Recovery of second-order optical nonlinearity in annealedproton-exchanged LiNbOx

The second-order nonlinear coefficients measured in proton-exchanged LiNbO₃ as a function of annealing time are discussed. Measurements of reflected second-harmonic power indicate that the second-order nonlinear coefficient d₃₃ is reduced to 60% of the bulk value as a result of proton exchange in pure benzoic acid. It is also shown that annealing restores the d-coefficients to almost the original value of the virgin crystal. For example, recovery to ~90% of the bulk value was obtained for a sample with a 0.3-μm-bulk proton-exchanged layer, annealed for 10 h at 350°C     

Tunnel diode-loaded rectangular microstrip antenna for millimeter range

Theoretical investigations conducted for Ge tunnel diode-integrated rectangular patch antenna reveals that such an antenna exhibits frequency tunability with the bias voltage. The Ge tunnel diode-loaded patch can be operated in the millimeter range (51.042-54.013 GHz). The range of frequency obtainable for operation is 2971 MHz. The radiation pattern shows variation with the bias voltage and the radiated power, the beamwidth and the directivity vary inversely with the bias voltage. Thus, the Ge tunnel diode-loaded patch can be used to achieve electronic tuning (BW=5.66%) with the bias voltage.     

A Novel FRFT Beamformer for Rayleigh Faded Channels

A method of optimal beamforming for flat Rayleigh faded channels using the Fractional Fourier Transform (FRFT) is considered in this paper. It has been demonstrated through simulations that optimal beamforming with FRFT allows smaller mean-square errors in restoring signals degraded with linear time-or frequency variant distortions and Additive White Gaussian Noise. This is made possible by the additional flexibility that comes with free parameter ‘a’ of the fractional Fourier transform as oppose to the classical Fourier transform (FT). The method is especially useful in moving source problems, where Doppler Effect produces frequency shift when the source is moving, as in mobile and wireless communication where user produces the frequency shift while moving. In this paper it is shown through simulations that beamforming in fractional domain reduces BER as compared to time or frequency domain.     

Two-stage decision making policy for opportunistic spectrum access and validation on USRP testbed

“Recently, various paradigms, for instance, device-to-device communications, LTE-unlicensed and cognitive radio based on an opportunistic spectrum access (OSA) are being envisioned to improve the average spectrum utilization. In OSA, secondary (unlicensed) users (SUs) need decision making policies (DMPs) to identify and transmit over optimum frequency bands without any interference to the primary (licensed) users as well as minimize the number of collisions among SUs. In this paper, we have proposed a two-stage DMP consisting of Bayesian Multi-armed Bandit algorithm to accurately characterize the frequency band statistics independently at each SU and frequency band selection scheme for orthogonalization of SUs. The analytical and simulation results show that the proposed DMP leads to 45% improvement in the average spectrum utilization compared to 36–39% in the existing DMPs. Furthermore, the number of collisions are 58.5% lower in the proposed DMP making SU terminals energy-efficient. The performance of the proposed DMP has been verified on the proposed USRP testbed in real radio environment and the experimental results closely match the simulated results .”     

FGMOS transistor based low voltage and low power fully programmable Gaussian function generator

In this paper floating gate MOS (FGMOS) transistor based fully programmable Gaussian function generator (GFG) is presented. The circuit combines the exponential characteristics of MOS transistor in weak inversion, tunable property of FGMOS transistor, and its square law characteristic in strong inversion region to implement the GFG. FGMOS based squarer is the core sub circuit of GFG that helps to implement full Gaussian function for positive as well as negative half of the input voltage. FGMOS implementation of the circuit provides low voltage operation, low power consumption, reduces the circuit complexity and increases the tunability of the circuit. The performance of circuit is verified at 0.75 V in TSMC 0.18 μm CMOS, BSIM3 and level 49 technology by using Cadence Spectre simulator. To ensure robustness of the proposed GFG, simulation results for various process corner variations have also been included.     

Water-table variation in a sloping aquifer due to random recharge

Variation in the level of the water table is closely linked with recharge. Therefore, any uncertainty associated with the recharge rate is bound to affect the nature of the water-table fluctuation. In this note, a ditch-drainage problem of a sloping aquifer is considered to investigate the effect of uncertainty in the recharge rate on water-table fluctuation. The rate of recharge is taken as an exponentially decaying function with its decay constant as a Gaussian random variable. Expressions for the first two moments of the water-table height, i.e. mean and standard deviation, are presented. By using these expressions, the effect of uncertainty in the recharge rate on the water-table fluctuation has been analyzed with the help of a numerical example.     

Past developments and future trends in the rotary or orbital forging process

Rotary forging is a relatively new manufacturing process with potential for cost-effective applications, especially in cold forging of intricate parts to net shape. In this paper orbital forging and axial die rolling processes are included as subsets of rotary forging while radial forging, also known as rotary forging, has been excluded; these decisions are primarily based on die kinematics. Because of its recent origins, the rotary forging process is first described. Then, a historical perspective is provided to trace its recent origins. The machines are classified based on die kinematics. Die kinematics influence the stick-slip or position discrepancy behavior of the different machine types and have deep implications on the die filling and accuracy capabilities of these machines. Rotary forging machines currently in operation in the U.S. and their applications are presented in greater detail. The discussion on future applications and potential research issues is primary based on the author’s own perception of future trends in this emerging field. The author is with.     

Characteristics of forming presses and recent developments for precision and net shape forming

The trend in metal forming is to produce parts with increased precision and geometric complexity. Thus, research and development is being conducted worldwide to develop presses and tooling for near-net and net shape forming of difficult-to-form components. As a result, presses with increased precision and multi-action tooling are being used routinely by advanced companies around the world. This paper will discuss the interactions between press characteristics and part production in precision forming and review some of the new press and tooling designs recently developed by various domestic and foreign manufacturers.     

Property of Self-Similarity Between Baseband and Modulated Signals

Mobile Networks and Applications - The increment of communication technologies and the development of signal processing require efficient identification techniques for communication...     

Multi-User Relaying of High-Rate Space–Time Code in Cooperative Networks

In this paper, we propose high-rate space–time coding for cooperative wireless networks to reduce the overall delay incurred in relaying signals to multiple receivers. The relay structure is optimized in order to achieve maximum SNR at the receiver nodes. The proposed scheme provides a significant reduction in the delay required for the relaying and transmission of the signals to the multiple receivers with a minute loss in performance. We have also shown by simulation that this loss in the performance could be recovered by selecting more number of relays. We propose two relaying strategies for high-rate space–time codes, which are very useful in providing high data-rate in wireless cooperative networks.