An alternative cooling system to enhance the safety of Li-ion battery packs

A passive thermal management system is evaluated for high-power Li-ion packs under stressful or abusive conditions, and compared with a purely air-cooling mode under normal and abuse conditions. A compact and properly designed passive thermal management system utilizing phase change material (PCM) provides faster heat dissipation than active cooling during high pulse power discharges while preserving sufficiently uniform cell temperature to ensure the desirable cycle life for the pack. This study investigates how passive cooling with PCM contributes to preventing the propagation of thermal runaway in a single cell or adjacent cells due to a cell catastrophic failure. Its effectiveness is compared with that of active cooling by forced air flow or natural convection using the same compact module and pack configuration corresponding to the PCM matrix technology. The effects of nickel tabs and spacing between the cells were also studied.     

Molecular engineering of semiconductor surfaces and devices

Grafting organic molecules onto solid surfaces can transfer molecular properties to the solid. We describe how modifications of semiconductor or metal surfaces by molecules with systematically varying properties can lead to corresponding trends in the (electronic) properties of the resulting hybrid (molecule + solid) materials and devices made with them. Examples include molecule-controlled diodes and sensors, where the electrons need not to go through the molecules (action at a distance), suggesting a new approach to molecule-based electronics.     

On an Optimization Problem in Sensor Selection*

We address the following sensor selection problem. We assume that a dynamic system possesses a certain property, call it Property D, when a set of sensors is used. There is a cost c_A associated with each set A of sensors that is a subset of . Given any set of sensors that is a subset of , it is possible to determine, via a test, whether the resulting system-sensor combination possesses Property D. Each test required to check whether or not Property D holds incurs a fixed cost. For each set of sensors A that is a subset of there is an a priori probability p_A that the test will be positive, i.e., the system-sensor combination possesses Property D. The objective is to determine a test strategy, i.e., a sequence of tests, to minimize the expected cost, associated with the tests, that is incurred until a least expensive combination of sensors that results in a system-sensor combination possessing Property D is identified. We determine conditions on the sensor costs c_A and the a priori probabilities p_A under which the strategy that tests combinations of sensors in increasing order of cost is optimal with respect to the aforementioned objective.     

A 4 GHz ΔΣ Fractional-N Frequency Synthesizer

A 4 GHz fractional-N frequency synthesizer for wireless communications applications is implemented in a 0.35 m BiCMOS process. The synthesizer achieves a close-in phase noise of –66 dBc/Hz. The key building blocks are an ECL multiple-modulus prescaler employing the phase-switching architecture to minimize the power dissipation, a digital third-order MASH -modulator that controls the modulus of the prescaler, a very linear phase detector that enables the synthesizer to achieve a low close-in phase noise, and a chargepump providing a constant output current over a large output voltage range. The power dissipation of the synthesizer chip is 27.7 mW from a 2.7 V supply.     

A Model for the Performance Evaluation of Packet Transmissions Using Type-II Hybrid ARQ over a Correlated Error Channel

Type-II Hybrid-ARQ (Type-II HARQ) has been shown, under certain circumstances, to increase the efficiency and reduce loss of data transmissions over a wireless channel. However, it is difficult to predict how it will perform when transmission symbol errors are correlated. We present a computationally efficient approach to the performance evaluation of packet transmissions over a wireless link employing Type-II HARQ error mitigation when the physical channel is subject to correlated transmission symbol errors. This provides a tool for static or online optimization of system parameters. We present numerical results for a wide range of channel statistics, illustrating the effect of bit error correlation, bit error rate, and block size on packet latency and loss rate.     

UHF RFID tag-antenna matching optimization using VHDL-AMS behavioral modeling

In order to generate a first-time right design, system level modeling and simulation is a major step. Thus, optimization of integrated wireless systems requires the development of behavioral models of the RF link (antenna-medium-antenna) compatible with the microelectronic design tools. Firstly, this paper shows the need of such models within the Top-Down design flow of an UHF RFID system. Then, a behavioral model of a narrow band far field RF link is presented and validated. This model is associated with a new behavioral model of an RFID tag and finally, several examples of tag-antenna matching optimization simulations are presented in order to demonstrate the interest of our approach.     

Coordinated Decentralized Protocols for Failure Diagnosis of Discrete Event Systems

We address the problem of failure diagnosis in discrete event systems with decentralized information. We propose a coordinated decentralized architecture consisting of local sites communicating with a coordinator that is responsible for diagnosing the failures occurring in the system. We extend the notion of diagnosability, originally introduced in Sampath et al. (1995) for centralized systems, to the proposed coordinated decentralized architecture. We specify three protocols that realize the proposed architecture; each protocol is defined by the diagnostic information generated at the local sites, the communication rules used by the local sites, and the coordinator's decision rule. We analyze the diagnostic properties of each protocol. We also state and prove conditions for a language to be diagnosable under each protocol. These conditions are checkable off-line. The on-line diagnostic process is carried out using the diagnosers introduced in Sampath et al. (1995) or a slight variation of these diagnosers. The key features of the proposed protocols are: (i) they achieve, each under a set of assumptions, the same diagnostic performance as the centralized diagnoser; and (ii) they highlight the performance vs. complexity tradeoff that arises in coordinated decentralized architectures. The correctness of two of the protocols relies on some stringent global ordering assumptions on message reception at the coordinator's site, the relaxation of which is briefly discussed.     

Light truck vehicles (LTVs) contribution to rear-end collisions

Light truck vehicles (LTVs), comprising light-duty trucks, vans, and sport-utility vehicles (SUVs) drive higher and wider than passenger cars which could affect the visibility for the following passenger car driver. This paper investigates the contribution of LTVs to rear-end collisions resulting from horizontal visibility blockage using the University of Central Florida sophisticated reconfigurable driving simulator. Indeed, a sudden stop of a leading LTV, in the shadow of the blindness of the succeeding passenger car driver, may deprive the latter of a sufficient response time, which may lead to high probability of a rear-end collision. To investigate this issue, two scenarios were developed in the UCF driving simulator. The first scenario serves as a base scenario where the simulator car follows a passenger car, and the second scenario serves as a test scenario, where the simulator car follows an LTV. The results obtained by comparing the scenarios showed that LTVs produce more rear-end collisions at unsignalized intersections due to horizontal visibility blockage and due to the resulting drivers' behavior when driving behind an LTV.     

Electrically controlled molecular recognition harnessed to activate a cellular response

Seamless embedment of electronic devices in biological systems is expected to add the outstanding computing power, memory, and speed of electronics to the biochemical toolbox of nature. Such amalgamation requires transduction of electronic signals into biochemical cues that affect cells. Inspired by biology, where pathways are directed by molecular recognition, we propose and demonstrate a generic electrical-to-biological transducer comprising a two-state electronic antigen and a chimeric cell receptor engineered to bind the antigen exclusively in its "on" state. T-cells expressing these receptors remain inactivated with the antigen in its "off" state. Switching the antigen to its "on" state by an electrical signal leads to its recognition by the T-cells and correspondingly to cell activation.     

Influence of capsule shell composition on the performance indicators of hypromellose capsule in comparison to hard gelatin capsules

The purpose of this study was to assess the in vitro performances of “vegetable” capsules in comparison to hard gelatin capsules in terms of shell weight variation, reaction to different humidity conditions, resistance to stress in the absence of moisture, powder leakage, disintegration and dissolution. Two types of capsules made of HPMC produced with (Capsule 2) or without (Capsule 3) a gelling agent and hard gelatin capsules (Capsule 1) were assessed. Shell weight variability was relatively low for all tested capsules shells. Although Capsule 1 had the highest moisture content under different humidity conditions, all capsule types were unable to protect the encapsulated hygroscopic polyvinylpyrrolidone (PVP) powder from surrounding humidity. The initial disintegration for all Capsule 1 occurred within 3?min, but for other types of capsules within 6?min (n?=?18). Dissolution of acetaminophen was better when the deionized water (DIW) temperature increased from 32 to 42?°C in case of Capsule 1, but the effect of temperature was not significant for the other types of capsules. Acetaminphen dissolution from Capsule 1 was the fastest (i.e. >90% in 10?min) and independent of the media pH or contents unlike Capsule 2 which was influenced by the pH and dissolution medium contents. It is feasible to use hypromellose capsules shells with or without gelling agent for new lines of pharmaceutical products, however, there is a window for capsule shells manufacturing companies to improve the dissolution of their hypromellose capsules to match the conventional gelatin capsule shells and eventually replace them.