Influence of Temperature and Time of Post-weld Heat Treatment on Stress Relief in an 800-mm-Thick Steel Weldment

Ferritic steel weldments are invariably post-weld heat treated for relieving the residual stresses. However, the long duration of post-weld heat treatment (PWHT) required for very thick weldments can adversely affect the mechanical properties and fracture toughness. Thus, there is a need to establish the relative importance of temperature and time of PWHT with respect to stress relief. Accordingly, in the present work, the phenomenon of stress relief (due to PWHT) in an 800-mm-thick steel weldment was investigated using finite element analysis and the results were validated against experimental measurements. An analytical study was also carried out to determine the relative influence of temperature and time of PWHT on stress relief. It was found that time of PWHT plays a more significant role in case of relatively lower PWHT temperatures. It was also found that, for a given value of Hollomon parameter, different combinations of PWHT temperature and time can be employed to achieve the same level of stress relief. A mathematical relationship has been established between Hollomon parameter and magnitude of residual stress after PWHT. It has been shown that residual stress is a monotonically decreasing function of the Hollomon parameter.     

Component-based technique for determining the effects of acupuncture for fighting migraine using SPECT images

In this work, SPECT brain images are analyzed automatically in order to determine the effects of acupuncture applied for fighting migraine. For this purpose, two different groups of patients are randomly collected and received verum and sham acupuncture, respectively. Changes in the brain perfusion patterns can be measured quantitatively by dealing with the images in a classification context. A classification scheme consisting of a component-based feature extraction technique in combination with Support Vector Machines allows us to accurately determine the regions of interest (ROIs) where acupuncture produced more intense effects, and whether these effects are correlated with a decrease or an increase of the brain activity. Effects produced by verum and sham acupuncture are studied, and the best method for intensity normalization is discussed. The result is a complete, objective system which can be used for general purposes in the visual assessment of perfusion images.     

A study of external mass transfer effect on biodegradation of phenol using low‐density polyethylene immobilized Bacillus flexus GS1 IIT (BHU) in a packed bed bioreactor

The impact of external mass transport on the biodegradation rate of phenol in a packed bed bioreactor (PBBR) was studied. A potential bacterial species, Bacillus flexus GS1 IIT (BHU), was isolated from the petroleum‐contaminated soil. Low‐density polyethylene (LDPE) immobilized with the B. flexus GS1 IIT (BHU) was used as packing material in the PBBR. The PBBR was operated by varying the inlet feed flow rate from 4 to 10 mL/min, and the corresponding degradation rate coefficients were found to be in the range of 0.119–0.157 L/g h. In addition, the highest removal rate of phenol was obtained to be 1.305 mg/g h at an inlet feed rate of 10 mL/min. The external mass transfer was studied using the model . A new empirical correlation for the biodegradation of phenol in the PBBR was developed after the evaluation at various values of K and n.     

Feature Selection for Recognition of Online Handwritten Bangla Characters

Feature selection through optimization techniques provides an interesting approach to minimize computational time with enhanced prediction capability, and     

Simulations and Experiments of Hot Forging Design and Evaluation of the Aircraft Landing Gear Barrel Al Alloy Structure

In the present study, the hot forging design of a typical landing gear barrel was evolved using finite element simulations and validated with experiments. A DEFORM^3D software was used to evolve the forging steps to obtain the sound quality part free of defects with minimum press force requirements. The hot forging trial of a barrel structure was carried out in a 30 MN hydraulic press based on the simulation outputs. The tensile properties of the part were evaluated by taking samples from all three orientations (longitudinal, long transverse, short transverse). The hardness and microstructure of the part were also investigated. To study the soundness of the product, fluorescent penetrant inspection and ultrasonic testing were performed in order to identify any potential surface or internal defects in the part. From experiments, it was found that the part was formed successfully without any forging defects such as under filling, laps, or folds that validated the effectiveness of the process simulation. The tensile properties of the part were well above the specification limit (>10%) and the properties variation with respect to the orientation was less than 2.5%. The part has qualified the surface defects level of Mil Std 1907 Grade C and the internal defects level of AMS 2630 Class A (2 mm FBh). The microstructure shows mean grain length and width of 167 and 66 µm in the longitudinal direction. However, microstructure results revealed that the coarse grain structure was observed on the flat surface near the lug region due to the dead zone formation. An innovative and simple method of milling the surface layer after each pressing operation was applied to solve the problem of the surface coarse grain structure.     

Effect of bacterial inoculum ratio in mixed culture for decolourization and detoxification of pulp paper mill effluent

BACKGROUND: Effluent released from industry is a mixture of various pollutants. For the degradation of complex pollutants, mixed bacterial cultures can be more effective than a single culture. This study investigated the balance of bacterial populations in a mixed culture for maximum reduction of pollutants. RESULTS: This study deals with the degradation and detoxification of pulp paper mill effluent (PPME) by three bacterial strains, i.e. Serratia marcescens, Serratia liquefaciens and Bacillus cereus in different ratios, and found that two ratios, 4:1:1 and 1:4:1, were effective for the degradation of PPME. These ratios reduced the various pollution parameters. Enzyme bioassay revealed that more enzyme was produced during degradation for the ratio 4:1:1. High performance liquid chromatography (HPLC) analysis showed that the ratio 4:1:1 degraded 95% of lignin and related compounds, and chlorophenols up to 98%, whereas ratio 1:4:1 reduced lignin by 84% and chlorophenols by 58% after 7 days incubation. Degradation products were confirmed by gas chromatography–mass spectrometry (GC‐MS) analysis. A seed germination bioassay on Phaseolous mungo L. revealed that toxicity was reduced by the ratio 4:1:1. CONCLUSION: Due to variable potential of different bacteria show variation in their growth pattern at any contaminated site. This study shows that an appropriate ratio of mixed cultures is required for maximum degradation and detoxification of PPME. Copyright © 2012 Society of Chemical Industry     

Singly ionized double-donor complex in vertically coupled quantum dots

ABSTRACT: The electronic states of a singly ionized on-axis double-donor complex (D2+) confined in two identical vertically coupled, axially symmetrical quantum dots in a threading magnetic field are calculated. The solutions of the Schrodinger equation are obtained by a variational separation of variables in the adiabatic limit. Numerical results are shown for bonding and antibonding lowest-lying artificial molecule states corresponding to different quantum dot morphologies, dimensions, separation between them, thicknesses of the wetting layers, and magnetic field strength.     

Distributed resource allocation in cognitive radio networks with a game learning approach to improve aggregate system capacity

This paper presents a game theoretic solution for joint channel allocation and power control in cognitive radio networks analyzed under the physical interference model. The objective is to find a distributed solution that maximizes the network utility, defined with different criteria, with limited information. The problem is addressed through a non-cooperative game based on local information. Although the existence of a pure Nash Equilibrium cannot be assured for this game, simulation results show that it exists with high probability and with a performance similar to that of a potential game, where each player requires overall network information. The obtained results are compared with a centralized heuristic genetic algorithm to show the correctness of the proposals. From this point, utility functions for the local game are modified to restrict the transmitted power to drive the solution to a more cooperative approach. To overcome the convergence limitations of the local game, no-regret learning algorithms are used to perform the joint channel and power allocation. These algorithms provide stable mixed strategies in any scenario with even better global performance. This opens an interesting perspective to develop realistic protocols based on the modeled interactions and increases the adaptability to perform efficient opportunistic spectrum access.