Estimation of wind power availability in Tamil Nadu

Eleven years' daily wind speed data at 21 locations in the state of Tamil Nadu, India were analysed to assess the available wind power potential using Weibull distribution under two different methods. The mean wind speed varied from 1.0 to 5.0 m/s dividing the state into four regions. Judged by mean and standard deviation of available wind power, six locations have been identified as possible sites for a wind energy system.     

Abdominal tuberculosis: a presumptive diagnosis

BACKGROUND: Abdominal tuberculosis (TB) is common. But the diagnosis of abdominal TB is fraught with difficulties as it is often not possible to get a microbiological confirmation of the infection. We therefore undertook this study to highlight those pertinent clinical and laboratory features which would enable one to make a provisional diagnosis of abdominal TB early, to pave way for a trial of anti-tuberculosis chemotherapy. METHOD: This is a retrospective study of 12 patients treated for abdominal TB in our department over a period of 2 years. FINDINGS: Seven of the patients suffered from chronic diarrhoea for periods ranging from 4 weeks to 12 months. Four patients had progressive abdominal distension (ascites). The last patient came in with multiple abdominal swellings. Seven patients had clinical and biochemical features of malabsorption. Another 9 patients also had persistent pyrexia. The ascitic fluid was exudative in the 4 patients mentioned earlier. A definitive diagnosis could not be established in any of these patients. The diagnosis of abdominal TB was thus one of exclusion in these patients who showed prompt response to anti-tuberculosis therapy. CONCLUSION: Our study justifies a trial of anti-TB chemotherapy in TB endemic areas in the following clinical situations: (a) patients with chronic diarrhoea of unknown aetiology and (b) patients with exudative ascitic fluid, after all other possible causes, have been excluded. A prompt response to anti-TB therapy should be accepted as sufficient ground for the diagnosis of abdominal TB even when histopathological or microbiological confirmation of the disease is not possible. Our study reflects the experience of other workers from Third World countries.     

Thermopower of YBa2Cu3O7-δ–Ag Composites

The percolation behavior of normal-state thermopower, resistivity, and superconductivity have been studied in YBa₂Cu₃O_7-δ─Ag (YBCO─Ag) composite systems. The normal-state resistivity and thermopower show a percolation threshold at a Ag volume fraction ( V _Ag) of 20% to 30%, whereas the superconducting network shows a threshold at a V _Ag of ≅70% to 80%. The results obtained from this study show that the YBCO─Ag composite obtained from Ag₂O and YBCO powders is uniformly distributed with Ag and YBCO remaining as separate phases without changing their characteristics. The measurements of thermopower indicate that the normal-state thermopower and phonon-drag thermopower are affected by the Ag addition. The stability of YBCO is increased when it is in composite form.     

Effects of pyruvate on lipid oxidation and ground beef color

Our overall objective was to better understand the effects of added pyruvate on enhanced beef color stability. The 2 possible mechanisms assessed were the role of pyruvate in lipid oxidation and direct interaction between pyruvate and beef myoglobin. Microsomes were incubated with pyruvate at pH 5.6, 25 °C, and lipid oxidation was measured hourly for 3 h. Bovine oxymyoglobin at pH 5.6 was incubated with pyruvate and used to quantify both redox stability (metmyoglobin formation) and pyruvate-myoglobin adduction using mass spectrometry analysis. Surface color and lipid oxidation were measured on ground beef patties stored for 6 d in polyvinyl chloride over-wrap (PVC) or high oxygen. Addition of pyruvate to microsomes decreased lipid oxidation compared with controls (P < 0.05). Conversely, no effect on myoglobin was observed (no changes in redox stability and no peaks corresponding to pyruvate were observed; P > 0.05). However, pyruvate increased color stability and decreased lipid oxidation of ground beef patties packaged in PVC and high oxygen. Pyruvate decreased nitric oxide metmyoglobin-reducing capacity and oxygen consumption of patties compared with controls (P < 0.05). This research suggests that pyruvate may improve beef color stability primarily through its antioxidant effect on lipids. Practical Application: Discoloration of meat often results in significant revenue loss. This study suggests that pyruvate can improve the color stability of patties packaged in high oxygen and PVC primarily through its antioxidant effect on lipids.     

Yttrium aluminum garnet powders by nitrate decomposition and nitrate–urea solution combustion reactions—a comparative study

Precursors for yttrium aluminum garnet (Y₃Al₅O₁₂—YAG) were synthesized by simple decomposition of concentrated aqueous solution of nitrates and combustion of concentrated aqueous solution of nitrates with urea on a heater. The precursor formed by the former reaction was granules of agglomerated powder while that from the latter reaction was a voluminous and porous sponge-like mass. Both precursors were ground to powders and subjected to detailed thermogravimetric–differential thermal analysis and X-ray diffraction studies. The precursor from the simple decomposition of nitrates exhibited a total loss in weight of about 18% in stages (25 to 300 °C and 300 to 600 °C) accompanied by endotherms—characterized as processes of dehydration of absorbed moisture and decomposition of residual nitrates, respectively. The as formed precursor and that heated to 820 °C were amorphous. Crystallization to YAG phase occurred from an amorphous oxide characterized by an exotherm above 820 °C with no loss of weight. The precursor from nitrate–urea combustion reaction was found to exhibit a weight loss of 2.5% accompanied by a shallow endotherm in the range of 25 to 300 °C—characterized as the process of dehydration of absorbed moisture. No further weight loss or heat effect was noticed, confirming it to be chemically pure YAG. This as formed precursor was found to be crystalline YAG. The difference in chemical composition of the precursors formed by these two reactions is attributed to the difference in the actual reaction temperatures during their formation—lower reaction temperature for the endothermic decomposition of nitrates and higher reaction temperature for the exothermic combustion associated with the formation of a bright flame. The morphology of the precursor powder formed by the former reaction exhibited only cracks while that of the precursor from the latter reaction exhibited pores and voids. The precursor from the former reaction was calcined at 1100 °C to form into chemically pure YAG. Zeta potential variation with pH for the aqueous suspensions of the crystalline YAG powders from both the reactions exhibited a maximum value in the range of 40 to 50 mV around a pH of 4, indicating stability of these dispersions towards coagulation at this pH. Particle size distribution of wet ground powders (slurries with 20%, v/v, solid at a pH of 4) showed that the powder from combustion reaction could be formed into a finer size than that from simple nitrate decomposition, indicating the agglomerates of combustion reaction were softer.     

Thermochemical model on the carbothermal reduction of oxides during spark plasma sintering of zirconium diboride

Carbon was used to reduce oxides in spark plasma sintered ZrB₂ ultra-high temperature ceramics. A thermodynamic model was used to evaluate the reducing reactions to remove B₂O₃ and ZrO₂ from the powder. Powder oxygen content was measured and carbon additions of 0.5 and 0.75 wt% were used. A C–ZrO₂ pseudo binary diagram, ZrO₂–B₂O₃–C pseudo ternaries, and Zr–C–O potential phase diagrams were generated to show how the reactions can be related to an open system experiment in the tube furnace. Scanning transmission electron microscopy identified impurity phases composed of amorphous Zr–B–O with lamellar BN and a Zr–C–O ternary model was calculated under SPS sintering conditions at 1900°C and 6 Pa to understand how oxides can be retained in the microstructure.     

Studies on slip casting behavior of lanthanum strontium manganite

Dispersion conditions for slip (slurry) formulation of a powder mixture of lanthanum strontium manganite (La_0.84Sr_0.16MnO₃ - LSM) and carbon (pore former) in water was studied through detailed zeta-potential and rheological measurements. The zeta potential variation with pH for the aqueous suspensions of only LSM or carbon exhibited a maximum value in alkaline medium (−40 mV to −50 mV at a pH of 10-11), establishing the pH window for their co-dispersion for slurry formulation. A study of the viscosity variation with shear rate for the slurries with varying solid content (in the range of 45-65 wt.%) exhibited pseudo-plastic flow behavior, indicating presence of flocculates in them. The yield stress values obtained from the Casson equation reduced with decreasing solid content, indicating reduction in the flocculate strength. The slip with solid content of 50 wt.% exhibited optimum flow characteristics to form long tubes with uniform wall thickness (wall thickness 2-4 mm and length of 150-200 mm). The tubular specimens formed after controlled carbon burn out and sintering at 1400 °C for 1 h possessed about 35% open porosity. The porosity remained the same upon further sintering at 1400 °C for 8 h.