On the detection of Cardiac Arrhythmia with Principal Component Analysis

Wireless Personal Communications - The Electrocardiogram (ECG) signal is used to record the electrical activity of heart. The subtle variations in ECG attributes are used by cardiologists for...     

Nework topology for maximizing the terminal reliability in a Computer Communication Network

In the design of a Computer Communication Network (CCN), the reliability between any pair of nodes and the maximum permissible installation cost are of great importance. These characteristics are largely dependant upon the topological layout of the links, their costs and reliabilities. Having the knowledge of the topological layout of the various computer centres (nodes) and maximum permissible cost of installing the various links at their pre-assigned positions; in this paper an algorithm for obtaining an optimal network topology which gives the maximum s?t reliability is presented. The developed method is general and is computerized. The proposed method has an additional advantage that the system is not to be redesigned, if at a later stage the permissible cost is enhanced by budgetary provisions. An example illustrates the algorithm.     

Grain growth of high Tc YBa2Cu3O7−x

Grain growth during sintering of the polycrystalline high onset temperature superconductor YBa₂Cu₃O_7−x has been examined by measuring grain sizes at various temperatures for different times above 900°C. The grain size distribution is found to be predominately lognormal after some sintering time. The mean grain size increases with both temperature and time. The standard deviation of the grain size distribution increases with temperature, but appears to be independent of time. The grain growth law may have an exponent of five. The grain growth rate may be affected by the grain size of the calcined powder.     

Analysis of energy saving in user equipment in LTE-A using stochastic modelling

Telecommunication Systems - Energy saving in User Equipment (UE) is one of the important issues for limited sources of power in the device. It is critical for the UE to maximize its energy...     

Performance analysis of a variable‐gain amplify‐and‐forward relayed mixed RF‐FSO system

In this work, an amplify‐and‐forward variable‐gain relayed mixed RF‐FSO system is studied. The considered dual‐hop system consists of a radio frequency (RF) link followed by a free space optical (FSO) channel. The RF link is affected by short‐term multipath fading and long‐term shadowing effects and is assumed to follow the generalized‐K fading distribution that approximates accurately several important distributions often used to model communication channels. The FSO channel experiences fading caused by atmospheric turbulence that is modeled by the gamma‐gamma distribution characterizing moderate and strong turbulence conditions. The FSO channel also suffers path loss and pointing error induced misalignment fading. The performance of the considered system is analyzed under the collective influence of distribution shaping parameters, pointing errors that result in misalignment fading, atmospheric turbulence, and path loss. The moment‐generating function of the Signal power to noise power ratio measured end‐to‐end for this system is derived. The cumulative distribution function for the Signal power to noise power ratio present between the source and destination receiver is also evaluated. Further, we investigate the error and outage performance and the average channel capacity for this system. The analytical expressions in closed form for the outage probability, symbol and bit error rate considering different modulation schemes and channel capacity are also derived. The mathematical expressions obtained are also demonstrated by numerical plots.     

Reliability Evaluation by Network Decomposition

The method evaluates the reliability of large computer communication systems by systematic decomposition of the probabilistic graph of the system into two parts using an appropriate cutset. A technique is evolved for determining the conditional success events using both the node removal and connection multiplication methods for path enumeration. An example is solved to show the versatility of the method. The results of the example are verified by using an existing algorithm. The suggested method is general and computationally economical.     

Modification of cutsets for reliability evaluation of communication systems

A general and simple technique for the evaluation of symbolic reliability expression in the case of practical systems such as a communication system having fixed channel capacities of its various communicating links, a computer communication network allowing a fixed amount of data exchange amongst different terminals of various computer centres and a power distribution system having limited power ratings of its various power lines, is presented. A system is considered reliable only if it successfully transmits at least the required system capacity from the transmitter to the receiver station. In this method, the various branch sets are obtained which completely disrupt the communication path, i.e. ensure system failure. It is observed that these branch sets are not necessarily the cutsets in the usual graph theoretic sense. The unreliability expression is then determined by adopting an existing method for making various terms disjoint. Two typical examples are solved by this method. It is observed that the method is computationally fast and efficient.     

Moisture adsorption behaviour of esterified rubber wood (Hevea brasiliensis)

Hevea brasiliensis ) esterified with acetic anhydride, maleic anhydride and phthalic anhydride was studied for moisture adsorption behaviour. FTIR spectroscopic technique was used to analyse the chemical changes in the wood through the correspondent reactions. Spectra indicated increasing intensity of the C=O and C-O stretching bands, and reduction in O-H stretching vibrations that reflects formation of less hygroscopic ester bonds with hydroxyl groups of cell wall polymers. Moisture adsorption isotherms show low equilibrium moisture content in esterified wood at all relative humidity values as compared to a control. The adsorption data was analysed by applying Hailwood-Horrobin theory which separated the adsorbed water into hydrated water and dissolved water corresponding to mono-layer and multi-layer adsorption. Curve for M_h and M_s were similar in pattern for esterified wood and control with different magnitude. Low M_h and M_s in esterified wood indicate reduction in moisture adsorption sites. Inaccessible fraction of wood for water vapour was increased by 43%, 32% and 26% in acetic, maleic and phthalic anhydride treated wood, respectively, compared to the control. Acetic anhydride treatment was found most effective in reducing hygroscopicity of wood.

---

Hevea brasiliensis ) wurde verestert mit Anhydriden der Maleins?ure, Essigs?ure und Phtals?ure. Das Adsorptionsverhalten bei verschiedenen Feuchten wurde mit FTIR-Methoden untersucht, um die entsprechenden chemischen Abl?ufe zu erfassen. Intensivere C=O, und -C-O- Streckschwingungen sowie reduzierte OH-Schwingungen reflektieren die neu gebildeten, weniger hygroskopischen Esterbindungen. Bei allen modifizierten Proben ergaben sich niedrigere Gleichgewichtsfeuchten. Die Adsorptions-Isothermen wurden mit Hilfe der Hailwood-Horrobin Theorie analysiert, um adsorbiertes (M_h) und gel?stes (M_s) Wasser zu unterscheiden. Der Kurvenverlauf für M_h und M_s für modifiziertes und unbehandeltes Holz war qualitativ ?hnlich, und unterschied sich nur quantitativ. Geringe Werte für M_h und M_s zeigen eine Verringerung der m?glichen Adsorptionsstellen an. Der nicht zug?ngliche Anteil des Holzes, bezogen auf Kontrollproben, verringerte sich auf 43% (Acetanhydrid), 32% (Maleins?ureanhydrid) und 26% (Phthals?ureanhydrid). Acetanhydrid erwies sich als das effektivste Mittel, um die Hygroskopizit?t zu erniedrigen.

     

Mining associations with the collective strength approach

The large itemset model has been proposed in the literature for finding associations in a large database of sales transactions. A different method for evaluating and finding itemsets referred to as strongly collective itemsets is proposed. We propose a criterion stressing the importance of the actual correlation of the items with one another rather than their absolute level of presence. Previous techniques for finding correlated itemsets are not necessarily applicable to very large databases. We provide an algorithm which provides very good computational efficiency, while maintaining statistical robustness. The fact that this algorithm relies on relative measures rather than absolute measures such as support also implies that the method can be applied to find association rules in data sets in which items may appear in a sizeable percentage of the transactions (dense data sets), data sets in which the items have varying density, or even negative association rules     

Solar cell array parameters

A generalized method of combining non identical parameters like series and shunt resistance dependent photocurrents under open circuit conditions (I_phoa) and the loaded conditions (I_pha) have been deduced. It is found that in the case of series array, only I_pha is dependent upon shunt resistance, while in the case of parallel array both are dependent upon shunt resistance.