In vitro corrosion behaviour of plasma nitrided Ti–6Al–7Nb orthopaedic alloy in Hanks solution

Titanium alloy (Ti–6Al–7Nb) used for orthopaedic applications was nitrided using a conventional dc plasmatechnique. Load-dependent microhardness measurements exhibit a hardness of 2087 H_v at 25 g load for the alloy nitrided at 900 8C for 8 h. Cyclic polarization measurement in Hanks solution show maximum corrosion rate and minimum areaof repassivation for the alloy nitrided for 8 h at 900 8C. Electrochemical impedance measurements show an increase in charge transfer resistance and decrease in double layer capacitance when compared to untreated alloy.     

Influence of iron doping towards the physicochemical and biological characteristics of hydroxyapatite

Hydroxyapatite (HAP) is the naturally occurring mineral form of calcium apatite and the most studied material as a bone substituent. Considering HAP's inherent properties, this study explored changes in HAP's characteristics from doping with other metals such as Fe. To form pure HAP and Fe-HAP with different amounts of Fe, we used the hydrothermal approach, and the composites that formed were thoroughly analyzed for their crystallinity, surface bonding, morphology, magnetic behavior, mechanical strength, biocompatibility, hemocompatibility, and in vitro cytotoxicity. The powder XRD studies confirmed the samples' crystallinity, and the lowest crystalline size was 19.7 nm in 10Fe-HAP. The FTIR analysis confirmed the formation of HAP by the hydroxyl, phosphate, and carbonate groups. The FESEM demonstrated that the morphology of the pure HAP was rod-shaped, which transformed into spheres after Fe doping. The EDS analysis confirmed the successful formation of HAP and Fe-HAP composites. The magnetic studies indicated the diamagnetic behavior of the pure HAP, while the Fe-doped HAPs had a superparamagnetic nature with saturation magnetizations (M_s) of 2Fe-HAP, 4Fe-HAP, and 10Fe-HAP at 0.0062, 0.0092, and 0.029 emu/g respectively. Assessment of the mechanical properties, biocompatibility, hemocompatibility, and cytotoxicity indicated that the Fe-doped HAPs were superior to the pure HAP, and among the Fe-HAPs, the 10Fe-HAP) had the highest amount of Fe and the best characteristics. The studies also indicated that Ca²⁺ interactions influenced the cells via HAP doping with that of Fe, equally increasing the physicochemical and biological properties.     

Dispatching rules for scheduling in assembly jobshops - Part 1

Research on jobshop scheduling has tended to concentrate on the development of dispatching rules for jobs that are independent, i.e. single-component jobs. However, in real-life situations, many jobs involve assembly operations that require scheduling of multiple components through the jobshop where both serial and parallel operations take place. In this two-part paper, we consider the problem of scheduling in assembly jobshops, i.e. jobshops that manufacture multi-level assembly jobs. The development of new and efficient dispatching rules with a view to address various measures of performance related to flowtime and staging delay of jobs is first undertaken. A new concept, called 'operation synchronization date' is introduced and made use of in the new dispatching rules. The best existing dispatching rules and the proposed dispatching rules are relatively evaluated by an exhaustive simulation study. The results indicate that the proposed rules emerge to be superior to the existing ones for most measures of performance.     

Nitrites Derived From Foneiculum Vulgare (Fennel) Seeds Promotes Vascular Functions

Abstract: Recent evidence has demonstrated that nitrites play an important role in the cardiovascular system. Fennel (Foneiculum vulgare) seeds are often used as mouth fresheners after a meal in both the Indian sub‐continent and around the world. The present study aims to quantify the nitrite and nitrates in fennel seeds as well as elucidating the effect of fennel derived‐nitrites on vascular functions. Results from our study show that fennel seeds contain significantly higher amount of nitrites when compared to other commonly used post‐meal seeds. Furthermore our study confirmed the functional effects of fennel derived‐nitrites using in vitro and ex vivo models that describe the promotion of angiogenesis, cell migration, and vasorelaxation. We also showed that chewing fennel seeds enhanced nitrite content of saliva. Thus our study indicates the potential role of fennel derived‐nitrites on the vascular system. Practical Application: This study is focused on determining the effect of fennel‐derived nitrites on angiogenesis (the formation of new blood vessels from pre‐existing ones), cell migration, and vasorelaxation (dilation of blood vessels) thereby preserving cardiovascular health.     

Aqueous Slip Casting of Transparent Aluminum Oxynitride

Highly transparent Aluminum oxynitride (AlON) body has been produced using aqueous slip casting technique. High‐purity alumina and AlN were used as raw materials for the synthesis of single‐phase AlON powder. As‐synthesized AlON powder was surface modified to enable the AlON powders resistant to hydrolysis in water during aqueous slip casting. High solid loaded aqueous AlON slip was prepared for casting followed by drying and sintering to produce transparent AlON. Phase formation and stability was characterized by XRD, pH, and viscosity measurements. AlON powders before and after surface treatments were characterized. Sintered transparent AlON samples were characterized for their mechanical, microstructural, and optical properties. Sintered and polished AlON produced in this study has shown inline transparency up to 80% between 0.22 and 6 μm wavelength region.     

Green Nanosilver as Reinforcing Eco-Friendly Additive to Epoxy Coating for Augmented Anticorrosive and Antimicrobial Behavior

Epoxy resin GY250 representing diglycidyl ethers of bisphenol-A (DGEBA) was reinforced with 1, 3 and 5wt % of surface functionalized silver nanoparticles (F-AgNPs) which were synthesized using Couroupita guianensis leaves extract with a view of augmenting the corrosion control property of the epoxy resin and also imparting antimicrobial activity to epoxy coatings on mild steel. Corrosion resistance of the coatings was evaluated by EIS, potentiodynamic polarization studies and cross scratch tests. AFM, SEM, HRTEM and EDX were utilized to investigate the surface topography, morphology and elemental composition of the coatings on MS specimens. Results showed that the corrosion resistance, hardness and T_g of the DGEBA/F-AgNPs coatings increased at 1wt % of F- AgNPs. The DGEBA/F-AgNPs coatings also offered manifold antimicrobial protection to the MS surfaces by inhibiting the growth of biofilm forming bacteria like P. aeruginosa, B. subtilis, the most common human pathogen E. coli and the most virulent human pathogenic yeast C. albicans.     

Plant products as fumigants for stored-product insect control

Research studies on plant essential oils and their constituents as fumigants, i.e., compounds acting on target insects in the vapour or gaseous phase, against stored-product insects have been reviewed. Fumigant toxicity tests conducted with essential oils of plants (mainly belonging to Apiaceae, Lamiaceae, Lauraceae and Myrtaceae) and their components (cyanohydrins, monoterpenoids, sulphur compounds, thiocyanates and others) have largely focused on beetle pests such as Tribolium castaneum, Rhyzopertha dominica, Sitophilus oryzae and Sitophilus zeamais but little or no attention has been paid towards moths such as Corcyra cephalonica and Sitotroga cerealella. Adults were generally susceptible, whereas, eggs were either tolerant or highly susceptible depending on insect species and the type of essential oil or component. The essential oils proved effective in mixture with CO₂ or ethyl formate. Mode of action studies on monoterpenoids indicate inhibition of acetylcholinesterase enzyme activity as the major site of action. Although, in laboratory tests with adult insects, some of the plant compounds have shown insect toxicity comparable to methyl bromide or chloropicrin, their physical properties such as high molecular weight as well as high boiling point and very low vapour pressure are barriers for application in large-scale fumigations. Plant products, therefore, have the potential for small-scale treatments, space fumigations and as adjuvants for conventional fumigants. The constraints including lack of data for single or multiple components of essential oils on sorption, tainting and residues in food commodities, and registration protocols have been highlighted. The use of egg and pupal stages or preferably mixed-age cultures of target insects in screening tests with any new plant essential oil/compound has also been stressed.     

Prediction of optimum process parameters to achieve eco-friendly desizing of organic cotton fabrics with indigenously produced alpha-amylase and their enzyme kinetics

An attempt has been made to study the desizing of polyvinyl alcohol (PVA) starch-based organic cotton fabric using alpha-amylase enzyme with various process parameters such as enzyme concentration, temperature and reaction time. These process variables are selected based on the Box–Behnken design of experiment and the output of experiment resulted in weight loss of the fabric and their results are optimized with minimum error. The test results are analyzed using Design-Expert software 8.0 to predict the optimum process parameters to achieve the required desizing efficiency and their results are compared with actual trials. The alpha-amylase enzyme kinetics are studied at various concentrations, temperatures and reaction times to optimize the desizing process parameters. The performance of desizing was assessed by an iodine test and FTIR results to confirm the degradation of PVA starch in the desized organic cotton fabrics.