The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete

Thermal conductivity coefficients of concretes made up of mixtures of expanded perlite and pumice aggregates (PA) were measured. To determine the effect of silica fume (SF) and class C fly ash (FA) on the thermal conductivity of lightweight aggregate concrete (LWAC), SF and FA were added as replacement for cement by decreasing the cement weights in the ratios of 10%, 20% and 30% by weight.The highest thermal conductivity of 0.3178 W/mK was observed with the samples containing only PA and plain cement. It decreased with the increase of SF and FA as replacement for cement. The lowest value of thermal conductivity, which is 0.1472 W/mK, was obtained with the samples prepared with expanded perlite aggregate (EPA) replacement of PA and 70% cement+30% FA replacement of cement. Both SF and FA had a decreasing effect on thermal conductivity. EPA (used in place of PA) also induced a decrease of 43.5% in thermal conductivity of concrete.     

Production of high strength concrete by use of industrial by-products

Blast furnace slag aggregates (BFSA) were used to produce high-strength concretes (HSC). These concretes were made with total cementitious material content of 460–610 kg/m³. Different water/cement ratios (0.30, 0.35, 0.40, 0.45 and 0.50) were used to carry out 7- and 28-day compressive strength and other properties. Silica fume and a superplasticizer were used to improve BFSA concretes. Slump was kept constant throughout this study. Ten percent silica fume was added as a replacement for ordinary portland cement (OPC) in order to obtain HSC. The silica fume was used as highly effective micro-filler and pozzolanic admixture. Superplasticizer at dosages of 2%, 1.5%, 1%, 0.5% and 0% by OPC weight for 0.30, 0.35, 0.40, 0.45 and 0.50 w/c ratios, respectively, were adopted. Results showed that compressive strength of BFSA concretes were approximately 60–80% higher than traditional (control) concretes for different w/c ratios. These concretes also had low absorption and high splitting tensile strength values. It is concluded that BFSA, in combination with other supplementary cementitious materials, can be utilized in making high strength concretes.     

Adsorption behavior of copper(II) ion from aqueous solution on methacrylic acid‐grafted poly(ethylene terephthalate) fibers

The adsorption behavior of methacrylic acid‐grafted poly(ethylene terephthalate) fibers was studied toward the copper(II) ion in aqueous solutions by a batch equilibriation technique. The influence of treatment time, temperature, pH of the solution, metal ion concentration, and graft yield were considered. One hour of adsorption time was found sufficient to reach adsorption equilibrium for the copper(II) ion. It was found that the adsorption isotherm of Cu(II) fits Langmuir‐type isotherms. The adsorption process is not affected by the temperature when treated with low ion concentration, but is remarkably decreased at a high ion concentration. The heat of adsorption value was calculated as 0.71 kcal/mol. It was found that the reactive fibers are stable and regenerable by acid without losing their activity. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 766–772, 2000     

A genetic algorithm optimized ANN-based MPPT algorithm for a stand-alone PV system with induction motor drive

Artificial neural network (ANN) based maximum power point tracking (MPPT) algorithm makes use of the advantages of ANNs such as noise rejection capability and not requiring any prior knowledge of the physical parameters relating to PV system. This paper proposes a genetic algorithm (GA) optimized ANN-based MPPT algorithm implemented in a stand-alone PV system with direct-coupled induction motor drive. The major objective of this design is to eliminate dc–dc converter and its accompanying losses. Implementing off-line ANN in DSP needs optimization of ANN structure to obtain an ideal size. GA optimization was used in this study to determine neuron numbers in multi-layer perceptron neural network. Another objective of this work is to prevent the necessity of the trade-off between the tracking speed and the oscillations around the maximum power point. Hence, varying step size is used in MPPT algorithm and PI-controller is adopted for simple implementation. Simulation and experimental results have been used to demonstrate effectiveness of the proposed method.     

Identification of phenolic profiles,fatty acid compositions,antioxidant activities,and enzyme inhibition effects of seven wheat cultivars grown in Turkey: A phytochemical approach for their nutritional value

In the present article, seven wheat cultivars (Ahmetaga, Bezostaya, Dagdas-94, Ekiz, Karahan-99, Konya-2002, and Tosunbey) grown in Turkey were compared for their phytochemical composition, antioxidant, and enzyme inhibitory activities. Antioxidant capacities and enzyme inhibitory effects were investigated with colorimetric methods. Total phenolic content ranged from 40.71 to 86.34 mg of gallic acid equivalent/100 g wheat grain. Tosunbey (92 mg Trolox equivalent/100 g wheat grain) and Ahmetaga (114.56 mg Trolox equivalent/100 g wheat grain) cultivars exhibited strong 2,2 azino-bis (3-ethylbenzothiazloine-6-sulfonic acid) and 1,1-diphenyl-2-picrylhydrazyl free radical scavenging activities. As compared to other wheat cultivars, Tosunbey cultivar had remarkable both antioxidant and enzyme inhibitory effects with the highest level of phenolics. Ferulic acid, chlorogenic acid, and apigenin were the major phenolics in extracts tested. This study suggested that an increased intake of wheat derived products could represent an effective strategy for the management of oxidative stress related chronic and degenerative diseases such as Alzheimers and diabetes mellitus.     

A simple and efficient ultrasonic-assisted extraction procedure combined with UV-Vis spectrophotometry for the pre-concentration and determination of folic acid (vitamin B9) in various sample matrices

A simple and efficient ultrasonic-assisted extraction (UAE) procedure has been proposed for the pre-concentration of (2S)-2-[(4-{[(2-amino-4-hydroxypteridin-yl)methyl]amino}phenyl)formamido]pentanedioic acid (folic acid) in vegetables, pharmaceuticals and foods prior to determination at 540 nm using UV-Vis spectrophotometry. The method is based on hydrophobic ternary complex formation of folic acid with silver ions in the presence of cetyltrimethylammonium bromide (CTAB) as a sensitivity enhancer counter ion at pH 7.0, and then extraction into a micellar phase of polyethylene glycol monoalkyl ether (Genapol X-080). The impacts on the extraction efficiency and complex formation of analytical parameters such as sample pH, concentration of silver, concentration of surfactants and extraction time, ultrasonic time and sample volume, were investigated and optimised in detail. The matrix effect on the pre-concentration and determination of folic acid was investigated, and it was observed that the proposed method was highly selective against possible matrix co-extractives. Under optimised conditions, a good linear relationship between the analytical signal and folic acid concentration was obtained in the range of 0.6–180 μg l^?1 with a detection limit of 0.19 μg l^?1 and quantification limit of 0.63 μg l^?1. The applicability was evaluated using samples fortified at different concentration levels, and recoveries higher than 94.1% were obtained. The precision as the percent relative standard deviation (RSD%) was in range of 2.5–3.8% (10 and 40 μg l^?1, n = 5). The proposed method was validated by analysis of two standard reference materials (SRMs) and various real samples, and satisfactory results were obtained.     

Investigation of adsorption and inhibitive effect of 2-mercaptothiazoline on corrosion of mild steel in hydrochloric acid media

The inhibition effect of 2-mercaptothiazoline (2MT) on the corrosion behavior of mild steel (MS) in 0.5 M HCl solution was studied in both short and long immersion times (120 h) using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and linear polarization resistance (LPR) techniques. For long-term tests, hydrogen gas evolution (VH₂−t) and the change of the open circuit potential with immersion time (E_ocp − t) were also measured in addition to the former three techniques. The surface morphology of the MS after its exposure to 0.5 M HCl solution with and without 1.0 × 10⁻² M 2MT with the different immersion times was examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The thermal stability of the inhibitor film was investigated by thermogravimetric analysis (TGA). The value of activation energy (E_a) for the MS corrosion and the thermodynamic parameters such as adsorption equilibrium constant (K_ads), free energy of adsorption (ΔG_ads), adsorption heat (ΔH_ads) and adsorption entropy (ΔS_ads) values were calculated and discussed. The potential of zero charge (PZC) of the MS in inhibited solution was studied by the EIS method, and a mechanism for the adsorption process was proposed. The results showed that 2MT performed excellent inhibiting effect for the corrosion of the MS. Finally, the high inhibition efficiency was discussed in terms of adsorption of inhibitor molecules and protective film formation on the metal surface. TGA results also indicated that the inhibitor film on the surface had a relatively good thermal stability.     

Comparison of the structural and magnetic properties of submicron barium hexaferrite powders prepared by molten salt and solid state calcination routes

The effect of crystallinity and particle morphology of the submicron barium hexaferrite (BaFe₁₂O₁₉) powders on the magnetic properties was investigated on powders synthesized by solid-state calcination (BHF-c) and molten salt synthesis (BHF-m) methods. Solid-state calcination route was found to yield agglomerated powders with poor crystallinity, whereas molten salt synthesis resulted in well crystallized powders with an anisometric morphology. The saturation magnetization of the BHF-m and BHF-c samples is 59 emu/g, and 56 emu/g at 300 K, and 90 emu/g, and 86 emu/g at 10 K. The temperature dependence of magnetization of the BHF-m is higher and the increase in magnetocrystal anisotropy with decreasing temperature is also steeper than that of the BHF-c due to the higher crystallinity. The magnetocrystalline anisotropy constant, K, calculated from the Stoner–Wohlfarth theory, of the BHF-m and BHF-c powders is 14.24 and 10.14 HA²/kg, respectively. The higher effective anisotropy, K_eff of the BHF-m is also confirmed through ferromagnetic resonance measurements. In conclusion, the higher crystallinity, slightly higher particle size and anisometric morphology of the BHF-m particles translated into higher magnetic properties and magnetocrystalline anisotropy.     

A note on histamine levels in Turkish style fermented sausages

The histamine contents of Turkish style fermented sausages were determined on 46 samples of five different brands obtained from retail stores in Van in Turkey. Histamine was found in all samples in the range 19.64-87.47 mg/kg (mean 32.13 mg/kg). Histamine levels in the brands differed significantly (P<0.01). The results suggest that the histamine levels in the sausages were not hazardous in terms of public health although they may be a potential risk to sensitive individuals.