First data from the EGLE experiment onboard the ISS

EGLE is a wide frequency band search- coil magnetometer designed and built at the Roma Tre University. It has been installed onboard the ISS by the Italian astronaut Roberto Vittori on April 25, 2005 within the LAZIO- EGLE experiment carried out during the ENEIDE Soyuz mission. The scope of the experiment is to test EGLE in space and to investigate geomagnetic field variations. The main applications of EGLE are the study of electromagnetic environment inside the ISS, the correlation of magnetic field data with particle fluxes detected by LAZIO particle detector, and the monitoring of ionospheric perturbations possibly caused by Earth seismic activity. Since continuous electromagnetic field measurements on board the ISS are important for diverse space applications, a magnetometer with a suitable design is requested. Appropriate solutions for these applications, which have been adopted by EGLE, are in particular the use of 1- Wire technology and the possibility to detect by means of a search- coil magnetometer a large portion of the ULF frequency band, usually measured by flux- gate probes. To investigate the topside ionosphere electromagnetic environment and stability of Van Allen radiation belts in relation with seismic and anthropogenic electromagnetic emissions, a specific satellite mission (the ESPERIA project) has been designed for the Italian Space Agency (ASI), and up to now a few instruments of its payload have been built and tested in space. One of them is exactly the EGLE search- coil magnetometer. The first magnetic observations performed by this instrument reveal to be promising and demand for a further and deeper analysis based on a longer time series of data.     

Antennas and Propagation for On-Body Communication Systems

On-body communication channels are of increasing interest for a number of applications, such as medical-sensor networks, emergency-service workers, and personal communications. This paper describes investigations into channel characterization and antenna performance at 2.45 GHz. It is shown that significant channel fading occurs during normal activity, due primarily to the dynamic nature of the human body, but also due to multipath around the body and from scattering by the environment. This fading can be mitigated by the use of antenna diversity, and gains of up to 10 dB are obtained. Separation of the antenna's performance from the channel characteristics is difficult, but results show that for many channels, an antenna polarized normal to the body's surface gives the best path gain. Simulation and modeling present many challenges, particularly in terms of the problem's scale, and the need for accurate modeling of the body and its movement.     

Design of an enhanced access point to optimize TCP performance in Wi-Fi hotspot networks

In the last years, the number of Wi-Fi hotspots at public venues has undergone a substantial growth, promoting the WLAN technologies as the ubiquitous solution to provide high-speed wireless connectivity in public areas. However, the adoption of a random access CSMA-based paradigm for the 802.11 MAC protocol makes difficult to ensure high throughput and a fair allocation of radio resources in 802.11-based WLANs. In this paper we evaluate extensively via simulations the interaction between the flow control mechanisms implemented at the TCP layer and the contention avoidance techniques used at the 802.11 MAC layer. We conducted our study considering initially M wireless stations performing downloads from the Internet. From our results, we observed that the TCP downlink throughput is not limited by the collision events, but by the inability of the MAC protocol to assign a higher chance of accessing the channel to the base station. We propose a simple and easy to implement modification of the base station’s behavior with the purpose of increasing the TCP throughput reducing useless MAC protocol overheads. With our scheme, the base station is allowed to transmit periodically bursts of data frames towards the mobile hosts. We design a resource allocation protocol aimed at maximizing the success probability of the uplink transmissions by dynamically adapting the burst length to the collision probability estimated by the base station. By its design, our scheme is also beneficial to achieve a fairer allocation of the channel bandwidth among the downlink and uplink flows, and among TCP and UDP flows. Simulation results confirm both the improvement in the TCP downlink throughput and the reduction of system unfairness.     

Ultrastable Liquid–Liquid Interface as Viable Route for Controlled Deposition of Biodegradable Polymer Nanocapsules

Liquid–liquid interfaces are highly dynamic and characterized by an elevated interfacial tension as compared to solid–liquid interfaces. Therefore, they are gaining an increasing interest as viable templates for ordered assembly of molecules and nanoparticles. However, liquid–liquid interfaces are more difficult to handle compared to solid–liquid interfaces; their intrinsic instability may affect the assembly process, especially in the case of multiple deposition. Indeed, some attempts have been made in the deposition of polymer multilayers at liquid–liquid interfaces, but with limited control over size and stability. This study reports on the preparation of an ultrastable liquid–liquid interface based on an O/W secondary miniemulsion and its possible use as a template for the self‐assembly of polymeric multilayer nanocapsules. Such polymer nanocapsules are made of entirely biodegradable materials, with highly controlled size—well under 200 nm—and multi‐compartment and multifunctional features enriching their field of application in drug delivery, as well as in other bionanotechnology fields.     

A decision support system for optimal deployment of sonobuoy networks based on sea current forecasts and multi-objective evolutionary optimization

A decision support system for the optimal deployment of drifting acoustic sensor networks for cooperative track detection in underwater surveillance applications is proposed and tested on a simulated scenario. The system integrates sea water current forecasts, sensor range models and simple drifting buoy kinematic models to predict sensor positions and temporal network performance. A multi-objective genetic optimization algorithm is used for searching a set of Pareto optimal deployment solutions (i.e. the initial position of drifting sonobuoys of the network) by simultaneously optimizing two quality of service metrics: the temporal mean of the network area coverage and the tracking coverage. The solutions found after optimization, which represent different efficient tradeoffs between the two metrics, can be conveniently evaluated by the mission planner in order to choose the solution with the desired compromise between the two conflicting objectives. Sensitivity analysis through the Unscented Transform is also performed in order to test the robustness of the solutions with respect to network parameters and environmental uncertainty. Results on a simulated scenario making use of real probabilistic sea water current forecasts are provided showing the effectiveness of the proposed approach. Future work is envisioned to make the tool fully operational and ready to use in real scenarios.     

Real-time risk monitoring in business processes: A sensor-based approach

This article proposes an approach for real-time monitoring of risks in executable business process models. The approach considers risks in all phases of the business process management lifecycle, from process design, where risks are defined on top of process models, through to process diagnosis, where risks are detected during process execution. The approach has been realized via a distributed, sensor-based architecture. At design-time, sensors are defined to specify risk conditions which when fulfilled, are a likely indicator of negative process states (faults) to eventuate. Both historical and current process execution data can be used to compose such conditions. At run-time, each sensor independently notifies a sensor manager when a risk is detected. In turn, the sensor manager interacts with the monitoring component of a business process management system to prompt the results to process administrators who may take remedial actions. The proposed architecture has been implemented on top of the YAWL system, and evaluated through performance measurements and usability tests with students. The results show that risk conditions can be computed efficiently and that the approach is perceived as useful by the participants in the tests.     

Potential of diffuse scatterer interferometry for monitoring CO2 storage sites in European contexts (land cover types)

This article proposes to test the feasibility of long-term surface deformation monitoring based on synthetic aperture radar (SAR) interferometry on carbon dioxide (CO₂) storage sites with land cover representative of potential European injection sites (agricultural or forests with minimum built-up land cover). Because no operational injection site is currently active in Europe, a SAR data set (based on EnviSAT–ASAR spaceborne data) is simulated by combining SAR scenes acquired over a potential future European injection site with deformation measurements from SAR analysis carried out on the In-Salah (Algeria) CO₂ injection demonstrator site. The study shows that under such conditions, both persistent scatterer interferometry (PSI) and diffuse scatterer (DS) interferometry appear insufficient to provide a sufficiently dense measurement network to characterize surface deformation correctly. Alternative solutions, to be investigated in further studies, include the use of data archives with shorter acquisition time spans (e.g. Sentinel-1 data when available) or installation of corner reflectors. The cost of the latter mixed space/ground solution must be evaluated with respect to conventional ground-based measurement methods in the proposed context.     

Measurement of water colour using AVIRIS imagery to assess the potential for an operational monitoring capability in the Pamlico Sound Estuary,USA

The monitoring of water colour parameters can provide an important diagnostic tool for the assessment of aquatic ecosystem condition. Remote sensing has long been used to effectively monitor chlorophyll concentrations in open ocean systems; however, operational monitoring in coastal and estuarine areas has been limited because of the inherent complexities of coastal systems, and the coarse spectral and spatial resolutions of available satellite systems. Data were collected using the National Aeronautics and Space Administration (NASA) Advanced Visible–Infrared Imaging Spectrometer (AVIRIS) flown at an altitude of approximately 20 000 m to provide hyperspectral imagery and simulate both MEdium Resolution Imaging Spectrometer (MERIS) and Moderate Resolution Imaging Spectrometer (MODIS) data. AVIRIS data were atmospherically corrected using a radiative transfer modelling approach and analysed using band ratio and linear regression models. Regression analysis was performed with simultaneous field measurements data in the Neuse River Estuary (NRE) and Pamlico Sound on 15 May 2002. Chlorophyll a (Chl a) concentrations were optimally estimated using AVIRIS bands (9.5 nm) centred at 673.6 and 692.7 nm, resulting in a coefficient of determination (R ²) of 0.98. Concentrations of Chromophoric Dissolved Organic Matter (CDOM), Total Suspended Solids (TSS) and Fixed Suspended Solids (FSS) were also estimated, resulting in coefficients of determination of R ² = 0.90, 0.59 and 0.64, respectively. Ratios of AVIRIS bands centred at or near those corresponding to the MERIS and MODIS sensors indicated that relatively good satellite‐based estimates could potentially be derived for water colour constituents at a spatial resolution of 300 and 500 m, respectively.