Low‐loss TCP/IP header compression for wireless networks

Wireless is becoming a popular way to connect mobile computers to the Internet and other networks. The bandwidth of wireless links will probably always be limited due to properties of the physical medium and regulatory limits on the use of frequencies for radio communication. Therefore, it is necessary for network protocols to utilize the available bandwidth efficiently. Headers of IP packets are growing and the bandwidth required for transmitting headers is increasing. With the coming of IPv6 the address size increases from 4 to 16 bytes and the basic IP header increases from 20 to 40 bytes. Moreover, most mobility schemes tunnel packets addressed to mobile hosts by adding an extra IP header or extra routing information, typically increasing the size of TCP/IPv4 headers to 60 bytes and TCP/IPv6 headers to 100 bytes. In this paper, we provide new header compression schemes for UDP/IP and TCP/IP protocols. We show how to reduce the size of UDP/IP headers by an order of magnitude, down to four to five bytes. Our method works over simplex links, lossy links, multi‐access links, and supports multicast communication. We also show how to generalize the most commonly used method for header compression for TCP/IPv4, developed by Jacobson, to IPv6 and multiple IP headers. The resulting scheme unfortunately reduces TCP throughput over lossy links due to unfavorable interaction with TCP's congestion control mechanisms. However, by adding two simple mechanisms the potential gain from header compression can be realized over lossy wireless networks as well as point‐to‐point modem links. This revised version was published online in June 2006 with corrections to the Cover Date.     

Performance analysis of session oriented data communications for mobile computing in cellular systems

Future cellular communication systems must seamlessly support services for a wide range of user needs, including voice, data, video and multi‐media. It is envisioned that mobile users may do much computer processing in an off‐line mode but must occasionally connect to a network in order to exchange data and/or files. For this purpose a communication session is initiated. During the session the user has access to network resources, although this access may be shared with others. Owing to the mobile environment, the user's connection to the network during a session may be severed. Since the mobile user can act semi‐autonomously, such disconnections can be transparent. That is, the mobile user can continue to function in an off‐line mode while the system will begin transparent automatic reconnection attempts to reestablish a link to the network. Only after a fixed (given) number of such attempts to reconnect have failed, is the session deemed to have failed. The issue is complicated by the hostile mobile radio environment and by user mobility. We consider session‐oriented communications and develop a tractable analytical model for traffic performance based on multi‐dimensional birth–death processes. The approach allows consideration of various platform types, such as pedestrians, automobiles, and buses, which may have very different mobility characteristics. Performance characteristics, such as: blocking, forced session termination, carried traffic, the average time per suspension, and the average number of suspensions per session, are calculated. This revised version was published online in July 2006 with corrections to the Cover Date.     

Volume rendering of segmented image objects

This paper describes a new method of combining ray-casting with segmentation. Volume rendering is performed at interactive rates on personal computers, and visualizations include both "superficial" ray-casting through a shell at each object's surface and "deep" ray-casting through the confines of each object. A feature of the approach is the option to smoothly and interactively dilate segmentation boundaries along all axes. This ability, when combined with selective "turning off" of extraneous image objects, can help clinicians detect and evaluate segmentation errors that may affect surgical planning. We describe both a method optimized for displaying tubular objects and a more general method applicable to objects of arbitrary geometry. In both cases, select three-dimensional points are projected onto a modified z buffer that records additional information about the projected objects. A subsequent step selectively volume renders only through the object volumes indicated by the z buffer. We describe how our approach differs from other reported methods for combining segmentation with ray-casting, and illustrate how our method can be useful in helping to detect segmentation errors.     

Automated segmentation, classification, and tracking of cancer cell nuclei in time-lapse microscopy

Quantitative measurement of cell cycle progression in individual cells over time is important in understanding drug treatment effects on cancer cells. Recent advances in time-lapse fluorescence microscopy imaging have provided an important tool to study the cell cycle process under different conditions of perturbation. However, existing computational imaging methods are rather limited in analyzing and tracking such time-lapse datasets, and manual analysis is unreasonably time-consuming and subject to observer variances. This paper presents an automated system that integrates a series of advanced analysis methods to fill this gap. The cellular image analysis methods can be used to segment, classify, and track individual cells in a living cell population over a few days. Experimental results show that the proposed method is efficient and effective in cell tracking and phase identification.     

Translating moral orders: putting moral conflict theory in conversation with actor–network theory

Moral conflict theory explains deep moral differences and patterns of communication commonly associated with such conflicts. Moral conflict is defined as a struggle between humans, but we argue that the objects of contention in such intractable conflicts, including texts, physical objects, and places, assume a force of their own. We use actor–network theory to help explain this eventuality and to expand our understanding of moral conflict. Combining actor–network theory literature with moral conflict theory literature helps us understand the complexity of moral orders and the networks of actors involved in the construction of moral conflict. This expansion of literature also allows us to conceive of more possibilities for transcendent discourse.     

Ferroelectric Materials: Probing Local and Global Ferroelectric Phase Stability and Polarization Switching in Ordered Macroporous PZT (Adv. Funct. Mater. 5/2011)

We describe the characterization, ferroelectric phase stability and polarization switching in strain‐free assemblies of PbZr_0.3Ti_0.7O₃ (PZT) nanostructures. The 3‐dimensionally ordered macroporous structures present uniquely large areas and volumes of PZT where the microstructure is spatially modulated and the composition is homogeneous. Variable temperature powder X‐ray diffraction (XRD) studies show that the global structure is crystalline and tetragonal at room temperature and undergoes a reversible tetragonal to cubic phase transition on heating/cooling. The measured phase‐transition temperature is 50–60 °C lower than bulk PZT of the same composition. The local ferroelectric properties were assessed using piezoresponse force spectroscopy that reveal an enhanced piezoresponse from the nanostructured films and demonstrate that the switching polarization can be spatially mapped across these structures. An enhanced piezoresponse is observed in the nanostructured films which we attribute to the formation of strain free films, thus for the first time we are able to assess the effects of crystallite‐size independently of internal stress. Corresponding polarization distributions have been calculated for the bulk and nanostructured materials using a direct variational method and Landau‐Ginzburg‐Devonshire (LGD) theory. By correlating local and global characterization techniques we have for the first time unambiguously demonstrated the formation of tetragonal and ferroelectric PZT in large volume nanostructured architectures. With the wide range of materials available that can be formed into such controlled architectures we conclude that this study opens a pathway for the effective studies of nanoscale ferroelectrics in uniquely large volumes.     

Development of the high-pressure electro-dynamic gradient crystal-growth technology for semi-insulating CdZnTe growth for radiation detector applications

The high-pressure electro-dynamic gradient (HP-EDG) crystal-growth technology has been recently developed and introduced at eV PRODUCTS to grow large-volume, semi-insulating (SI) CdZnTe single crystals for room-temperature x-ray and gamma-ray detector applications. The new HP growth technology significantly improves the downstream CdZnTe device-fabrication yield compared to earlier versions of the HP crystal-growth technology because of the improved structural and charge-transport properties of the CdZnTe ingots. The new state-of-the-art, HP-EDG crystal-growth systems offer exceptional flexibility and thermal and mechanical stability and allow the growth of high-purity CdZnTe ingots. The flexibility of the multi-zone heater system allows the dynamic control of heat flow to optimize the growth-interface shape during crystallization. This flexibility combined with an advanced control system, improved system diagnostics, and realistic heat-transport modeling provides an excellent platform for continuing process development. Initial results on large-diameter (140 mm), SI Cd_1−xZn_xTe (x=0.1) ingots grown in low temperature gradients with the HP-EDG technique show reduced defect density and complete elimination of ingot cracking. The increased single-crystal yield combined with the improved charge transport allows the fabrication of large-volume, high-sensitivity, high energy-resolution detector devices at increased yield. The CdZnTe ingots grown to date produced large-volume crystals (≥1cm³) with electron mobility-lifetime product (μτ_e) in the (3–7) × 10⁻³ cm²/V range. The lower-than-desired charge-transport uniformity of the HP-EDG CdZnTe ingots is associated with the high density of Te inclusions formed in the ingots during crystallization. The latest process-development efforts show a reduction in the Te-inclusion density, an increase of the charge-transport uniformity, and improved energy resolution of the large-volume detectors fabricated from these crystals.     

用P1905.1设计新一代家庭网络

家庭互连技术正在向第二代演变,将能提供运营商和消费者所希望的服务质量,并能让用户透明地使用家庭网络.本文就是介绍了一种新的家庭网络设计方案.     

RERBEE: robust efficient registration via bifurcations and elongated elements applied to retinal fluorescein angiogram sequences

We present RERBEE (robust efficient registration via bifurcations and elongated elements), a novel feature-based registration algorithm able to correct local deformations in high-resolution ultra-wide field-of-view (UWFV) fluorescein angiogram (FA) sequences of the retina. The algorithm is able to cope with peripheral blurring, severe occlusions, presence of retinal pathologies and the change of image content due to the perfusion of the fluorescein dye in time. We have used the computational power of a graphics processor to increase the performance of the most computationally expensive parts of the algorithm by a factor of over × 1300, enabling the algorithm to register a pair of 3900 × 3072 UWFV FA images in 5-10 min instead of the 5-7 h required using only the CPU. We demonstrate accurate results on real data with 267 image pairs from a total of 277 (96.4%) graded as correctly registered by a clinician and 10 (3.6%) graded as correctly registered with minor errors but usable for clinical purposes. Quantitative comparison with state-of-the-art intensity-based and feature-based registration methods using synthetic data is also reported. We also show some potential usage of a correctly aligned sequence for vein/artery discrimination and automatic lesion detection.     

Copper@ZIF-8 Core-Shell Nanowires for Reusable Antimicrobial Face Masks

SARS-CoV-2 and other respiratory viruses spread via aerosols generated by infected people. Face masks can limit transmission. However, widespread use of disposable masks consumes tremendous resources and generates waste. Here, a novel material for treating blown polypropylene filtration media used in medical-grade masks to impart antimicrobial activity is reported. To produce thin copper@ZIF-8 core-shell nanowires (Cu@ZIF-8 NWs), Cu NWs are stabilized using a pluronic F-127 block copolymer, followed by growth of ZIF-8 to obtain uniform core-shell structures. The Cu@ZIF-8 NWs are applied to filtration media by dip coating. Aerosol filtration efficiency decreases upon exposure to ethanol (solvent for dip-coating), but increases with addition of Cu@ZIF-8 NWs. Cu@ZIF-8 NWs shows enhanced antibacterial activity, compared to Cu NWs or ZIF-8 alone, against Streptococcus mutans and Escherichia coli. Antiviral activity against SARS-CoV-2 is assayed using virus-infected Vero E6 cells, demonstrating 55% inhibition of virus replication after 48 h by 1 µg of Cu@ZIF-8 NWs per well. Cu@ZIF-8 NWs’ cytotoxicity is tested against four cell lines, and their effect on inflammatory response in A549 cells is examined, demonstrating good biocompatibility. This low-cost, scalable synthesis and straightforward deposition of Cu@ZIF-8 NWs onto filter media has great potential to reduce disease transmission, resource consumption, and environmental impact of waste.