Review: Investigation of Partially Pre-mixed Charge Ignitions (PPCI) Engine Mode

This paper embraces the key points of unpolluted internally combusted engine emissions. Core objective is focused on the recent effort to improve compression ignition(CI) and spark ignition(SI) engine to have fuel-efficient and minimized pollutant emissions. There are many advanced internal combustion engines to overcome the challenges of conventional compression ignition engines of the high level of particulate matter(PM) and oxides of nitrogen emission. One of the latest options on which many ...     

Water absorption,residual mechanical and thermal properties of hydrothermally conditioned nano-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> enhanced glass fiber reinforced polymer composites

The durability of the nano-Al₂O₃ enhanced glass fiber reinforced polymer (GFRP) composites in hydrothermal environment is necessary for hydro/hygro thermal applications. The present investigation emphasizes the effect of nano-Al₂O₃ filler concentration on moisture absorption kinetics, residual mechanical and thermal properties of hydrothermally treated GFRP nano-composites. Nano-Al₂O₃ particles were mixed with epoxy matrix through temperature assisted magnetic stirrer and followed by ultrasonic treatment. It has been observed that, the addition of 0.1 wt% of nano-Al₂O₃ into the GFRP nano-composites reduces the moisture diffusion coefficient by 10%, as well as improves the flexural residual strength by 16% and interlaminar residual shear strength by 17% as compared to the neat epoxy GFRP composites. However, the glass transition temperature has not been improved by the addition of nano-Al₂O₃ filler. Weibull design parameters have been determined for dry and hydrothermally conditioned nano-composites. A good agreement between the experimental and the simulated stress–strain results has been observed. The interface failure mechanism has been evaluated by field emission scanning electron microscope to support the new findings.     

Theoretical Investigation of Waste Heat Recovery from an IC Engine Using Vapor Absorption Refrigeration System and Thermoelectric Converter

This study proposes the preliminary simulation of a single cylinder spark ignition engine with waste heat recovery system. To harvest waste heat energy from the engine exhaust a thermoelectric generator coupled to a vapor absorption refrigeration (VAR) system was proposed in this simulation work. Parametric simulation of engine, thermoelectric generator and VAR using thermodynamic relations was carried out in MATLAB – Simulink software. An attempt has been made mathematically to integrate engine, thermoelectric generator and VAR system to study the effect of engine load, speed, equivalence ratio on thermoelectric output and coefficient of performance (COP) of a VAR system. In this study, the VAR system runs by taking heat energy from the exhaust gas and the electric power produced by a thermoelectric generator was utilized to run the pump of the refrigeration system. It was found that COP of the absorption refrigeration system depends on engine load, speed and air fuel equivalence ratio. The study also reveals that about 10% to 15% of the total exhaust energy can be harvested using this system.     

Yield and Quality Characteristics of Rendered Chicken Oil for Biodiesel Production

Whole dead poultry birds obtained from commercial layer farms were assessed for fat in the whole carcass and then dry rendered in three different rendering regimens T₁, T₂ and T₃ (temperature = 120, 130 and 140 °C and shell pressure = 1, 2 and 3 kg/cm² respectively) and the effect on the yield and quality of the rendered chicken oil were studied. The overall fat percentage of the whole dead poultry carcass was 14.55 ± 0.17 % and the fat content of ‘greaves’ was 14.49 ± 0.38 %. In the dry batch rendering trials, the mean overall fat recovery was 24.46 ± 1.19, 26.78 ± 3.14 and 22.42 ± 2.32 % and the overall fat yield was 3.52 ± 1.72, 3.84 ± 0.44 and 3.22 ± 0.33 % of the carcass weight in T₁, T₂ and T₃ respectively. Solvent extraction of fat could recover 96.10 ± 0.14 % of fat from ‘greaves’ which was significantly higher than the mechanical centrifugation method. Among the quality characteristics of the rendered chicken oil (RCO), moisture content ranged from 0.61 % (T₂) to 1.09 % (T₁) and the mean specific gravity was 0.91 at 30 °C. The FFA values of RCO obtained from the T₃ rendering regimen were significantly (p < 0.05) higher than the FFA values of T₂ and T₁. The mean acid value, iodine number, peroxide value, saponification value and unsaponifiable matter present in RCO showed no significant difference. The fatty acid profile and calorific values were studied. The RCO was converted to biodiesel by transesterification and the physico-chemical properties of the biodiesel were studied and compared with the Indian biodiesel specification.     

Experimental investigation and multiresponse genetic optimization of drilling parameters for self-healing GFRP

Journal of Mechanical Science and Technology - Self-healing materials heal partially or completely when damage occurs to restore the functionality of the material. Self-healing technology has found...     

RESRES: The story behind the paper “Research in software engineering: An analysis of the literature”

This article is a background report describing a comprehensive study of research in the three computing disciplines Computer Science, Software Engineering, and Information Systems. Findings relate to research topics, approaches, methods, reference disciplines, and levels of analysis. The article informally describes the process used and the research products produced.     

Failure Analysis of AISI 440C Steel Ball Screws Used in the Actuator System of a Satellite Launch Vehicle

In view of its excellent wear and corrosion resistance, AISI 440C steel is the material of choice for the fabrication of ball screws used in actuator systems of satellite launch vehicles. During the routine acceptance test of a ball screw, longitudinal cracks were observed at the shaft location of the ball screw. The optical microstructure of the ball screw material (AISI 440C) revealed the presence of aligned carbides (carbide banding). Fractographic observations revealed the cracking to be along the carbide bands. Based on detailed optical and scanning electron microscopic observations, the cracking of the ball screws was attributed to the carbide bands.     

Electron spin resonance and AC susceptibility studies on La0.9Pb0.1MnO3 single crystals

Phase separation has been recognized as important properties of manganite to create colossal magnetoresistance (CMR). Frequency dependence of AC susceptibility and electron spin resonance (ESR) studies confirm the phase separated glassy magnetism in the La_0.9Pb_0.1MnO₃ crystals. ESR spectra exhibit a gradual narrowing of the asymmetric FMR signals upon increasing the temperature and approaching the Curie temperature (T_c). The temperature dependence of line width (ΔH_pp), g-factor, double integrated (I) intensity of the resonance signals and frequency dependence peak temperatures are discussed in this paper to explain inhomogeneity in the La_0.9Pb_0.1MnO₃ single crystals.