Comparative Study on Thermodynamic Analysis of CO2 Utilization Reactions

Thermodynamic analysis of dimethyl ether (DME) and methane synthesis from CO₂ hydrogenation, and dry reforming of methane was performed using Gibbs free energy minimization. The effects of temperature, pressure, and feed composition on conversion, selectivity, and yield were investigated for each process. High pressure, high H₂/CO₂ ratio, and low temperature favored DME production. The yield of methane during CO₂ methanation increased at lower temperature, higher pressure, and H₂/CO₂ ratio. The yield of synthesis gas improved at higher temperature. Comparison of the three processes demonstrated that the CO₂ conversion was highest during CO₂ methanation reaction if the fraction of CO₂ mol in the feed was less than 0.3. Above this value in the feed, dry reforming allowed the highest CO₂ conversion.     

Destruction of percolative network using green synthesized gold nanoparticles: Formation of high dielectric material

Gold nanoparticles (AuNPs) of about 5 nm in diameter were biosynthesized at room temperature (300 K). The PVA/2.5 wt% KH₂PO₄ or KDP composite film and PVA/2.5 wt% KDP/AuNPs nanocomposite films with different concentrations of AuNPs were prepared. Interestingly, addition of 0.05 wt% of AuNPs to the PVA/2.5 wt% KDP percolative composite film destroys percolative behavior of this composite film. Furthermore, the PVA/2.5 wt% KDP/0.05 wt% AuNPs nanocomposite film exhibited high room temperature dielectric permittivity (ε′ ∼ 590 at 1 kHz). The behavior of AC conductivity (σ_ac) of the nanocomposite films indicated correlated barrier hopping type of conduction mechanism. The Cole–Davidson dielectric response becomes evident as the interfacial polarization process acquires a more symmetric form, tending to Debye relaxation. High value of ε′ promises direct application in capacitors. Moreover, the novel feature of destroying the percolative behavior by AuNPs may be applied even in other systems.     

Phytol Derivatives as Drug Resistance Reversal Agents

Phytol was chemically transformed into fifteen semi‐synthetic derivatives, which were evaluated for their antibacterial and drug resistance reversal potential in combination with nalidixic acid against E. coli strains CA8000 and DH5α. The pivaloyl ( 4 ), 3,4,5‐trimethoxybenzoyl ( 9 ), 2,3‐dichlorobenzoyl ( 10 ), cinnamoyl ( 11 ), and aldehyde ( 14 ) derivatives of phytol ((2E,7R,11R)‐3,7,11,15‐tetramethyl‐2‐hexadecen‐1‐ol) were evaluated by using another antibiotic, tetracycline, against the MDREC‐KG4 clinical isolate of E. coli. Derivative 4 decreased the maximal inhibitory concentration (MIC) of the antibiotics by 16‐fold, while derivatives 9 , 10 , 11 , and 14 reduced MIC values of the antibiotics up to eightfold against the E. coli strains. Derivatives 4 , 9 , 10 , 11 , and 14 inhibited the ATP‐dependent efflux pump; this was also supported by their in silico binding affinity and down‐regulation of the efflux pump gene yojI, which encodes the multidrug ATP‐binding cassette transporter protein. This study supports the possible use of phytol derivatives in the development of cost‐effective antibacterial combinations.     

Solving conflicting bi-objective facility location problem by NSGA II evolutionary algorithm

This paper focuses on the facility location problem with two conflicting objectives. We observe that minimization of the total cost of a particular echelon may lead to the increase in the total cost of a supply chain as a whole. Thus, these conflicting objectives are required to be met together from a supply chain perspective. We have solved the problem formulated in mixed nonlinear programming by a multi-objective evolutionary algorithm (MOEA) known as non-dominated sorting algorithm, or NSGA II in short. Numerical example is provided to show the effect of the algorithm on the solution.     

Development of an intelligent agent-based AGV controller for a flexible manufacturing system

Automated guided vehicles (AGVs) are the most flexible means to transport materials among workstations of a flexible manufacturing system. Complex issues associated with the design of AGV control of these systems are conflict-free shortest path, minimum time motion planning and deadlock avoidance. This research presents an intelligent agent-based framework to overcome the inefficacies associated with the aforementioned issues. Proposed approach describes the operational control of AGVs by integrating different activities such as path generation, journey time enumeration, collision and deadlock identification, waiting node location and its time estimation, and decision making on the selection of the conflict-free shortest feasible path. It represents efficient algorithms and rules associated with each agent for finding the conflict-free minimum time motion planning of AGVs, which are needed to navigate unidirectional and bidirectional flow path network. A collaborative architecture of AGV agent and its different modules are also presented. Three complex experimental scenarios are simulated to test the robustness of the proposed approach. It is shown that the proposed agent-based controller is capable of generating optimal, collision- and deadlock-free path with less computational efforts.     

Evaluation of carbon black slurries as clean burning fuels

Experiments were performed to examine the pumpability, atomization and combustion characteristics of slurries made of mixtures of carbon black with No. 2 fuel oil and methanol. Carbon black-No. 2 fuel oil and carbon black-methanol slurries, with carbon black contents of up to 50 and 45 wt%, respectively, were pumped and atomized by means of a peristaltic pump and air atomizing scheme, and burned in an 82 kW laboratory combustor. Measurements of slurry spray droplet size distributions indicated mean droplet diameters of approximately 100 and 30 μm for the carbon black-No. 2 fuel oil and carbon black-methanol mixtures, respectively. Particulate emissions from the combustion of slurries containing 47 wt% carbon black in No. 2 fuel oil and 42 wt% carbon black in methanol were approximately 40 and 28 mg dm⁻³, respectively. These paniculate emissions are significantly higher than corresponding emissions from ‘base case’ No. 2 fuel oil and methanol tests (0.75 and 0 mg dm⁻³, respectively). However, in spite of the increased particulate emissions, carbon monoxide emissions from all tests were similar (less than 50 ppm dry, corrected to 0% oxygen, for furnace stoichiometric ratios of 1.05 or greater). In addition, at 20% excess air, nitric oxide emissions from the combustion of the carbon black-No. 2 fuel oil and carbon black-methanol (approximately 50 and 15 ppm, respectively) were approximately half of those measured from the combustion of No. 2 fuel oil and methanol (105 and 30 ppm, respectively). Although not examined here, the use of dispersants, stabilizers and modifications to the atomization equipment could improve the burning characteristics of carbon black slurries.     

Experimental Characterization of Micro-Friction on a Mica Surface Using the Lateral Motion and Force Measurement Capability of an Instrumented Indenter

An experimental characterization of friction forces between asymmetric surfaces in the micro-regime is presented. The lateral motion and force-measurement capability of an instrumented indenter (triboindenter) is characterized and explored for determining friction properties at low velocities. Friction experiments are performed using the triboindenter with high repeatability. It is observed that real-time depth measurements closely follow the Hertzian prediction. Friction spikes with magnitudes depending on the drive velocity input are observed with peak friction force increasing with the dwell time. Anisotropy is observed between surfaces of different materials with stick-slip occurring only at specific relative orientations. Directions for expanding the current range of the triboindenter to obtain data from the nano to the macro scale are also presented.     

Note: A portable pulsed neutron source based on the smallest sealed-type plasma focus device

Development and operation of a portable and compact pulsed neutron source based on sealed-type plasma focus (PF) device are reported. The unit is the smallest sealed-type neutron producing PF device. The effective volume of the PF unit is 33 cm(3) only. A compact size single capacitor (4 μF) is used as the energy driver. A battery based power supply unit is used for charging the capacitor and triggering the spark gap. The PF unit is operated at 10 kV (200 J) and at a deuterium gas filling pressure of 8 mb. The device is operated over a time span of 200 days and the neutron emissions have been observed for 200 shots without changing the gas in between the shots. The maximum yield of this device is 7.8 × 10(4) neutrons/pulse. Beyond 200 shots the yield is below the threshold (1050 neutrons/pulse) of our (3)He detector. The neutron energy is evaluated using time of flight technique and the value is (2.49 ± 0.27) MeV. The measured neutron pulse width is (24 ± 5) ns. Multishot and long duration operations envisage the potentiality of such portable device for repetitive mode of operation.     

Electron microscopic observations on the alterations of tegumental surface of Raillietina echinobothrida treated with root-peel extract of Potentilla fulgens

Potentilla fulgens, a member of the family Rosaceae, has been known since ancient times in Northeast India for its antiparasitic, antitumour and antidiabetic properties. The crude ethanolic extract of the plant was assayed against Raillietina echinobothrida, the intestinal cestode parasite of domestic fowl to authenticate the putative anthelmintic efficacy and cestocidal potential in particular of the plant. Treatment of the worm in-vitro with 25, 50 and 100 mg of crude extract per ml of phosphate buffered saline caused paralysis leading to death taking 4.02-4.20, 3.05-3.75 and 2.05-2.83 h respectively. Scanning electron microscopic observations on treated worms revealed deformation of surface architecture, particularly in scolex and surface microtriches. Severe distortion and disorganization of the tegumental and subtegumental layer along with cytoplasmic organelle was also observed under transmission electron microscope. The possible use of the plant as a potential anthelmintic against cestode parasite is discussed.