Novel 1,3,4-oxadiazole derivatives as efficient sensitizers for dye-sensitized solar cells: A combined experimental and computational study

We have synthesized and characterized donor–π–spacer–acceptor type molecules in which 1,3,4-oxadiazoles are π-spacers, triphenylamines are the donors and cyanoacetic acid are the acceptors for use as sensitizers in dye-sensitized solar cells (DSSCs). Detailed absorption, emission, electrochemical, photoelectrochemical and computational studies have been carried out on five novel derivatives. The dyes have an absorption range of 377–388 nm, and an emission in the range of 494–540 nm. There is a large charge transfer from the donor side to the acceptor side on excitation. The propeller shape of the triphenylamine and the bulky substituents on it help in reducing the dye-aggregation on TiO₂ surface. The dyes exhibited good overall conversion efficiency (2.79–3.21%). Plane wave calculations indicate that the dye has a reasonably strong binding to the TiO₂ surface and the generated DOS picture shows an overlap of the molecular orbitals of the dye and the TiO₂ bands. We conclude that the dyes have a promising role as sensitizers in DSSC.     

Influence of Microstructure and Surface Activation of Dual‐Phase Membrane Ce0.8Gd0.2O2−δ–FeCo2O4 on Oxygen Permeation

Dual‐phase oxygen transport membranes are fast‐growing research interest for application in oxyfuel combustion process. One such potential candidate is CGO‐FCO (60 wt% Ce_0.8Gd_0.2O_2?δ–40 wt% FeCo₂O₄) identified to provide good oxygen permeation flux with substantial stability in harsh atmosphere. Dense CGO‐FCO membranes of 1 mm thickness were fabricated by sintering dry pellets pressed from powders synthesized by one‐pot method (modified Pechini process) at 1200°C for 10 h. Microstructure analysis indicates presence of a third orthorhombic perovskite phase in the sintered composite. It was also identified that the spinel phase tends to form an oxygen deficient phase at the grain boundary of spinel and CGO phases. Surface exchange limitation of the membranes was overcome by La_0.6Sr_0.4Co_0.2Fe_0.8O_3?δ (LSCF) porous layer coating over the composite. The oxygen permeation flux of the CGO‐FCO screen printed with a porous layer of 10 μm thick LSCF is 0.11 mL/cm² per minute at 850°C with argon as sweep and air as feed gas at the rates of 50 and 250 mL/min.     

Electrical and Dielectric Properties of Non-magnetic Al<Superscript>3+</Superscript> Substituted Ni–Zn Nano Ferrites for High Frequency Applications

The effect of Al substitution on electrical and dielectric parameters of Ni–Zn ferrite has been discussed in the present work. The phase identification, surface morphology was studied using X-ray diffractometer (XRD), scanning electron microscope (SEM), respectively. The XRD patterns confirm the single-phase formation of these ferrites. With Al³⁺, substitution lattice parameter decreases due to smaller Al³⁺ ions replacing Fe³⁺ ions. The average grain size obtained from SEM results are in the range of 390–27 nm. The DC resistivity was observed to increase with increasing Al³⁺ ions concentration due to the unavailability of Fe³⁺ ions. Dielectric constant (\(\upvarepsilon ^{\prime }\)) and dielectric loss tangent (tan δ) have been studied as a function of frequency (1 kHz–10 MHz) and temperature (50–300 °C). The observed results are explained on the basis of interfacial polarization as predicted by Maxwell and Wagner.     

Investigation of Subthreshold Characteristics of Negative Capacitance Single-Active Layer Double-Gate (NC-SALDG) Thin-Film Transistor (TFT)

Silicon - In this paper, for the first time, the performance evaluation of negative capacitance single-active layer double-gate (NC-SALDG) TFT is presented. In the proposed NC-SALDG TFT, amorphous...     

Lymphatic Transport of α-Linolenic Acid and Its Conversion to Long Chain n-3 Fatty Acids in Rats Fed Microemulsions of Linseed Oil

In the present study we evaluated the uptake of ALA and its conversion to EPA + DHA in rats given linseed oil (LSO) in native form or as a microemulsion in whey protein or in lipoid. In a single oral dose study in which rats maintained on rodent pellets deficient in ω-3 fatty acids were intubated with 0.35 g LSO in lipoid, the amount of ALA present in lymph was increased reaching a maximum concentration of 16.23 mg/ml at 2.5 h. The amount of ALA present in lymph was increased to a maximum level of 10.95 mg/ml at 4 h in rats given LSO as a microemulsion in whey protein. When LSO was given without emulsification, the amount of ALA present in lymph was found to reach a maximum level of 7.08 mg/ml at 6 h. A similar result was observed when weaning rats were intubated with 0.15 g of LSO per day for a period of 60 days. Higher levels of ALA by 41 and 103 % were observed in lymph lipids of rats given microemulsions of LSO in whey protein and in lipoid respectively as compared to rats given LSO without pre-emulsification. Very little conversion of ALA to EPA and DHA was observed in lymph lipids but higher amounts of EPA + DHA was observed in liver and serum of rats given LSO in microemulsion form. This study indicated that ALA concentration in lymph lipids was increased when LSO was given in microemulsion form in lipoid and further conversion to EPA and DHA was facilitated in liver and serum.     

Characteristics and Novel Features of Thermostable α-Amylase Produced by Bacillus licheniformis M27 under Solid State Fermentation

The purified α-amylase from Bacillus licheniformis M27, produced under solid state fermentation technique, showed novel characteristics as compared to those reported by other workers for the purified α-amylases from B. licheniformis obtained by submerged fermentation process. Some of the novel features of the characteristics of the enzyme from B. licheniformis M27 include two peaks for pH optima at 6.5–7.0 and 8.5–9.0, gradual loss of activity to about 86% between pH 7.0–7.5 followed by rise to full activity between 7.5–8.5, temperature optimum at 85–90°C at pH 7.0 and 9.0, sharp fall in stability at acidic pH values and the thermostability response which is more similar to the enzyme from other species of Bacillus. The moleculuar weight of the enzyme was found to be 19,500 ± 500 and 56,000 ± 2,000 when determined by gel filtration and SDS PAGE, respectively. The activation energy is 20.4 times lower than that reported for the enzyme from another strain of B. licheniformis. It also showed differences in the contents of amino acids such as serine, proline and methionine.     

Role of Post-translational Modifications in Alzheimer's Disease

The global burden of Alzheimer's disease (AD) is growing. Valiant efforts to develop clinical candidates for treatment have continuously met with failure. Currently available palliative treatments are temporary and there is a constant need to search for reliable disease pathways, biomarkers and drug targets for developing diagnostic and therapeutic tools to address the unmet medical needs of AD. Challenges in drug-discovery efforts raise further questions about the strategies of current conventional diagnosis; drug design; and understanding of disease pathways, biomarkers and targets. In this context, post-translational modifications (PTMs) regulate protein trafficking, function and degradation, and their in-depth study plays a significant role in the identification of novel biomarkers and drug targets. Aberrant PTMs of disease-relevant proteins could trigger pathological pathways, leading to disease progression. Advancements in proteomics enable the generation of patterns or signatures of such modifications, and thus, provide a versatile platform to develop biomarkers based on PTMs. In addition, understanding and targeting the aberrant PTMs of various proteins provide viable avenues for addressing AD drug-discovery challenges. This review highlights numerous PTMs of proteins relevant to AD and provides an overview of their adverse effects on the protein structure, function and aggregation propensity that contribute to the disease pathology. A critical discussion offers suggestions of methods to develop PTM signatures and interfere with aberrant PTMs to develop viable diagnostic and therapeutic interventions in AD.     

Yield and Quality Characteristics of Rendered Chicken Oil for Biodiesel Production

Whole dead poultry birds obtained from commercial layer farms were assessed for fat in the whole carcass and then dry rendered in three different rendering regimens T₁, T₂ and T₃ (temperature = 120, 130 and 140 °C and shell pressure = 1, 2 and 3 kg/cm² respectively) and the effect on the yield and quality of the rendered chicken oil were studied. The overall fat percentage of the whole dead poultry carcass was 14.55 ± 0.17 % and the fat content of ‘greaves’ was 14.49 ± 0.38 %. In the dry batch rendering trials, the mean overall fat recovery was 24.46 ± 1.19, 26.78 ± 3.14 and 22.42 ± 2.32 % and the overall fat yield was 3.52 ± 1.72, 3.84 ± 0.44 and 3.22 ± 0.33 % of the carcass weight in T₁, T₂ and T₃ respectively. Solvent extraction of fat could recover 96.10 ± 0.14 % of fat from ‘greaves’ which was significantly higher than the mechanical centrifugation method. Among the quality characteristics of the rendered chicken oil (RCO), moisture content ranged from 0.61 % (T₂) to 1.09 % (T₁) and the mean specific gravity was 0.91 at 30 °C. The FFA values of RCO obtained from the T₃ rendering regimen were significantly (p < 0.05) higher than the FFA values of T₂ and T₁. The mean acid value, iodine number, peroxide value, saponification value and unsaponifiable matter present in RCO showed no significant difference. The fatty acid profile and calorific values were studied. The RCO was converted to biodiesel by transesterification and the physico-chemical properties of the biodiesel were studied and compared with the Indian biodiesel specification.     

Theoretical Investigation of Waste Heat Recovery from an IC Engine Using Vapor Absorption Refrigeration System and Thermoelectric Converter

This study proposes the preliminary simulation of a single cylinder spark ignition engine with waste heat recovery system. To harvest waste heat energy from the engine exhaust a thermoelectric generator coupled to a vapor absorption refrigeration (VAR) system was proposed in this simulation work. Parametric simulation of engine, thermoelectric generator and VAR using thermodynamic relations was carried out in MATLAB – Simulink software. An attempt has been made mathematically to integrate engine, thermoelectric generator and VAR system to study the effect of engine load, speed, equivalence ratio on thermoelectric output and coefficient of performance (COP) of a VAR system. In this study, the VAR system runs by taking heat energy from the exhaust gas and the electric power produced by a thermoelectric generator was utilized to run the pump of the refrigeration system. It was found that COP of the absorption refrigeration system depends on engine load, speed and air fuel equivalence ratio. The study also reveals that about 10% to 15% of the total exhaust energy can be harvested using this system.