading of 0.22% completely inactivated both bacterial strains in 30 min contact time. Fourier transform infrared spectroscopy, scanning electron microscopy, and analytical titration confirmed the successful deposition of the N‐halamine multilayers. The effect of layer‐by‐layer coatings of polyelectrolytes on the chlorine loading and antibacterial efficacy of sutures was evaluated. The straight‐pull and knot‐pull strength tests performed on the sutures reported slight decline in tensile properties after chlorination treatment. The in vitro hemolysis and cytocompatibility tests revealed that the N‐halamines‐based antibacterial sutures were biocompatible. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42483.     

Development of Polyoxyethylene Zwitterionic Surfactants for High-Salinity High-Temperature Reservoirs

Substantial efforts are underway to improve the recovery factor from existing oil reserves to meet the ever-growing global oil demand. Surfactants are known to increase oil recovery through reducing interfacial tension (IFT) and/or altering the rock wettability. The selection of surfactants for high-salinity high-temperature oil fields is a challenging task owing to poor thermal stability, precipitation, and adsorption of surfactants on reservoir rocks. Sulfobetaine-based polyoxyethylene zwitterionic surfactants have shown excellent thermal and surface properties. However, their solubility in high-salinity brines becomes poor particularly with a long hydrophobic tail (>C17). Recently, we synthesized such types of surfactants by incorporating ethylene oxide (EO) units into the hydrophobic tail, which improved the solubility in formation water (213,734 ppm) and seawater (SW) (57,643 ppm). In this work, we investigated the IFT, thermal stability, rheological behavior, and foaming properties of two polyoxyethylene zwitterionic surfactants having different degrees of ethoxylation. Aging experiments exhibited excellent thermal stability and no change in the chemical structure was detected. The surfactant with lesser EO units (EASB-1a) showed a lower IFT compared to the surfactant with higher EO units (EASB-1b). Rheological studies revealed that the addition of both surfactants reduced the viscosity of the acrylamide copolymer. However, the effect of EASB-1a was more prominent compared to that of EASB-1b. The surfactant with a higher degree of ethoxylation showed lower adsorption compared to the surfactant with a lesser degree of ethoxylation. Both surfactants showed excellent foamability and foam stability compared to the commercial surfactants. Excellent thermal stability, water solubility under harsh reservoir conditions, foaming properties, and lower adsorption make them a suitable choice for high-temperature, high-salinity reservoirs.