Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM

This paper is dealing with the influence of processing parameters for manufacturing of steel–carbon-fiber-reinforced-plastic (CFRP) hybrid plates by using the one-shot-hybrid resin-transfer-moulding (OSH-RTM) process. A design of experiments study was carried out. The quality of the manufactured parts was quantified by the bending modulus, the apparent interlaminar shear strength (ILSS), the maximum deflection and the density of the CFRP. The following changeable processing parameters were chosen: mould temperature, resin temperature, change in mass flow and maximum injection pressure. It is shown that the mould temperature and the change in mass flow show significant impact on the flexural modulus, density and maximum deflection of the plate while there is no significant impact on the apparent ILSS. Furthermore, the interaction between the mould temperature and resin temperature is having an influence on the flexural modulus and density.     

Electrochemical studies of carbon-rich polymer-derived SiCN ceramics as anode materials for lithium-ion batteries

The electrochemical behavior of poly(phenylvinylsilylcarbodiimide)-derived SiCN ceramics as anode material for lithium-ion batteries is reported here for the first time. The novel carbon-rich silicon carbonitride (SiCN) ceramics have been synthesized by the thermal treatment of poly(phenylvinylsilylcarbodiimide) under argon atmosphere at five temperatures, namely 1100, 1300, 1500, 1700 and 2000 °C. The SiCN electrodes were prepared without any conducting additives and were tested in electrochemical two electrodes cell using cyclic voltammetry and galvanostatic techniques. The capacity of the carbon-rich SiCN samples was found to be stable upon galvanostatic cycling and reaches almost 300 mAh/g for the sample prepared at 1300 °C with oxygen as the impurity. The dependence of the microstructure, especially of the crystallinity of the segregated carbon phase and of the oxygen impurities on the electrochemical behavior of the SiCN material, was analysed. At all temperatures of thermolysis, the free carbon phase has been identified as “soft carbon”.     

Polymer-Derived SiOC/ZrO2 Ceramic Nanocomposites with Excellent High-Temperature Stability

Polymer-derived SiOC/ZrO₂ ceramic nanocomposites have been prepared using two synthetic approaches. A commercially available polymethylsilsesquioxane (MK Belsil PMS) was filled with nanocrystalline zirconia particles in the first approach. The second method involved the addition of zirconium tetra( n -propoxide), Zr(OⁿPr)₄, as zirconia precursor to polysilsesquioxane. The prepared materials have been subsequently cross-linked and pyrolyzed at 1100°C in argon atmosphere to provide SiOC/ZrO₂ ceramics. The obtained SiOC/ZrO₂ materials were characterized by means of X-ray diffraction, elemental analysis, Raman spectroscopy as well as transmission electron microscopy. Furthermore, annealing experiments at temperatures from 1300° to 1600°C have been performed. The annealing experiments revealed that the incorporation of ZrO₂ into the SiOC matrix remarkably increases the thermal stability of the composites with respect to crystallization and decomposition at temperatures exceeding 1300°C. The results obtained within this study emphasize the enormous potential of polymer-derived SiOC/ZrO₂ composites for high-temperature applications.     

Influence of pressure and dwell time on pressure-assisted sintering of calcium cobaltite

Calcium cobaltite Ca₃Co₄O₉, abbreviated Co349, is a promising thermoelectric material for high-temperature applications in air. Its anisotropic properties can be assigned to polycrystalline parts by texturing. Tape casting and pressure-assisted sintering (PAS) are a possible future way for a cost-effective mass-production of thermoelectric generators. This study examines the influence of pressure and dwell time during PAS at 900°C of tape-cast Co349 on texture and thermoelectric properties. Tape casting aligns lentoid Co349. PAS results in a textured Co349 microstructure with the thermoelectrically favorable ab-direction perpendicular to the pressing direction. By pressure variation during sintering, the microstructure of Co349 can be tailored either toward a maximum figure of merit as required for energy harvesting or toward a maximum power factor as required for energy harvesting. Moderate pressure of 2.5 MPa results in 25% porosity and a textured microstructure with a figure of merit of 0.13 at 700°C, two times higher than the dry-pressed, pressureless-sintered reference. A pressure of 7.5 MPa leads to 94% density and a high power factor of 326 µW/mK² at 800°C, which is 11 times higher than the dry-pressed reference (30 MPa) from the same powder.     

Kidney Injury Caused by Preeclamptic Pregnancy Recovers Postpartum in a Transgenic Rat Model

Preeclampsia (PE) is characterized by the onset of hypertension (≥140/90 mmHg) and presence of proteinuria (>300 mg/L/24 h urine) or other maternal organ dysfunctions. During human PE, renal injuries have been observed. Some studies suggest that women with PE diagnosis have an increased risk to develop renal diseases later in life. However, in human studies PE as a single cause of this development cannot be investigated. Here, we aimed to investigate the effect of PE on postpartum renal damage in an established transgenic PE rat model. Female rats harboring the human-angiotensinogen gene develop a preeclamptic phenotype after mating with male rats harboring the human-renin gene, but are normotensive before and after pregnancy. During pregnancy PE rats developed mild tubular and glomerular changes assessed by histologic analysis, increased gene expression of renal damage markers such as kidney injury marker 1 and connective-tissue growth factor, and albuminuria compared to female wild-type rats (WT). However, four weeks postpartum, most PE-related renal pathologies were absent, including albuminuria and elevated biomarker expression. Only mild enlargement of the glomerular tuft could be detected. Overall, the glomerular and tubular function were affected during pregnancy in the transgenic PE rat. However, almost all these pathologies observed during PE recovered postpartum.     

Impact of DICER1 and DROSHA on the Angiogenic Capacity of Human Endothelial Cells

RNAi-mediated knockdown of DICER1 and DROSHA, enzymes critically involved in miRNA biogenesis, has been postulated to affect the homeostasis and the angiogenic capacity of human endothelial cells. To re-evaluate this issue, we reduced the expression of DICER1 or DROSHA by RNAi-mediated knockdown and subsequently investigated the effect of these interventions on the angiogenic capacity of human umbilical vein endothelial cells (HUVEC) in vitro (proliferation, migration, tube formation, endothelial cell spheroid sprouting) and in a HUVEC xenograft assay in immune incompetent NSG^TM mice in vivo. In contrast to previous reports, neither knockdown of DICER1 nor knockdown of DROSHA profoundly affected migration or tube formation of HUVEC or the angiogenic capacity of HUVEC in vivo. Furthermore, knockdown of DICER1 and the combined knockdown of DICER1 and DROSHA tended to increase VEGF-induced BrdU incorporation and induced angiogenic sprouting from HUVEC spheroids. Consistent with these observations, global proteomic analyses showed that knockdown of DICER1 or DROSHA only moderately altered HUVEC protein expression profiles but additively reduced, for example, expression of the angiogenesis inhibitor thrombospondin-1. In conclusion, global reduction of miRNA biogenesis by knockdown of DICER1 or DROSHA does not inhibit the angiogenic capacity of HUVEC. Further studies are therefore needed to elucidate the influence of these enzymes in the context of human endothelial cell-related angiogenesis.     

Detecting landscape forms using Fourier transformation and singular value decomposition (SVD)

Landscape structure is a main determinant of ecological landscape potentials. The basic differentiation of relief into depressions and elevations at deliberately chosen scales can be managed comfortably by the Fourier transformation. The automated extraction of these structures from an elevation map using Fourier transformation or singular value decomposition can help to overcome complicated and errorprone procedures based on the determination of numerical structure parameters such as slope and aspect. The combination of automated extraction methods and moving window technology can lead to further, more integrated insights related to complex landscape patterns.