Cocaine Induces Cytoskeletal Changes in Cardiac Myocytes: Implications for Cardiac Morphology

Cocaine is one of the most widely abused illicit drugs worldwide and has long been recognised as an agent of cardiac dysfunction in numerous cases of drug overdose. Cocaine has previously been shown to up-regulate cytoskeletal rearrangements and morphological changes in numerous tissues; however, previous literature observes such changes primarily in clinical case reports and addiction studies. An investigation into the fundamental cytoskeletal parameters of migration, adhesion and proliferation were studied to determine the cytoskeletal and cytotoxic basis of cocaine in cardiac cells. Treatment of cardiac myocytes with cocaine increased cell migration and adhesion (p < 0.05), with no effect on cell proliferation, except with higher doses eliciting (1–10 μg/mL) its diminution and increase in cell death. Cocaine downregulated phosphorylation of cofilin, decreased expression of adhesion modulators (integrin-β3) and increased expression of ezirin within three hours of 1 μg/mL treatments. These functional responses were associated with changes in cellular morphology, including alterations in membrane stability and a stellate-like phenotype with less compaction between cells. Higher dose treatments of cocaine (5–10 μg/mL) were associated with significant cardiomyocyte cell death (p < 0.05) and loss of cellular architecture. These results highlight the importance of cocaine in mediating cardiomyocyte function and cytotoxicity associated with the possible loss of intercellular contacts required to maintain normal cell viability, with implications for cardiotoxicity relating to hypertrophy and fibrogenesis.     

Graphene-Reinforced Aluminum Matrix Composites: A Review of Synthesis Methods and Properties

Graphene-reinforced aluminum (Gr-Al) matrix nanocomposites (NCs) have attracted strong interest from both research and industry in high-performance weight-sensitive applications. Due to the vastly different bonding characteristics of the Al matrix (metallic) and graphene (in-plane covalent?+?inter-plane van der Waals), the graphene phase has a general tendency to agglomerate and phase separate in the metal matrix, which is detrimental for the mechanical and chemical properties of the composite. Thus, synthesis of Gr-Al NCs is extremely challenging. This review summarizes the different methods available to synthesize Gr-Al NCs and the resulting properties achieved in these NCs. Understanding the effect of processing parameters on the realized properties opens up the possibility of tailoring the synthesis methods to achieve the desired properties for a given application.     

Effect of dynamic cross-linking on mixing torque behavior and tensile yield behavior of isotactic polypropylene (iPP) / ethylene-propylene diene rubber (EPDM) /nitrile rubber (NBR) elastomeric blends

The mixing torque behavior of ter blends of isotactic-polypropylene (iPP) with ethylene-propylene diene rubber (EPDM)/Nitrile rubber (NBR) was studied with the help of Rheometer using resole type phenolic resin as a cross-linking agents. Systematic changes with varying blend composition were observed in stress-strain behavior in the yield region viz., width of yield peak, work of yield, yield stress and yield strain. Analysis of yield stress data was made on the basis of various mathematical expressions of first power and two-thirds power laws of blend composition dependence and the porosity model. It led to consistent result from the expressions about the variation of stress concentration effect in both uncross-linked and cross-linked blend systems. With the aid of scanning electron microscopy (SEM) shapes and sizes of dispersed elastomer phase (EPDM / NBR) domains at varying blend compositions were studied.     

Machinability Study of Stir Cast Hypoeutectic Aluminum-Silicon Alloys During Turning

The influence of Be and Cd (iron correctors) on mechanical properties and machining behavior of hypoeutectic Al-Si alloy (Al-7Si-0.5Mg-1.2Fe) processed by conventional and semi-solid metal (SSM) processing (stir casting) techniques is investigated. The alloys under investigation were prepared by controlling melt in an induction melting furnace. The stirring of SSM was carried out at a constant stirring speed of 400 rpm under constant cooling conditions from liquidus temperature. The turning operations were carried out under dry conditions on a CNC turning center using coated-carbide insert by varying cutting speed, feed rate, depth of cut, and approaching angle. An orthogonal array, the signal-to-noise ratio, and analysis of variance were employed to study the machining performance characteristics. The results indicate that Be/Cd modification of the alloy and selected cutting parameters significantly affect the machining characteristics. The feed rate, cutting speed, and Cd as an iron corrector have more effect on the machining behavior of the alloys under study.     

Physicochemical characterization of alloy of polyimide with varying degree of crosslinking through diisocyanates

Polyimide alloys are prepared by blending the crosslinked and uncrosslinked polyamic acid components and followed by thermal imidization. The blend components can be synthesized by the reaction of polyamic acid with the varying concentration of crosslinker [here methylene bis (4-phenyl isocyanate or MDI)] from 1.54 × 10^?2 mol/L (i.e. hypothetically calculated critical crosslinker concentration or CCC) to 1.54 × 10^?6 mol/L. This communication discusses the synthesis and characterization of polyimide (PI) blends and alloys prepared by varying degrees of crosslinking introduced via isocyanate-amic acid reaction. The polyimides were prepared by thermally imidizing the polyamic acid blends at different curing temperatures from 50°C to 350°C. The degree of imidization and residual solvent content for blends having varying mole fractions of crosslinked (or branched) and uncrosslinked components and two extreme conditions and at specified temperature-time profiles have been studied. The resultant PI-MDI blends have exhibited synergism on mechanical properties. The improvement in mechanical properties, however, was significantly higher at the lower imidization temperature (i.e. 50°C to 150°C). The feasibility of preparing polyimide alloys with synergistic combinations of crosslinked and uncrosslinked polyimide components was inferred.     

Modelling of the disulphide-swapped isomer of human insulin-like growth factor-1: implications for receptor binding

Insulin-like growth factor-1 (IGF-1) is a serum protein whichunexpectedly folds to yield two stable tertiary structures withdifferent disulphide connectivities; native IGF-1 [18–61,6–48,47–52]and IGF-1 swap [18–61,6–47, 48–52]. Here we demonstratein detail the biological properties of recombinant human nativeIGF-1 and IGF-1 swap secreted from Saccharomyces cerevisiae.IGF-1 swap had a ~30 fold loss in affinity for the IGF-1 receptoroverexpressed on BHK cells compared with native IGF-1.The parallelincrease in dose required to induce negative cooperativity togetherwith the parallel loss in mitogenicity in NIH 3T3 cells impliesthat disruption of the IGF-1 receptor binding interaction ratherthan restriction of a post-binding conformational change isresponsible for the reduction in biological activity of IGF-1swap. Interestingly, the affinity of IGF-1 swap for the insulinreceptor was ~200 fold lower than that of native IGF-1 indicatingthat the binding surface complementary to the insulin receptor(or the ability to attain it) is disturbed to a greater extentthan that to the IGF-1 receptor. A 1.0 ns high-temperature moleculardynamics study of the local energy landscape of IGF-1 swap resultedin uncoiling of the first A-region -helix and a rearrangementin the relative orientation of the A- and B-regions. The modelof IGF-1 swap is structurally homologous to the NMR structureof insulin swap and CD spectra consistent with the model arepresented. However, in the model of IGF-1 swap the C-regionhas filled the space where the first A-region -helix has uncoiledand this may be hindering interaction of Val44 with the secondinsulin receptor binding pocket.     

Evaluation of the performance of a multi-fuel domestic boiler with respect to the existing European standard and quality labels: Part-1

Emissions from a multi-fuel domestic boiler (40 kW), fired with nine different agro-biomass pellets have been compared. The pellets include apple pomace (Malus domestica), reed canary grass (Phalaris arundinacea), pectin waste from citrus shells (Citrus reticulata), sunflower husk (Helianthus annuus), peat, two types of straw pellets and two types of wood pellets. The measurements of emissions comprised carbon monoxide (CO), nitrogen oxides (NO_x), unburned hydrocarbons (C_xH_y), sulphur oxides (SO_x) and flue dust mass concentration (by DINplus and isokinetic sampling methods). Comparison of experimental emission values with relevant quality labels (Blue Angel and Swan Mark) and standard (EN-303-5) showed that the boiler satisfied the emissions requirements of Blue Angel, Swan Mark and EN-303-5 when using wood pellets-1 (except CO emission), reed canary grass and citrus pectin waste pellets as fuel at nominal load. The wood pellets-1 yielded the highest boiler efficiency of 92.4%. Dusts emission varied as a function of fine content and elemental constituent of the pellets and was the highest with sunflower husk. CO and C_xH_y emissions were maximum with peat pellets. NO_x emissions were below the concerned permissible values with all experimental pellets. Emissions of NO_x and SO_x were found maximum with straw pellets.For agro-pellets, statistical differences in ash contents were significant. High ash contents and low ash melting temperature made straw pellets less suitable for domestic applications. Reed canary grass, citrus pectin and apple pellets were the most suitable agro-pellets for small scale boilers with reasonable less ash contents and less emissions as compared to others.     

Semi-empirical modeling of electrical conductivity for composite bipolar plate with multiple reinforcements

Carbon composite bipolar plates were developed by compression molding of novolac type phenol formaldehyde resin with natural graphite, carbon black, and carbon fiber. The General Effective Media equation was adapted to model the electrical conductivity of the bipolar plate. The experimental values of the electrical conductivity of the composites with different reinforcements were well predicted by the model. For resin-graphite system (2-component), the most effective in-plane and through-plane electrical conductivities for 70% graphite content were found to be 201.26 and 40.91 S cm⁻¹, respectively. Similarly, for optimum resin-graphite-carbon black system (3-component), these values were found as 269.55 and 82.77 S cm⁻¹, respectively. The most effective in-plane and through-plane electrical conductivities were found to be 285.54 and 91.79 S cm⁻¹, respectively, for the composite with resin-graphite-carbon black-carbon fiber system (4-component). The predicted electrical conductivities for all the three systems were found to be in well agreement with the experimental values.     

Reduction of cresolase and catecholase activities in tubers of some Indian potato varieties by the application of potash fertilisers

Cresolase and catecholase activities were determined in tubers of four potato (Solanum tuberosum L) varieties (Kufri Chamatkar, Kufri Chandramukhi, Kufri Sindhuri and C-2703) fertilised with three levels (0, 120, 240 kg K₂O ha^?1) of either muriate or sulphate of potash. The enzyme activities were also determined separately in the peel and flesh tissues of the tubers of Kufri Chamatkar and C-2703. Differences were observed in the activities between varieties, with highest specific activities in the tubers of Kufri Chamatkar. Peels of both the varieties showed higher cresolase and catecholase activities than the flesh tissue. Application of potassic fertilisers caused a reduction in both the activities in the tuber, peel and flesh tissue. Greater reduction in activities was caused by application of muriate of potash than with the sulphate form.     

Efficient composite bipolar plate reinforced with carbon fiber and graphene for proton exchange membrane fuel cell

The composite bipolar plates are developed using natural graphite, carbon black, and carbon fiber, along with 1% graphene with phenol formaldehyde (resole) resin. The graphene is developed by thermo-chemical exfoliation of natural graphite and characterized by XRD, Raman, FESEM, and AFM analyses. The synthesized graphene is monolayer graphene with a minimum thickness of 1 Å. The bipolar plates are developed using compression molding technique and thoroughly characterized considering stringent benchmarks (US-DOE and Plug Power Inc.) for PEMFC viz., electrical conductivity, flexural strength, deflection at mid-point, and corrosion current density. The composite bipolar plate showed excellent corrosion resistance to the rigorous fuel cell environment. All the required properties are achieved by the developed composite bipolar plate for PEMFC application. The fuel cell is fabricated with the developed bipolar plate and the performance of the fuel cell is studied. The incorporation of graphene has improved the fuel cell performance significantly.