Taguchi Optimization of Solvent-Antisolvent Crystallization to Prepare Ammonium Perchlorate Particles

The sphericity and size of ammonium perchlorate (AP) particles significantly influence the properties of composite propellants. As the AP particles become more spherical, the accumulation coefficient increases, the viscosity during casting decreases, and the particle loading and burning rate increase. Hence, the production of micronized AP particles with an average size between 1 and 20 μm is important to increase the loading percentage of AP in the composite propellant. Here, the Taguchi experimental design was used to optimize the solvent-antisolvent crystallization (SAC) process for the preparation of micronized AP particles with higher sphericity. SAC parameters such as the type of antisolvent, the solvent-to-antisolvent ratio, the antisolvent temperature, the stirring speed, and the retention time were investigated at four levels. The type of antisolvent and the solvent-to-antisolvent ratio were found to mainly contribute to improving the sphericity and size of the AP particles, respectively.     

A novel bilayer drug-loaded wound dressing of PVDF and PHB/Chitosan nanofibers applicable for post-surgical ulcers

A novel bilayer nanofibrous wound dressing, with enhanced mechanical properties is successfully fabricated. This membrane, consisted of polyvinylidenefluoride (PVDF) nanofibers for providing tensile strength and polyhydroxybutyrate/chitosan (PHB/CTS) nanofibers loaded with gentamicin with ability of controlled drug delivery, is a great choice for post-surgical ulcers. Mechanical properties showed dramatically improvement of tensile strength by addition of PVDF layer. Gentamycin release represented both an immediate and a sustained release of about 24?h and 1 week, respectively and release increment with increase of CTS ratio. Results also revealed that drug release in structures follow first order kinetic and Fickian release mechanism.     

Robust Diversity-based Sine-Cosine Algorithm for Optimizing Hydropower Multi-reservoir Systems

Hydropower energy generation depends on the available water resources. Therefore, planning and operation of the water resource systems are paramount tasks for energy management. Since reservoirs are one of the important components of water resources systems, extracting optimal operating policies for proper management of energy generated from these systems is an imperative step. Optimizing reservoir system operation (ORSO) is a non-linear, large-scale, and non-convex problem with a large number of constraints and decision variables. To solve ORSO problem effectively, a robust diversity-based, sine-cosine algorithm (RDB-SCA) is developed in the present study by introducing several strategies to balance the global exploration and local exploitation ability and to achieve accurate and reliable solutions. An efficient linear operation rule is coupled with the RDB-SCA to maximize the energy generation. The proposed method is then applied to a real-world, multi-reservoir system to extract optimal operational policies and, consequently, maximize the energy production. It is shown that the RDB-SCA is able to generate 24, 14, and 6% more energy than the original SCA, respectively for 2-, 3-, and 4-reservoir systems. The present findings are useful to suggest guidelines for efficient operation of hydropower multi-reservoir systems. This paper is supported by https://imanahmadianfar.com/codes.

     

Ag–Sr doped mesoporous bioactive glass nanoparticles loaded chitosan/gelatin coating for orthopedic implants

In this study, we investigated surface and biological properties of Ag–Sr-doped mesoporous bioactive glass nanoparticle (Ag–Sr MBGN) loaded chitosan/gelatin coatings deposited by electrophoretic deposition (EPD) on 316L stainless steel. The EPD parameters, that is, deposition time, applied voltage, and distance between the electrodes was optimized by the Taguchi design of experiment (DoE) approach. Scanning electron microscopy (SEM) images illustrated the spherical morphology of the synthesized Ag–Sr MBGNs with the mean particle size of 160 ± 20 nm. Energy-dispersive X-ray (EDX) spectroscopy results confirmed the presence of Ag and Sr in the synthesized MBGNs. Optimum EPD parameters determined by DoE approach were 5 g/L of Ag–Sr MBGNs, deposition time of 5 min, and applied voltage of 30 V. SEM images confirmed that the coatings were fairly homogenous. Fourier-transform infrared spectroscopy and EDX results confirmed the presence of chitosan, gelatin, and Ag–Sr MBGNs in the coatings. Chitosan/gelatin/Ag–Sr MBGN composite coatings exhibited suitable wettability for the protein attachment and proliferation of osteoblast cells. The composite coatings exhibited suitable adhesion strength with the substrate. The coatings developed HA crystals upon immersion in simulated body fluid. The results of the turbidity test confirmed that the coatings are antibacterial to the Escherichia coli cells.     

The Legendre wavelet method for solving initial value problems of Bratu-type

The aim of this work is to study the Legendre wavelets for the solution of initial value problems of Bratu-type, which is widely applicable in fuel ignition of the combustion theory and heat transfer. The properties of Legendre wavelets together with the Gaussian integration method are used to reduce the problem to the solution of nonlinear algebraic equations. Also a reliable approach for convergence of the Legendre wavelet method when applied to a class of nonlinear Volterra equations is discussed and an error estimation for the proposed method is also introduced. Illustrative examples have been discussed to demonstrate the validity and applicability of the technique and the results have been compared with the exact solution. We finally show the high accuracy and efficiency of the proposed method.     

Dynamic mechanical behavior and nanostructure morphology of hyperbranched‐modified polypropylene blends

Polypropylene (PP) was modified utilizing two types of polyesteramide‐based hyperbranched polymers (amphiphilic PS and hydrophilic PH). A maleicanhydride‐modified PP (PM) was used as a reactive dispersing agent to enhance the modification by grafting the hyperbranched polymers onto the PP chains. Pure PP, two different non‐reactively modified samples, i.e. excluding PM, and two different reactively modified samples, i.e. including PM, were studied. Investigating the morphology of the samples was performed by scanning electron microscopy. To follow the effect of the modification on the dynamic mechanical properties, dynamic mechanical analysis experiments both in the melt (rheometric mechanical spectrometry) and in solid state (dynamic mechanical thermal analysis) were carried out. In the next step, the nanocrystalline structure of the samples was studied by small angle X‐ray scattering (SAXS) in two different modes, i.e. static and recrystallization. Hundreds of SAXS patterns were analyzed automatically using procedures written in PV‐WAVE image‐processing software. The chord distribution function (CDF) was calculated and the long period (l_p) of the crystal lamellae was extracted from the CDFs. The rheometric mechanical spectrometry results show that both hyperbranched polymers decrease complex viscosity η^* and enhance liquid‐like behavior. This happens more significantly when PM is included. The dynamic mechanical thermal analysis results reveal that T_g decreases when PS and PH are added. In the reactively modified samples this reduction is compensated most probably because of the crosslinked structure formed through the grafting reaction between the hyperbranched polymers and PM. Such structure is confirmed by SAXS data and calculated CDFs in the recrystallization mode. Static SAXS data also show enhancement in the crosshatched morphology of the crystalline lamellae of PP for reactively modified samples compared with non‐reactively modified samples. © 2013 Society of Chemical Industry     

Modification of poly(propylene) by grafted polyester‐amide‐based dendritic nanostructures with the aim of improving its dyeability

Fiber‐graded poly(propylene) was modified by polyester‐amide‐based dendritic nanostructures with the aim of improving its dyeability. Two different dendritic polymers were used and the dendritic nanostructures were formed in situ via reactive blending with maleic anhydride‐modified poly(propylene). Samples were chosen exploiting a 4‐component mixture design. Thermal, morphological, and rheological characterizations showed domains with different size and distribution were formed and primary properties of the dendritics determined the characteristics of the resulted domains. Morphological parameters were quantified by digital analysis of scanning electron microscope images. Thermal and rheological behavior also demonstrated good agreements with the inferred morphology of the formed dendritic domains. The modified samples were then dyed with dispersed dyestuffs. A variety of substantivities were obtained, and some of the modified samples showed a significant enhancement in dyeing properties. A predictive model was developed for K/S ratio, where K and S are absorption and scattering coefficients of the Kubelka‐Munk one constant theory, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012