Degradation of Nextel™ 610‐based oxide‐oxide ceramic composites by aluminum oxychloride decomposition products

Nextel? 610 alumina fibers and alumina‐YAG (yttrium‐aluminum garnet) matrices were used to make oxide‐oxide ceramic matrix composites (CMCs) with and without monazite (LaPO₄) fiber‐matrix interfaces. Twelve sequential aluminum oxychloride (AlOCl) infiltrations with 1 hour heat treatments at 1100°C and a final 1 hour heat treatment at 1200°C were used for matrix densification. This matrix processing sequence severely degraded CMC mechanical properties. CMC tensile strengths and interlaminar tensile (ILT) strengths were less than 10 MPa and 1 MPa, respectively. Axial fracture of Nextel? 610 fibers was observed after ILT testing, highlighting the extreme degradation of fiber strength. Extensive characterization was done to attempt to determine the responsible degradation mechanisms. Changes in Nextel? 610 fiber microstructure after CMC processing were characterized by optical microscopy, SEM, and extensively by TEM. In AlOCl degraded fibers, grain boundaries near the fiber surface were wetted with a glass that contained Y₂O₃/SiO₂ or Y₂O₃/La₂O₃/P₂O₅/SiO₂, and near‐surface pores were partially filled with Al₂O₃. This glass must also contain some Al₂O₃ and initially some chlorine. AlOCl decomposition products were predicted using the FactSage^® Thermochemical code, and were characterized by mass spectrometry. Effects of AlOCl precursors on monazite coated and uncoated Nextel? 610 fibers tow and filament strength were evaluated. A mechanism for the severe degradation of the oxide‐oxide CMCs and Nextel? 610 fibers that involves subcritical crack growth promoted by release of chlorine containing species during breakdown of intergranular glasses in an anhydrous environment is proposed.     

Dielectric Properties and Relaxation in (1−x)BiScO3–xBa(Mg1/3Nb2/3)O3 Solid Solutions

The dielectric properties and frequency dispersion associated with a dielectric relaxation were evaluated within the perovskite (1− x )BiScO₃– x Ba(Mg_1/3Nb_2/3)O₃ solid solution systems (0.7 ≤ x ≤ 1). With increasing BiScO₃, the room-temperature dielectric permittivity at low frequency (100 Hz) increased up to 115 at x = 0.7, and a dielectric relaxation phenomenon was evident. Relaxation parameters were analyzed using several Arrhenius-type equations, and the microwave dielectric property measurement using rectangular wave-guide method enabled confirmation of the extrapolated value of the Arrhenius plot. The result of the microwave dielectric property measurement was also checked with J -function fitting based on the frequency-dependent Gaussian distribution of the associated dielectric loss data at low frequency.     

Metallic fast reactor fuel fabrication for the global nuclear energy partnership

Fast reactors are once again being considered for nuclear power generation, in addition to transmutation of long-lived fission products resident in spent nuclear fuels. This re-consideration follows with intense developmental programs for both fuel and reactor design. One of the two leading candidates for next generation fast reactor fuel is metal alloys, resulting primarily from the successes achieved in the 1960s to early 1990s with both the experimental breeding reactor-II and the fast flux test facility. The goal of the current program is to develop and qualify a nuclear fuel system that performs all of the functions of a conventional, fast-spectrum nuclear fuel while destroying recycled actinides, thereby closing the nuclear fuel cycle. In order to meet this goal, the program must develop efficient and safe fuel fabrication processes designed for remote operation. This paper provides an overview of advanced casting processes investigated in the past, and the development of a gaseous diffusion calculation that demonstrates how straightforward process parameter modification can mitigate the loss of volatile minor actinides in the metal alloy melt.     

Resource allocation on computational grids using a utility model and the knapsack problem

This work introduces a utility model (UM) for resource allocation on computational grids and formulates the allocation problem as a variant of the 0–1 multichoice multidimensional knapsack problem. The notion of task-option utility is introduced, and it is used to effect allocation policies. We present a variety of allocation policies, which are expressed as functions of metrics that are both intrinsic and external to the task and resources. An external user-defined credit-value metric is shown to allow users to intervene in the allocation of urgent or low priority tasks. The strategies are evaluated in simulation against random workloads as well as those drawn from real systems. We measure the sensitivity of the UM-derived schedules to variations in the allocation policies and their corresponding utility functions. The UM allocation strategy is shown to optimally allocate resources congruent with the chosen policies.     

Impact of a plant extract on the viability of Lactobacillus delbrueckii ssp. bulgaricus and Streptococcus thermophilus in nonfat yogurt

The effect of a plant extract (prepared from olive, garlic, onion and citrus with sodium acetate as a carrier) on the viability of yogurt starter cultures was studied. Nonfat yogurt was prepared with various levels of supplements: plant extract (0, 0.5 or 1.0%, w/v) or l-cysteine HCl (0.014 or 0.028%, w/w). Microbial and physicochemical analyses were conducted weekly for 50 days. Fermentation time increased for supplemented yogurts compared with the non-supplemented yogurt. Lactobacillus bulgaricus counts in supplemented yogurts were >6 log cfu mL^?1 for a longer time (7–21 days) compared with the non-supplemented yogurt. Streptococcus thermophilus counts in all yogurts were > 6 log cfu mL^?1 throughout the storage. Overall, redox potential and titratable acidity of yogurts on day 50 were greater compared with day 1, but pH and syneresis were less. Plant extract at 0.5% enhanced L. bulgaricus viability in nonfat yogurt while least affecting the physicochemical characteristics.     

Equilibrium States of Liquid, Solid, and Vapor and the Configurations for Copper, Tungsten, and Pores in Liquid-Phase Sintering

The equilibrium state of the liquid–solid structure during liquid-phase sintering (LPS) is pondered with respect to minimum energy geometries. Besides the solid–liquid ratio, several interfacial energies determine the most stable geometric configuration. In this study, we rely on the attributes of the copper or nickel as the liquid, tungsten as the solid, and vapor to solve for terminal configurations that include liquid pools inside the solid grains. Surface evolution is enabled using a stepwise computer program[1] to rearrange and reshape small grain clusters reflective of LPS based on a preset combination of wetting and dihedral angles. The findings show how different interfacial energies, as a result of oxidation or impurity segregation, play a role in determining the final geometry. The specific concern is identification of situations in which a liquid is stable inside the solid, as observed in some LPS materials.     

Monazite Coatings on Fibers: I, Effect of Temperature and Alumina Doping on Coated-Fiber Tensile Strength

Monazite was continuously coated onto Nextel 720 fibers, using an aqueous precursor and in-line heat treatment at 900°–1300°C. Some experiments were repeated with alumina-doped precursors. Coated fibers were heat-treated for 100 h at 1200°C. Coatings were characterized by optical microscopy, scanning electron microscopy, and analytical transmission electron microscopy. Coated-fiber tensile strengths were measured by single-filament tensile tests. The precursors were characterized by X-ray diffractometry, differential thermal analysis/thermogravimetric analysis, and mass spectrometry. Coated-fiber tensile strength was lower for fibers coated at higher deposition temperatures. Heat treatment for 100 h at 1200°C decreased tensile strength further. The coatings were slightly phosphate-rich and enhanced alumina grain growth at the fiber surface, but phosphorus was not detected along the alumina grain boundaries. Fibers with alumina-doped coatings had higher tensile strengths than those with undoped coatings after heat treatment for 100 h at 1200°C. Alumina added as α-alumina particles gave higher strengths than alumina added as colloidal boehmite. Alumina doping slowed monazite grain growth and formed rough fiber–coating interfaces after 100 h of heat treatment at 1200°C. Possible relationships among precursor characteristics, coating and fiber microstructure development, and strength-degradation mechanisms are discussed in this paper.     

Model-based diagnosis of large diesel engines based on angular speed variations of the crankshaft

This work aims at monitoring large diesel engines by analyzing the crankshaft angular speed variations. It focuses on a powerful 20-cylinder diesel engine with crankshaft natural frequencies within the operating speed range. First, the angular speed variations are modeled at the crankshaft free end. This includes modeling both the crankshaft dynamical behavior and the excitation torques. As the engine is very large, the first crankshaft torsional modes are in the low frequency range. A model with the assumption of a flexible crankshaft is required. The excitation torques depend on the in-cylinder pressure curve. The latter is modeled with a phenomenological model. Mechanical and combustion parameters of the model are optimized with the help of actual data. Then, an automated diagnosis based on an artificially intelligent system is proposed. Neural networks are used for pattern recognition of the angular speed waveforms in normal and faulty conditions. Reference patterns required in the training phase are computed with the model, calibrated using a small number of actual measurements. Promising results are obtained. An experimental fuel leakage fault is successfully diagnosed, including detection and localization of the faulty cylinder, as well as the approximation of the fault severity.     

Are working memory deficits in bipolar disorder markers for psychosis?

Working memory deficits have been identified in bipolar disorder, but there is evidence suggesting that these deficits may be markers for psychosis rather than affective disorder. The current study examined this issue by comparing two groups of individuals with bipolar disorder, one with psychotic features and one without psychotic features, with a group of normal controls. Working memory was conceptualized as a multicomponent system that includes auditory and visuospatial short-term stores, executive control processes, and an episodic buffer that allows for communication between short- and long-term memory stores (Baddeley & Logie, 1999). Results indicated that only executive control processes significantly differentiated the psychotic and nonpsychotic bipolar groups, although visuospatial working memory differentiated both bipolar groups from controls. The results support the idea that some aspects of working memory performance are markers for psychosis, while others may be more general markers for bipolar disorders. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Drought contingency planning

Simulation gaming has the potential to enhance the effectiveness of drought management planning. The Indianapolis water supply system is used to illustrate how. First, the probability of experiencing a severe drought in Indianapolis is examined using historical streamflow data. The effects of such a drought on the municipal water supply system are then analysed using a recently developed simulation model of the Indianapolis water system. Consideration is given to the water resource decision-making problems that might arise under drought conditions, along with a discussion of the benefits of employing simulation gaming in the analysis of these problems. A basic outline for the design of a drought management simulation exercise is presented.