Study of the effect of dilution on the lubricity of hydrotreated jet engine fuels

Hydrotreated fuels lack lubricity. Dilution with chemically treated conventional fuels is reported to restore lubricity. Studies revealed that some conventional fuels have lubricity inferior to the hydrotreated fuels. Thus dilution with conventional fuel is not a sure cure.     

Correlates of household smoking bans among Chinese Americans.

No population-based data are available on the degree to which Chinese Americans have adopted smoke-free household policies and whether these policies are effective in reducing environmental tobacco smoke (ETS) exposure. The present study examines the prevalence of smoke-free home rules among Chinese Americans living in New York City, describes predictors of adopting full smoking bans in the home, and explores the association between household smoking restrictions and ETS exposure at home. In-person interviews using a comprehensive household-based survey were conducted with 2,537 adults aged 18-74 years. Interviews were conducted in Mandarin, Cantonese, and other Chinese dialects. A total of 66% of respondents reported that smoking was not allowed inside the home, 22% reported a partial ban on smoking in the home, and 12% reported no smoking ban. Among current smokers, 38% reported a full household smoking ban. Current smoking status was the strongest predictor of less restrictive household smoking policies. Knowledge of the dangers of ETS, support of smoke-free air legislation, years in the United States, gender, income, and marital status also were associated with household smoking bans. Those living with a total household smoking ban were significantly less likely to report 30-day exposure to ETS than were those living in homes with a partial ban or no ban (7% vs. 68% and 73%, respectively). In homes of smokers and nonsmokers alike, exposure to ETS remains high. Smoke-free home rules and interventions among smokers and nonsmokers to raise awareness of the dangers of ETS have the potential to significantly reduce exposure to household ETS among this immigrant population.     

Development of novel interpenetrating network gellan gum-poly(vinyl alcohol) hydrogel microspheres for the controlled release of carvedilol

Novel interpenetrating polymeric network microspheres of gellan gum and poly(vinyl alcohol) were prepared by the emulsion cross-linking method. Carvedilol, an antihypertensive drug, was successfully loaded into these microspheres prepared by changing the experimental variables such as ratio of gellan gum:poly(vinyl alcohol) and extent of cross-linking in order to optimize the process variables on drug encapsulation efficiency, release rates, size, and morphology of the microspheres. Formation of interpenetrating network and the chemical stability of carvedilol after preparing the microspheres was confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetry and x-ray diffraction studies were made on the drug-loaded microspheres to investigate the crystalline nature of the drug after encapsulation. Results indicated a crystalline dispersion of carvedilol in the polymer matrix. Scanning electron microscopy confirmed the spherical nature and smooth surface morphology of the microspheres produced. Mean particle size of the microspheres as measured by laser light scattering technique ranged between 230 and 346 µm. Carvedilol was successfully encapsulated up to 87% in the polymeric matrices. In vitro release studies were performed in the simulated gastric fluid or simulated intestinal fluid. The release of carvedilol was continued up to 12 h. Dynamic swelling studies were performed in the simulated gastric fluid or simulated intestinal fluid, and diffusion coefficients were calculated by considering the spherical geometry of the matrices. The release data were fitted to an empirical relation to estimate the transport parameters. The mechanical properties of interpenetrating polymeric networks prepared were investigated. Network parameters such as molar mass between cross-links and cross-linking density for interpenetrating polymeric networks were calculated.     

Delay-on-Demand: A Signaling Protocol to Reduce Blocking Probability in Optical Burst-Switching Networks

Optical burst switching (OBS) is emerging as one promising switching paradigm for the next generation optical networks. To support multiple services in burst-switching networks, the OBS paradigm should support some quality-of-service (QoS) provisioning. A major design issue in such networks is to reduce the blocking probability of the bursts arising due to resource contention at the intermediate core router. In this paper, we propose a signaling protocol which we call ‘Delay-on-Demand’ (OBS-DoD), to reduce blocking probability and support QoS in optical burst-switching networks. The proposed scheme guarantees that at least one of the bursts succeeds depending on its priority, propagation delay from the ingress router, and the burst-size when contention occurs at the core router. For this, we use a control packet to delay, in case of a contention, the transmission of bursts at the ingress router. We compare the performance of our proposal, by simulation, with an earlier proposed scheme, and show that the proposed OBS-DoD outperforms the earlier scheme in reducing the blocking probability. For simulation, we generated bursty traffic using an M/Pareto distribution.     

Simulation of reversible nylon-66 polymerization in homogeneous continuous-flow stirred tank reactors

Experimental data of Ogata¹ has been curve-fitted to obtain the forward and reverse rate constants for nylon-66 polymerization. Its molecular weight distribution (MWD) has been simulated in homogeneous continuous-flow stirred tank reactors (HCSTR) for 11 h of residence time when the reaction mass is very close to equilibrium. The set of algebraic equations have been solved using Brown's algorithm,² which was found to be more efficient compared to the Gauss-Jordon techniques of solution. The MWD thus obtained is compared with our earlier simulation of the molecular weight distribution from batch reactors³ and was found to differ significantly. In HCSTR, the weight fraction distribution does not undergo a maximum and the polydispersity index ρ of the polymer formed is much higher than that obtained from batch reactors. The number and weight average of the polymer formed in HCSTR is found to be significantly lower.     

Spectral selectivity and accelerated life testing of Al-PbS solar selective surfaces

High absorptance and low thermal emittance selective surfaces have been formed by evaporating lead sulphide onto Al evaporated Al substrates. The dependence of selectivity, α/?, on thickness has been studied. The maximum selectivity was obtained for PbS thickness of 400 Å. The emissivity is found to increase with temperature. The coatings are stable up to a temperature of 240°C in air. Long term ultraviolet irradiation causes the photo-oxidation of PbS to PbSO₄ which results in the increase of emittance and a decrease in absorptance. When cycled between 0°C and 200°C, the coatings do not show any signs of degradation.     

Nonmeat Protein Alternatives as Meat Extenders and Meat Analogs

Abstract: The direct consumption of vegetable proteins in food products has been increasing over the years because of animal diseases, global shortage of animal protein, strong demand for wholesome and religious (halal) food, and economic reasons. The increasing importance of legume and oilseed proteins in the manufacturing of various functional food products is due to their high‐protein contents. However, the greatest obstacle to utilizing these legumes and oilseeds is the presence of antinutrients; but these antinutrients can be successfully removed or inactivated by employing certain processing methods. In contrast, the potential negative impact of the antinutrients is partially balanced by the fact that they may have a health‐promoting role. Legumes and oilseeds provide well‐balanced amino acid profiles when consumed with cereals. Soybean proteins, wheat gluten, cottonseed proteins, and other plant proteins have been used for texturization. Texturized vegetable proteins can extend meat products while providing an economical, functional, and high‐protein food ingredient or can be consumed directly as a meat analog. Meat analogs are successful because of their healthy image (cholesterol free), meat‐like texture, and low cost. Mycoprotein is fungal in origin and is used as a high‐protein, low‐fat, health‐promoting food ingredient. Mycoprotein has a good taste and texture. Texturized vegetable proteins and a number of mycoprotein products are accepted as halal foods. This article summarizes information regarding the molecular, nutritional, and functional properties of alternative protein sources to meat and presents current knowledge to encourage further research to optimize the beneficial effects of alternative protein sources.     

Determination of Mineral Composition and Heavy Metal Content of Some Nutraceutically Valued Plant Products

Minerals and heavy metal concentrations of 23 plants (arial parts, leaves, bark, stem, root, rhizome, dried berries, seeds) possessing health-promoting effects and used in indigenous medicines (as medicinal food) were determined using inductively coupled plasma atomic spectrometry. Vital essential minerals and heavy metals were present in all the samples analyzed. The majority of the plant materials were rich in some of the essential minerals like Na, K, Ca, Fe, Mg, Cu, Mn, and Zn, which are known to be beneficial for health. The plant material of Vitiveria zizinalis had highest concentration of toxic heavy metals, including arsenic (53.1 mg/100 g), chromium (6.74 mg/100 g), cobalt (10.2 mg/100 g), mercury (3.6 mg/100 g), and nickel (3.28 mg/100 g). Results of the present study provide vital data on the availability of some essential minerals, which can be useful to provide dietary information for designing value-added foods and for food biofortification. Apart from this, data on the contaminant levels of heavy metals highlights the necessity on the quality and safety concerns about their use.     

Induction of chemical and moisture resistance in Saccharum spontaneum L fiber through graft copolymerization with methyl methacrylate and study of morphological changes

In this article, morphological modification of Saccharum spontaneum L, a natural fiber through graft copolymerization with methylmethacrylate using ferrous ammonium sulfate—potassium per sulfate redox initiator has been reported. Different reaction parameters such as reaction temperature, time, initiator molar ratio, monomer concentration, pH and solvent were optimized to get maximum graft yield (144%). The graft copolymers thus formed were characterized by Fourier transform infrared, scanning electron microscopy, X‐ray diffraction and thermogravimetric, differential thermal analysis, and differential thermogravimetric techniques. Graft copolymer has been found to be more moisture resistant and also showed higher chemical and thermal resistance. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Temperature Responsive Solution Partition of Organic–Inorganic Hybrid Poly(N‐isopropylacrylamide)‐Coated Mesoporous Silica Nanospheres

A series of poly(N‐isopropylacrylamide)‐coated mesoporous silica nanoparticle materials (PNiPAm‐MSNs) has been synthesized by a surface‐initiated living radical polymerization with a reversible addition–fragmentation chain transfer (RAFT) reaction. The structure and the degree of polymerization of the PNiPAm‐MSNs has been characterized by a variety of techniques, including nitrogen sorption analysis, ²⁹Si and ¹³C solid‐state NMR spectroscopy, transmission electron microscopy (TEM), and powder X‐ray diffraction (XRD). The thermally induced changes of the surface properties of these polymer‐coated core–shell nanoparticles have been determined by examining their partition activities in a biphasic solution (water/toluene) at different temperatures.