Influence of buried topography on surface drainage pattern

Abstract

An automated system has been developed for mosaicking spaceborne synthetic aperture radar (SAR) imagery. The system is capable of producing multiframe mosaics for large-scale mapping by combining images in both the along-track direction and adjacent cross-track swaths from ascending and descending passes. The system requires no operator interaction and is capable of achieving high registration accuracy. The output product is a geocoded mosaic on a standard map grid such as UTM or polar stereographic. The procedure described in detail in this paper consists essentially of remapping the individual image frames into these standard grids, frame-to-frame image registration and radiometric smoothing of the seams. These procedures are directly applicable to both the Magellan Venus Mapper and a scanning SAR design such as Radarsat, Eos SAR in addition to merging image frames from traditional SAR systems such as SEASAT and SIR-B. With minor modifications, it may also be applied to spaceborne optical sensor data to generate large-scale mosaics efficiently and with a high degree of accuracy. The system has been tested with SEASAT, SIR-B and Landsat TM data. Examples presented in this paper include a 38-frame mosaic of the Yukon River basin in central Alaska, a 33-frame mosaic of southern California and a three-frame terrain-corrected geocoded mosaic of the Wind River basin in Wyoming.     

On the polymeric foams: modeling and properties

Polymeric foams are now widely used and researched. The physical properties of polymeric foam can be related to a set of independent structural parameters or variables of the foam. Study of these variables and correlation with commercial FE packages is essential for reliable and faster product development. Some aspects of foam behavior are widely studied while some are little less, like correlation of physical unloading behavior. For example, a lot of work in the area of phenomenological constitutive modeling of uniaxial loading was done, though research in areas of unloading–reloading and their correlation still demands more attention. Increasing number of OEMs and suppliers are moving to computer simulations in the design phase to assess their future products. Hence, different parameters within FE packages play a significant role and also affect the results. Appropriate use of these parameters will narrow down error band and automatically reduce the cycle time and development cost. This brief review is expected to set the perspective for major research work done so far in terms of FE modeling correlation and constitutive modeling of polymeric foam vis-a-vis to its properties.     

Congestion detection technique for multipath routing and load balancing in WSN

In WSN, nodes collect the information from the surrounding environment and transferring to base station. Multiple data transmission in a WSN causes the nodes near the base station to get congested. Here we propose to develop a congestion avoidance and mitigation technique. For that, we select routes based on the distance between sender and receiver, relative success rate (RSR) value of node and buffer occupancy of a node. Based on these three parameters, we define a utility function to be applied to each neighbor of a transmitter node. Hence the transmitter node chooses the highest U-valued node as its next hop node among its neighbors in packet forwarding. Thus we avoid congestion by choosing non-congested nodes as its next hop node and then we mitigate congestion based on RSR values.     

Self generating square/triangular wave and pulse width modulator using a single MO-CCCDTA

A self-generating square/triangular wave and pulse width modulator (PWM) using multiple output current controlled current differencing transconductance amplifier (MO-CCCDTA) is presented. To obtain all the three functions simultaneously from the same topology, the MO-CCCDTA is modified a little bit. The characterisation of the modified MO-CCCDTA structure shows that the parasitic resistances at input terminals (n and p) can be varied via bias current. The maximum useful frequency range is found to be 635 MHz, which is higher than the available literature. The waveform generator and PWM circuit use only one MO-CCCDTA, one grounded capacitor and no resistor; hence suitable for IC implementation. The duty cycle of proposed pulse width modulation can be tuned by bias current of MO-CCCDTA over a wide range. The performances of the proposed block and its applications (square/triangular/PWM) are verified by PSPICE simulation using TSMC 0.35 µm technology. The power consumption is about 1.12 mW. To verify experimentally, a prototype of MO-CCCDTA has been made using commercially available ICs (AD844AN and CA3080) on printed circuit board. The simulation and experimental results verify theoretical proposition well. Monte carlo simulation is carried out, which proves satisfactory performance of the proposed circuit against mismatches. The performance of the proposed circuit is also verified through pre-layout and post-layout simulation results. The required chip area is only 22.415 × 14.6 µm².     

Deep Convolutional Neural Network for Graphics Forgery Detection in Video

Wireless Personal Communications - Doctored video generation with easily accessible editing software has proved to be a major problem in maintaining its authenticity. Nowadays, deep neural networks...     

2011 CAV award announcement

The 2011 CAV (Computer-Aided Verification) Award was presented on July 17, 2011 at the 23rd annual CAV conference in Snowbird, Utah to Thomas Ball and Sriram Rajamani of Microsoft Research for their contributions to software model checking, specifically the development of the SLAM/SDV software model checker, which successfully demonstrated computer-aided verification techniques on real programs.     

Optimization of the Security-Performance Tradeoff in RC4 Encryption Algorithm

Wireless Personal Communications - In this paper, we have investigated different vulnerabilities in RC4 and its enhanced variants to overcome the security attacks. It is established that in spite...     

Novel organic–inorganic composite material as a cation exchanger from a triterpenoidal system of dammar gum: synthesis,characterization and application

A pioneer study has been conducted to synthesize novel hydrogel starting from a non-cellulosic raw material, gum dammar-a triterpenoidal system, and then converting this hydrogel into an organic–inorganic composite zirconium-based ion exchanger. Gum dammar was cross-linked with polyacrylamide zirconium (IV) iodo-oxalate [Gd-cl-poly(AAm)-Zr (IV) iodo-oxalate] by incorporating inorganic precipitates into the polymeric mixture. The polymeric mixture was synthesized using gum dammar (Gd), acrylamide (AAm), N, N′-methylene-bis-acrylamide (MBA) and potassium persulphate (KPS). The reaction conditions for synthesis of hydrogel and ion exchanger such as time (120 min), temperature (70 °C), solvent (4 mL), concentration of monomer (12.97 × 10^?3 mol/L), initiator (1.48 × 10^?4 mol/L), cross-linker (4.22 × 10^?4 mol/L) and ratio of zirconium oxychloride (0.1 M), potassium iodate (0.1 M) and oxalic acid (0.1 M) in ratio 2:3:2 were optimized to obtain maximum ion exchange capacity (2.02 meq/g). The morphology and structure of hydrogel and ion exchanger were studied using FTIR, SEM, XRD and TGA/DTA/DTG. The SEM study was followed by energy dispersive spectroscopy for elemental analysis. The ion exchanger was quite stable in various acids and bases at low concentration but it completely dissolved in acids and bases at high concentrations. Distribution studies showed that the synthesized ion exchanger had high selectivity for Pb²⁺ ions. Thus, the polymeric-inorganic hybrid material showed integration of both inorganic and organic characteristics within the composite material.     

Investigation of Nd3+ incorporation in Ce-rhabdophane: Insight from structural flexibility and occupation mechanism

LnPO₄ · 0.667H₂O rhabdophane has been considered as a potential material for the precipitation of actinides from radioactive waste liquid, owing to its outstanding characteristics of high actinide bearing and easy synthesis in acid solutions. However, a comprehensive understanding of the actinide occupation and the precipitation response of rhabdophane to remove actinides has yet to be established. In this study, the effect of ions concentration and pH values on the detailed precipitation reaction of Ce_xNd_1-xPO₄ · 0.667H₂O rhabdophane in acid solutions are systematically investigated. Some specific issues such as structural distortion and flexibility, and occupation mechanism are discussed by combining with experiments and density functional theory (DFT) calculation. The results reveal that ions concentration and pH values have a significant impact on the crystallization nucleation step before 12 h. The obtained removal rate of Nd³⁺ is more than 99% in pH 1–5 solutions with the ions concentration of 0.05–0.1 mol/L. Moreover, incorporating Nd in CePO₄ · 0.667H₂O rhabdophane will easily result in the lattice distortion in b-axis. DFT calculation and X-ray photoelectron spectroscopy (XPS) results reveal that Nd is preferentially incorporated in nonhydrated site to form a weaker binding energy of NdO₈ polyhedron.