Novel method for removal of NO x and SO2 by sustainable electrochemical process using Ag(I)/Ag(II) redox mediator

The objective of this work was to develop a process for removal of industrial waste gases like NO, NO₂ and SO₂ by electrochemically generated Ag(I)/Ag(II) redox mediator system in aqueous nitric acid medium. 100% removal efficiencies were achieved in these studies for removal of NO _x and SO₂ with Ag(II) ions in room temperature and atmospheric pressure. This Ag(I)/Ag(II) redox mediator system can be regenerated continuously during the scrubbing process.     

Bio-Scaffolds as Cell or Exosome Carriers for Nerve Injury Repair

Central and peripheral nerve injuries can lead to permanent paralysis and organ dysfunction. In recent years, many cell and exosome implantation techniques have been developed in an attempt to restore function after nerve injury with promising but generally unsatisfactory clinical results. Clinical outcome may be enhanced by bio-scaffolds specifically fabricated to provide the appropriate three-dimensional (3D) conduit, growth-permissive substrate, and trophic factor support required for cell survival and regeneration. In rodents, these scaffolds have been shown to promote axonal regrowth and restore limb motor function following experimental spinal cord or sciatic nerve injury. Combining the appropriate cell/exosome and scaffold type may thus achieve tissue repair and regeneration with safety and efficacy sufficient for routine clinical application. In this review, we describe the efficacies of bio-scaffolds composed of various natural polysaccharides (alginate, chitin, chitosan, and hyaluronic acid), protein polymers (gelatin, collagen, silk fibroin, fibrin, and keratin), and self-assembling peptides for repair of nerve injury. In addition, we review the capacities of these constructs for supporting in vitro cell-adhesion, mechano-transduction, proliferation, and differentiation as well as the in vivo properties critical for a successful clinical outcome, including controlled degradation and re-absorption. Finally, we describe recent advances in 3D bio-printing for nerve regeneration.     

Two-step sintering technique for enhancing mechanical and oxygen permeation properties of dual-phase oxygen transport membranes

The present work involved the application of a two-step sintering (TSS) technique for typical Ce_0.9Gd_0.1O_2?δ–La_0.6Sr_0.4Co_0.2Fe_0.8O_3–δ (GDC–LSCF) composites and its effect on the microstructure and resultantly mechanical and O₂-permeating properties. The samples obtained by conventional sintering (CS) performed at 1100, 1250, and 1400 °C for 3 h exhibited maximum flexural strength and hardness values of 142 MPa and 8.71 GPa, respectively. However, the application of a TSS procedure produced fine-grained microstructures with improved mechanical properties. In particular, with the use of a typical 1250/1200 TSS protocol, increases of approximately 31 % and 7% in the flexural strength and hardness values, respectively, were observed compared to those obtained using the CS method. Moreover, thick-film (～ 60 μm) GDC–LSCF membrane prepared by tape casting and the TSS technique showed remarkably 1.5–2 times higher oxygen permeation flux than membrane sintered by CS method. The results are discussed and explained in detail.     

Solution combustion synthesis of layered LiNi0.5Mn0.5O2 and its characterization as cathode material for lithium-ion cells

LiNi_0.5Mn_0.5O₂, a promising cathode material for lithium-ion batteries, is synthesized by a novel solution-combustion procedure using acenaphthene as a fuel. The powder X-ray diffraction (XRD) pattern of the product shows a hexagonal cell with a = 2.8955 Å and c = 14.1484 Å. Electron microscopy investigations indicate that the particles are of sub-micrometer size. The product delivers an initial discharge capacity of 161 mAh g⁻¹ between 2.5 and 4.6 V at a 0.1 C rate and could be subjected to more than 50 cycles. The electrochemical activity is corroborated with cyclic voltammetric (CV) and electrochemical impedance data. The preparative procedure presents advantages such as a low cation mixing, sub-micron particles and phase purity.     

Dynamic simulation of air storage–based gas turbine plants

Cavern storage is a proven energy storage technology, capable of storing energy in the form of compressed air inside a cavern. The Huntorf plant and the Alabama plants use this technology to store electrical energy during the off‐peak load hours by compressing the air inside a cavern and then using this compressed air during gas turbine operation to generate electricity during peak load demand hours. The advantage of doing this is that it increases the efficiency of gas turbine operation while meeting the grid generation and the load balance. The operation of a typical compressed air energy storage (CAES)–based gas turbine plant involves the operation of several components, including the compressor, the cavern storage, the combustor, the turbine, and so on. The dynamics of the plant as a whole depends on the performance of the individual components. The focus of this article is to develop a Simulink‐based models for each of the individual components, which can then be assembled appropriately to design an entire CAES plant. As an illustration, a case study for the Huntorf CAES plant is presented with the developed models. A typical daily operation of the Huntorf plant is simulated and compared with the reported Huntorf plant data. The model accurately captures the reported dynamics of the cavern storage. In addition, the reported quantities like the compressor power consumption, the turbine power generation, and the temperature at different junctions of the CAES plant match well with the simulated results. Copyright © 2011 John Wiley & Sons, Ltd.     

Finite element based evaluation of stress intensity factors for interactive semi-elliptic surface cracks

A finite thickness plate with two coplanar self-same shallow and deep semi-elliptical surface cracks subjected to remote tensile surface traction is considered for fracture analysis. Based on three-dimensional (3D) finite element solutions, stress intensity factors (SIFs) are evaluated along the entire crack front using a force method. The line spring model has also been used to evaluate crack depth point SIFs using shell finite element analysis. A wide range of geometric dimensions and crack configurations viz. crack shape aspect ratio (0.3≤a/c≤1.2), crack depth ratio (1.25≤t/a≤6), relative crack location (0.33≤2c/d≤0.9) and normalized location on the crack front (0≤2φ/π≤2) are considered for numerical estimation of crack interaction factors. SIFs evaluated at the depth point using the force method from the 3D finite element results are compared with SIFs evaluated using the line spring model. Finally, using finite element results, an empirical relation is proposed for the evaluation of crack interaction factors. For the ranges considered, the proposed empirical relation predicts crack interaction factors at critical locations within ±2% of the 3D finite element solutions.     

Achieving Narrow FWHM and High EQE Over 38% in Blue OLEDs Using Rigid Heteroatom-Based Deep Blue TADF Sensitized Host

Simultaneously obtaining high efficiency and deep blue emission in organic light emitting diodes (OLEDs) remains a challenge. To overcome the demands associated with deep blue thermally activated delayed fluorescence (TADF) emitters, two deep blue TADF materials namely, DBA–BFICz and DBA–BTICz, are designed and synthesized by incorporating oxygen-bridged boron (DBA) acceptor with heteroatoms, oxygen and sulphur-based donors, BFICz and BTICz, respectively. Both TADF materials show deep blue photoluminescence emissions below 450 nm by enhancing the optical band gap over 2.8 eV through deeper highest occupied molecular orbital (HOMO) level of heteroatom based donor moieties. At the same time, the photoluminescence quantum yields (PLQYs) of both TADF materials remain over 94%. The TADF device with DBA–BFICz as an emitter exhibits a good external quantum efficiency (EQE) of 33.2%. Since both new TADF materials show deep blue emissions and high efficiencies, hyperfluorescence (HF) OLED devices are fabricated using ν-DABNA as a fluorescence dopant. DBA–BFICz as a TADF sensitized host in HF–OLED reveals an outstanding EQE of 38.8% along with narrow full width at half maximum of 19 nm in the bottom emission pure blue OLEDs. This study provides an approach to develop deep blue TADF emitters for highly efficient OLEDs.     

Electrochemical recovery of silver from waste aqueous Ag(I)/Ag(II) redox mediator solution used in mediated electro oxidation process

The paper presents a process for the electrochemical recovery of silver(Ag) by electro deposition on the electrode surface from the waste solutions of Ag(I)/Ag(II) redox system in nitric acid medium used for the mediated electrochemical process. Electrochemical recovery was carried out in an undivided cell with DSA-O₂ electrodes at room temperature condition. At an optimized current density of 12 A/dm², 99% of Ag recovery efficiency was achieved with high yield and low energy consumption. Experimental runs were made in order to observe the performance of the Ag recovery process. The operating conditions like current density, temperature and Ag(I) concentration of the electrolyte, the acid concentrations, agitation rate and inter-electrode distance were optimized.     

Molecular weight averages as criteria for quality assessment of heated oils and fats

A simple method for quality assessment of heated oils and fats is described. The proposed method involves precise determination of molecular weight averages (MWA)viz., the weight average molecular weight ( ), the number average molecular weight ( ) and the Z-average molecular weight ( ) by high performance size exclusion chromatography (HPSEC) and their quantitative correlation to percent polar material obtained by column chromatography (CC). Change in MWA on heat treatment of fourteen different edible oils and fats at 180° ± 2°C for eight 8-hr days is studied. Relative standard deviations and regression coefficients of correlation between MWA and their ratios ( , { }, { }, { }, { } and { )vs percent polar material have been reported. Probable discard time was predicted for all the oils based on the above-mentioned correlations and also from the percent of high molecular weight (H. Mwt) species formed. It was observed that the oils which are generally recommended for coronary patients deteriorated faster. A possibility of extending this methodology to the frying oils is suggested. Part of the work was presented at “40th Pittsburgh Conference on Analytical Chemistry and Applied Spectroscopy” at Georgia World Congress Centre, USA, 1989. IICT Communication No. 2630.     

Quantitative determination of castor oil in edible and heat-abused oils by13C nuclear magnetic resonance spectroscopy

Application of¹³C nuclear magnetic resonance (NMR) spectroscopy for detection of castor oil (CO) in various edible oils, such as coconut oil, palm oil, groundnut oil and mustard oil, is described. Characteristic signals observed at δ 132.4, δ 125.6, δ 71.3, δ 36.8 and δ 35.4 ppm, due to C10, C9, C12, C13 and C11 carbons of ricinoleic acid (RA) in CO, were selected for distinguishing it from edible oils. Quantitative¹³C NMR spectra of oils were recorded in CDCl₃ with a gated decoupling technique. The minimum detection limits for qualitative and quantitative analyses were 2.0 and 3.0%, respectively. The proposed method is simple, nondestructive and requires no sample pretreatment. Its application to heat-abused oils has also been demonstrated successfully without any of the interferences observed in most other methods.