Sustainable conducting polymer composites: study of mechanical and tribological properties of natural fiber reinforced PVA composites with carbon nanofillers

ABSTRACT

Ball milled jute fiber (JF) was added to Polyvinyl Alcohol (PVA)/20 wt.% multi-layer graphene (MLG) composites in various proportions (0, 5, 10, 15 and 20 wt.%) to prepare sustainable and biodegradable conducting polymer composites. Also, PVA/17.5wt.%MLG/2.5wt.%MWCNT/20wt.% JF composite was prepared for comparison purpose. A dynamic mechanical analysis of the composites was conducted to analyze their viscoelastic nature. The electrical conductivity of the composites was measured to study their suitability for various applications. Jute reinforcement increased the electrical conductivity of PVA/MLG nanocomposites. The PVA/20wt.%JF/17.5wt.%MLG/2.5wt.%MWCNT hybrid composite had the highest electrical conductivity of 3.64 × 10^?4 S/cm among all the composites prepared. Multilayered structures of the hybrid composite films were made by hot-pressing, and their effectiveness in electromagnetic interference shielding was tested. The shielding effectiveness of the composites decreased with jute addition. The wear resistance of PVA/MLG/JF composites increased with an increase in the jute content up to an optimum value of 10 wt.%, and then it started deteriorating.     

粉末橡胶

介绍了Adar自主研制的Aparene NBR胶粉的特性、加工方法。特别对其改性PVC和PF的优越性，分别用其鞋类、电气绝缘板、摩擦衬片等产品所体现出来的各项优异性能做出充分说明。其在橡胶工业上的应用以制作胶粘剂为例，阐述了使用胶粉可改革加工方法，摈弃密炼机，节省能源等诸多的优点。     

Synthesis and characterization of poly(keto-amines). 2. Self-polycondensation of 4-methyl-3-aminophenacyl chloride and 2-methyl-4-aminophenacyl chloride

Poly(keto-amines) such as poly(4-methyl-3-iminophenacyls) and poly(2-methyl-4-iminophenacyls) were prepared by self-polycondensation of 4-methyl-3-aminophenacyl chloride and 2-methyl-4-aminophenacyl chloride under different experimental conditions. All the polymer samples were insoluble in common organic solvents. They were characterized by elemental analysis, IR spectral studies, estimation of M?_n by non-aqueous conductometric titration and study of thermal properties by DTA. The properties of P4M3IP and P2M4IP were compared with those of poly(4-iminophenacyls).     

Grafting of methyl methacrylate onto guar gum by hydrogen peroxide initiation

Graft copolymerization of methyl methacrylate (MMA) onto guar gum (GG) in aqueous slurry has been carried out using hydrogen peroxide (H₂O₂) as initiator. The copolymers were characterized by infrared spectroscopy. The grafting parameters like percent grafting, grafting efficiency, percent add-on, and the grafting frequency were determined, and the effect of reaction time, concentration of initiator, and [GG]/[MMA] ratios on the grafting parameters have been discussed. The decrease in % add-on at increasing concentration of H₂O₂ indicated enhancement in the rate of homopolymerization of methyl methacrylate.     

Self-emulsifiable soybean oil phosphate ester polyols for low-VOC corrosion resistant coatings

A series of soybean oil phosphate ester polyols (SOPEP) was prepared by reaction of fully epoxidized soybean oil with phosphoric acid and simultanoeous hydrolysis in the presence of a polar solvent. The polyols were characterized by determination of acid value, oxirane number, hydroxyl value, molecular weight (GPC), and FTIR spectra. These polyols with varying amounts of acid phosphate groups could be self-emulsified to form aqueous dispersions after neutralization with organic base. These aqueous dispersion showed varying degrees of stability and their appearance ranged from opaque dispersions to translucent to clear solutions. Waterborne coating compositions were prepared using these aqueous dispersions as principal components and their thermally cured film properties were studied. it was found that by careful selection and formulation, SOPEPs can be successfully used for low-VOC waterborne coating formulations. SOPEPs with 3.5% phosphate ester content showed visibly superior corrosion resistance properties.     

Predicting elastic moduli of heterogeneous polymer compositions

A new method for predicting elastic moduli M of heterogeneous polymer compositions is proposed. It is based on a phenomenological adjustment between parallel and series models for upper and lower bound moduli M_U and M_L. Thus, where ?_H is the volume fraction of hard phase, ?_S is the volume fraction of soft phase, and n is the only adjustable parameter since the upper and lower bound moduli are given by and where M_H and M_S are the moduli of the pure hard and soft phases, respectively. Predicted values of M are in agreement with measured values in a number of systems which include polyblends and composite materials of fixed morphology. The significance of n is discussed relative to concentrations in the area of a phase transition for the polyblends or relative to phase morphology in the case of fixed morphology compositions. Interestingly, the relationship, by analogy, is in agreement with measured values of polyblend melt viscosities.     

Morphological, mechanical and gas-transport characteristics of crosslinked poly(propylene glycol): homopolymers, nanocomposites and blends

Linear polyethers possess unusually high CO₂ solubility and, hence, selectivity due to the presence of accessible ether linkages that can interact with the quadrupolar moment of CO₂ molecules. In this work, membranes derived from crosslinked poly(propylene glycol) diacrylate (PPGda) oligomers differing in molecular weight (M), as well as PPGda nanocomposites containing either an organically-modified montmorillonite clay or a methacrylate-terminated fumed silica are investigated and compared with highly CO₂-selective poly(ethylene glycol) diacrylate (PEGda) homopolymer and nanocomposite membranes previously reported. The rheological and permeation properties of PPGda depend sensitively on M, with the elastic modulus decreasing, but CO₂ permeability and CO₂/H₂ selectivity increasing, with increasing M. Incorporation of either nanofiller into PPGda enhances the elastic modulus and reduces the gas permeability in the resultant nanocomposites without strongly affecting CO₂/H₂ selectivity. Blending PPGda and PEGda prior to chemical crosslinking yields binary membranes that exhibit intermediate gas-transport properties accurately described by a linear rule of mixtures.     

Influence of Distributed Particle Size on the Determination of the Parabolic Rate Constant for Oxidation by the Powder Method

The established analysis for the study of oxidation using powder specimens is based on the assumption of monosized particles. The experiments, however, are conducted on powders with a distributed particle size. Here we present a statistical approach for the calculation of the rate constant for oxidation. The results of the analysis are applied to new data on oxidation studies of dense powders of silicon carbonitride amorphous ceramics. The monosized model requires a wide range of values for the rate constant to fit the short term and the long-term data, leading to considerable ambiguity in the estimate of the parabolic rate constant, k _p, for oxidation. In contrast the statistical model fits over the entire range of data, yielding a much more reliable value for k _p. For example, the monosized approach gave a value in the range 19.7 × 10⁻¹⁸ < k _p < 2.7 × 10⁻¹⁸ m²/s. In contrast, the statistical model yields a specific value of 4.5 × 10⁻¹⁸ m²/s.     

Formation of Nanocrystalline Calcia by the Decomposition of Calcite

Formation of nanocrystalline calcia from calcite has been studied in situ via transmission electron microscopy. The crystallographic transformation occurred via two mechanisms: the first is by distortion of the cleaved rhombohedron of calcite, formed by {104} planes in hexagonal coordinates, into a cube. This produced a microstructure of oriented, elongated nanocrystals of calcia with planar boundaries. In the second mechanism, the micrometer-sized parent calcite particles broke up into nano-sized grains as the decomposition began, leading to irregularly shaped, randomly oriented nanocrystals of calcia.     

A study on adsorption of poly(methyl methacrylate) on aluminium silicate

Effect of temperature, solvent power, and molecular weight on the adsorption of poly methyl methacrylate (PMMA) on aluminium silicate has been studied. Kinetics of adsorption have been also investigated at 30° and 45 °C. The values of rate constants at these temperatures are 1.4 · 10^?2 and 1.0 · 10^?2 min^?1 respectively. The adsorption data have been analysed according to the Langmuir and the Simha -Frisch -Eirich (SFE) isotherms. The results could be adequately explained in terms of the Langmuir isotherm.