Temperature-Dependent Re-alignment of the Short Multifunctional Peptide BP100 in Membranes Revealed by Solid-State NMR Spectroscopy and Molecular Dynamics Simulations

BP100 is a cationic undecamer peptide with antimicrobial and cell-penetrating activities. The orientation of this amphiphilic α-helix in lipid bilayers was examined under numerous conditions using solid-state ¹⁹F, ¹⁵N and ²H NMR. At high temperatures in saturated phosphatidylcholine lipids, BP100 lies flat on the membrane surface, as expected. Upon lowering the temperature towards the lipid phase transition, the helix is found to flip into an upright transmembrane orientation. In thin bilayers, this inserted state was stable at low peptide concentration, but thicker membranes required higher peptide concentrations. In the presence of lysolipids, the inserted state prevailed even at high temperature. Molecular dynamics simulations suggest that BP100 monomer insertion can be stabilized by snorkeling lysine side chains. These results demonstrate that even a very short helix like BP100 can span (and thereby penetrate through) a cellular membrane under suitable conditions.     

Synthesis and Characterizations of Melamine-Based Epoxy Resins

A new, easy and cost-effective synthetic procedure for the preparation of thermosetting melamine-based epoxy resins is reported. By this innovative synthetic method, different kinds of resins can be obtained just by mixing the reagents in the presence of a catalyst without solvent and with mild curing conditions. Two types of resins were synthesized using melamine and a glycidyl derivative (resins I) or by adding a silane derivative (resin II). The resins were characterized by means of chemical-physical and thermal techniques. Experimental results show that all the prepared resins have a good thermal stability, but differ for their mechanical properties: resin I exhibits remarkable stiffness with a storage modulus value up to 830 MPa at room temperature, while lower storage moduli were found for resin II, indicating that the presence of silane groups could enhance the flexibility of these materials. The resins show a pot life higher than 30 min, which makes these resins good candidates for practical applications. The functionalization with silane terminations can be exploited in the formulation of hybrid organic-inorganic composite materials.     

The Role of Vitamin D in Sleep Disorders of Children and Adolescents: A Systematic Review

This review investigates the association between vitamin D and sleep disorders. Vitamin D is an essential nutrient known to play an important role in the growth and bone health of the human body, but it also appears to play a role in sleep. The goal of our review is to examine the association between vitamin D and sleep disorders in children and adolescents. We summarize the evidence about the role and the mechanism of action of vitamin D in children and adolescents with sleep disorders such as insomnia, obstructive sleep apnea (OSA), restless legs syndrome (RLS), and other sleep disorders. Systematic electronic database searches were conducted using Pubmed and Cochrane Library. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guideline was followed. The studies that met the established inclusion criteria were analyzed and compared. Results suggest a strict relationship between vitamin D deficiency in children and sleep disorders. There is evidence that vitamin D is implicated in the different neurochemical mechanisms involved in sleep regulation and mainly in the serotonergic and dopaminergic pathways. This might be responsible for the association of vitamin D deficiency and restless sleep, sleep hyperhidrosis, OSA, and RLS.     

Bio-derived sodium silicate for the manufacture of alkali-activated binders: Use of bamboo leaf ash as silicate source

Alkali activated binders are a promising alternative to the use of Portland cement in the manufacture of concrete for curbing CO₂ emissions. Novel sources of silicates have been investigated in recent years for reducing cost and environmental impacts associated with the use of chemical activators. This study describes the production of solid sodium silicate (SS) activating powder from bamboo leaf ash (BLA). Bamboo leaves were calcined at 550–800°C, mixed with NaOH pellets, and heated in an oven at 300°C. The obtained silicate powder was used for activating blended fly ash/slag samples. Mechanical and microstructural properties of BLA-based samples were compared to those of samples made with commercially available chemicals. The strength of BLA-activated mortars matched the commercially-sourced activators, being 25–30 MPa at 7 days and exceeding 40 MPa at 28 days. The microstructural analysis suggested that BLA-based SS showed a lesser degree of dissolution of precursors at 7 days, but the quality of the matrix was higher than that of NaOH-activated samples. These results confirmed that the reactivity of BLA-silicate powder was similar to that of commercial SS solutions, and show the potential valorization of future biomass renewable waste in the production of low carbon, alkali-activated concretes.     

Phase separation and gelation of epoxy resin/hyperbranched polymer blends

The structural buildup during reticulation of thermoset systems containing reactive modifiers can strongly influence the final properties of such blends. This was studied by considering the rheological behavior during cure of an epoxy/amine thermoset system blended with reactive dendritic hyperbranched polymers (HBPs). Depending on the chemical structure of the HBP used in the blend, a phase separation could be observed. The onset and offset of the phase separation process could be detected by observing the evolution of the viscoelastic properties. The phase separation onsets obtained by rheological measurements were compared with the values obtained by traditional cloud point observations. Good agreement between the two techniques was observed. Hyperbranched polymers that did not phase separate during the curing process were used to study gelation phenomena and its dependence on the reactivity and functionality of the HBP. The gelation of the homogeneous blend system using the Flory‐Stockmayer theory was also modeled. This highlighted the influence of both functionality and reactivity of the components, and the appearance of co‐operative polymerization mechanisms in homogeneous blends.     

Activated carbon and metal organic framework as adsorbent for low-pressure methane storage applications: an overview

The aim of this comprehensive review on materials for methane storage application is to understand which are the best conditions and the best materials for their use for the implementation of storage tank. The research was focused on two different families of samples that up to now appear like the most promising. In particular, Activated carbon and metal organic framework were analyzed and an overall picture was extrapolated. Analysis of the structural parameters and adsorption capacities were evaluated and relation between them were obtained. A comparison of values available in literature was done and, when possible, laboratory tests were performed. The presented results allow to identify potential materials with high specific storage capacity and to verify their performances in optimized conditions. This work represents the starting point for a real and efficient method to the methane storage as a starting point for the development of Adsorbed Natural Gas technology for static and/or automotive applications.     

Structure-activity relationship study of 16 a-thiocamptothecins: an integrated in vitro and in silico approach

The instability of the hydroxylactone E ring represents a critical drawback of camptothecins, because the lactone ring is recognized to be essential for stabilization of topoisomerase I‐mediated DNA cleavage. In an attempt to investigate the effect of the thiopyridone pharmacophofore on the molecular and pharmacological features of the drug, we prepared a series of novel 16 a‐thiocamptothecin analogues. Due to the sulfur atom, a destabilization of the hydrogen bond between the hydroxy group in position 17 of the opened E ring and the carbonyl of the pyridone moiety is predicted, thus shifting the equilibrium toward the closed lactone form and increasing the lipophilic properties of the compounds. This feature was associated with superior antiproliferative potency, with reduced interaction with the human serum albumin and with substantial increase of the persistence of the topoisomerase I–DNA cleavable complex. These effects were prominent for thio‐SN38, the most active compound of the series. The favorable interactions at the molecular and cellular level of the reported thiocamptothecins confer promising features, and these compounds warrant preclinical development.