The activation of fibroblast growth factors (FGFs) by glycosaminoglycans: influence of the sulfation pattern on the biological activity of FGF-1

Six synthetic heparin-like oligosaccharides have been used to investigate the effect of the oligosaccharide sulfation pattern on the stimulation of acidic fibroblast growth factor (FGF-1) induced mitogenesis signaling and the biological significance of FGF-1 trans dimerization in the FGF-1 activation process. It has been found that some molecules with a sulfation pattern that does not contain the internal trisaccharide motif, which has been proposed for high affinity for FGF-1, stimulate FGF-1 more efficiently than those with the structure of the regular region of heparin. In contrast to regular region oligosaccharides, in which the sulfate groups are distributed on both sides of their helical three-dimensional structures, the molecules containing this particular sulfation pattern display the sulfate groups only on one side of the helix. These results and the fact that these oligosaccharides do not promote FGF-1 dimerization according to sedimentation-equilibrium analysis, confirm the importance of negative-charge distribution in the activation process and strongly suggest that FGF dimerization is not a general and absolute requirement for biological activity.     

Enhancements in sugar immobilization in polymeric macroporous matrices for affinity capture

The use of macroporous monolithic matrices in the purification of biocompounds is constantly growing and developing. In this work, the objective was to optimize the quantity of N-acetyl-D-glucosamine (D-GlcNAc) immobilized on the surface of macroporous polymeric cryogels for capture of lectins from less clarified solutions. Surface response methodology was applied and it was observed that the immobilization temperature of the glutaraldehyde (GLU) and the D-GlcNAc concentration influenced the amount of sugar immobilized. The matrices produced with 1.1% of allyl glycidyl ether were functionalized by GLU. Optimal maximum condition was obtained with mean value of 160.39 ± 26.38 mg of D-GlcNAc immobilized per gram of dry cryogel. Characterization analyses of the matrices showed that the activation process was effective, maintaining the macroporous structure and physical characteristics. The adsorbents produced were tested for capture of lectins from a crude protein solution of barley. At tested conditions, adsorbent capture around 11% of protein in solution but reduce the hemaglutinating capacity in 40%, demonstrating its selectivity. The cryogels functionalized with D-GlcNAc present potential for use in capture compounds by affinity with carbohydrates, such as lectins. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47956.     

Anticoagulant, Antioxidant and Antitumor Activities of Heterofucans from the Seaweed Dictyopteris delicatula

In the present study, six families of sulfated polysaccharides were obtained from seaweed Dictyopteris delicatula by proteolytic digestion, followed by acetone fractionation and molecular sieving on Sephadex G-100. Chemical analyses demonstrated that all polysaccharides contain heterofucans composed mainly of fucose, xylose, glucose, galactose, uronic acid, and sulfate. The fucans F0.5v and F0.7v at 1.0 mg/mL showed high ferric chelating activity (～45%), whereas fucans F1.3v (0.5 mg/mL) showed considerable reducing power, about 53.2% of the activity of vitamin C. The fucan F1.5v presented the most prominent anticoagulant activity. The best antiproliferative activity was found with fucans F1.3v and F0.7v. However, F1.3v activity was much higher than F0.7v inhibiting almost 100% of HeLa cell proliferation. These fucans have been selected for further studies on structural characterization as well as in vivo experiments, which are already in progress.     

Gelcasting of alumina-chitosan beads

Several papers have reported the advantageous combination of chitosan and ceramic particles for such applications as biomimetic scaffolds, membranes, pollution remediation and gelcasting complex shapes. This work presents a novel gelcasting consolidation mechanism, based on the effects of pH changes on chitosan solubility and zeta potential of alumina particles. Unlike other chitosan-based gelcasting methods, it employs a small content of organic material (lower than 3 wt%) and does not require crosslinking agents (such as glutaraldehyde). With this new method alumina beads with 0.5-1 mm diameter could be produced, whose porosity and specific surface area could be tuned for various applications.     

Production of nanoparticles from natural hydroxylapatite by laser ablation

Laser ablation of solids in liquids technique has been used to obtain colloidal nanoparticles from biological hydroxylapatite using pulsed as well as a continuous wave (CW) laser. Transmission electron microscopy (TEM) measurements revealed the formation of spherical particles with size distribution ranging from few nanometers to hundred nanometers and irregular submicronic particles. High resolution TEM showed that particles obtained by the use of pulsed laser were crystalline, while those obtained by the use of CW laser were amorphous. The shape and size of particles are consistent with the explosive ejection as formation mechanism.     

High-Stable Mesoporous Ni-Ce/Clay Catalysts for Syngas Production

Abstract  

A mesoporous-type catalytic support was synthesized through the modification of a smectite with polyvinyl alcohol (PVA) and microwaves. Texture and micro-morphology of the support was determined. Several techniques were employed in order to describe the chemical environment of active species on the surface. Ni⁰ particle sizes were dependent on the structural site of reducible species. High stable Ni-Ce catalysts (calcined at 800 °C) were evaluated in the CO₂ reforming of methane reaction at 700 °C (WHSV = 96 L g⁻¹ h⁻¹, without dilution gas and pre-reduction). The catalysts have presented CH₄ conversions between 40 and 65%, CO₂ conversion between 35 and 65% and H₂/CO ratios between 0.2 and 0.4.     

Modeling the kinetics of anionic polymerization in cyclohexane as a non-complexing solvent

In this work it is presented a model of alkyllithium initiated anionic polymerization. The model was developed from the balance of living polymer chains of each chain length, taking into account the participation of molecular aggregates of lithium compounds in initiation and propagation reactions. The model was applied to styrene polymerization in cyclohexane, where the known but not explained acceleration of initiation reaction takes place. The well established reaction order respect to polystyryllithium in propagation reaction allowed some simplification of the model. A more simplified model of three parameters was also developed by using apparent kinetic constants. As part of the work, the apparent propagation constants were determined experimentally and are reported in the Arrhenius equation form. The remainder kinetic parameters used in the model were assumed or fitted to experimental data and are described into the work. The model allows explaining acceleration of the initiation reaction and experimental data of molecular weight averages (M_n, M_w and M_z) during the polymerization. The three-parameter model was only able to explain the acceleration of initiation reaction and monomer conversion data.     

Logit modeling for classification of monocultivar olive oils from southwest Spain: A preliminary study

A characterization study of the main olive oil cultivars of southwest Spain (Picual, Arbequina, and Verdial) has been performed in order to establish logistic regression models. Several quality characteristics (free acidity, peroxide value, K₂₃₂, K₂₇₀, oxidative stability index) and chemical data (fatty acids, sterols, erythrodiol–uvaol composition) were measured. Logit regressions were used to evaluate the correlation of the parameters and to create models that allow saving costs on identifying oils as Arbequina, Picual, or Verdial type. Multiple logit regression models were developed: one for Arbequina, three models for Picual, and two models for Verdial cultivar, allowing in this way to minimize the cost for classifying oil samples. Practical application: The olive oil marketing is increasingly focused on the chemical differentiation and characterization of the product because the chemical composition of these virgin oils is responsible for their valuable sensory and nutritional properties. Here we present a characterization study (quality characteristics and chemical data) from the main olive oil cultivars of southwest Spain, Picual, Arbequina, and Verdial, as a first step for the traceability of these three types of monocultivar virgin olive oils. The results may be used as a training to create models for other olive oil cultivars.     

Rice hull biocomposites,part 2: Effect of the resin composition on the properties of the composite

A free radical thermoset resin consisting of a copolymer of conjugated linseed oil (CLO) or conjugated soybean oil (CSO), n‐butyl methacrylate (BMA), divinylbenzene (DVB), and maleic anhydride (MA) has been reinforced with rice hulls. Composites containing 70 wt % of the filler were compression molded, the conjugated oil content in the resin was kept constant at 50 wt %, and the relative amounts of BMA, DVB, and MA were varied to afford composites with different resin compositions. Tensile tests, DMA, thermogravimetric analysis, and Soxhlet extraction of the different composites prepared have been used to establish the relationship between resin composition and the properties of the composites. Overall, the mechanical properties tend to improve when MA is introduced into the resin. Scanning electron microscopy of selected samples showed a better filler–resin interaction for MA‐containing composites and samples prepared from CLO exhibit better properties than those prepared from CSO. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011