Anatomical distribution of heavy metals in the scallop Pecten maximus

This paper studied the anatomical distribution of mercury (Hg), cadmium (Cd), lead (Pb), chromium (Cr), nickel (Ni), arsenic (As), silver (Ag), copper (Cu) and zinc (Zn) in the scallop Pecten maximus and the possible implications in terms of shellfish management. Six organs were analysed: mantle, gills, foot, digestive gland, kidney and gonad. On the basis of their anatomical distribution, two groups of metals were able to be distinguished: the first included Pb, Hg, Ni, Zn and Ag; and the second comprised the four other metals studied. The metals in the first group preferentially accumulated in the kidney (except for Pb), with generally much lower concentrations in the other organs. The metals in the second group accumulated mainly in the digestive gland. As and Cu were included in the second group, but they also had particular inter-organ distribution characteristics. Among the edible organs of the scallop only the adductor muscle contained important proportions of one metal, As (which is very likely accumulated as a non-toxic derivative). A selective evisceration of the metal rich non-edible organs may therefore be considered a reliable measure to be taken with a view to reduce the metal content of scallops used for human consumption. This could be especially relevant for Cd, which is accumulated in high concentrations in the digestive gland.     

How to Attain Ultralow Interfacial Tension and Three-Phase Behavior with Surfactant Formulation for Enhanced Oil Recovery: A Review. Part 4: Robustness of the Optimum Formulation Zone Through the Insensibility to Some Variables and the Occurrence of Complex Artifacts

In enhanced oil recovery, not only the low-tension performance, but also the robustness at optimum formulation is an important issue. The fourth part of our review series is dedicated to robustness, defined as the width of the zone exhibiting three-phase behavior around the optimum formulation, whatever the scanned variable. It is first corroborated from a screening of the available data in the literature that the tension minimum is inversely proportional to the square of the three-phase range in the HLD scale. However, since there is still an inaccuracy of about a factor 10 in the tension minimum, some significant improvement can be attained in some cases by increasing the three-phase behavior width in two ways. The first approach consists of finding systems that are insensitive to some formulation variable such as temperature, surfactant mixture composition or concentration, and water-to-oil ratio. The second way is to produce an artifact through which the optimum formulation is produced twice in a scan. If the distance between the two events in the scan is reduced down to be zero, their corresponding three-phase behavior zones merge and result in a wider WIII region with a low tension. Several cases of such events are reported: alkaline scans, anionic-nonionic and anionic-cationic mixture changes, linear change in composition in three-surfactant mixture, partial precipitation from a surfactant mixture in a salinity scan, and excessive partitioning of polyethoxylated nonionics. More complex transitions with three effects in a single scan or three concomitantly scanned variables show even more possibilities in practice.     

Methylene blue adsorption by chemically activated waste pork bones

Bone is an inorganic template containing organic material inside which can be converted into hydroxyapatite‐rich material by pyrolysis. Nowadays, there is a growing research interest in the use of hydroxyapatite, the chemical formula of which is Ca₁₀(PO₄)₆(OH)₂. In the present work, pork bone, an abundant biomass source and food waste, has been converted into structured porous hydroxyapatite by a three‐step process including precharring under mild conditions, chemical activation, and thermal activation. The investigated activating agents were NaOH, KOH, K₂CO₃, H₂SO₄, and H₃PO₄. A thorough investigation of the influence of different activating protocols on the chemical and textural properties of the produced material was carried out by nitrogen adsorption–desorption at 77 K, potentiometric titrations, Fourier transform infrared, and X‐ray diffraction techniques. Chemical activation with NaOH, K₂CO₃, and H₂SO₄ increased the specific surface area up to 53%. H₃PO₄ reduced both surface area and pore volume, and KOH showed little influence on the pore structure. The produced materials were evaluated by methylene blue adsorption tests and showed significant improvement as a result of chemical activation. As a main effect, acid treatment increased methylene blue adsorption kinetics, probably owing to an increase in micropororosity, whereas alkali activation enhanced the adsorption capacity of the resultant biochar.     

Effect of a novel soy fermented product enriched with isoflavones and calcium on bone tissue of rats

The objective was to evaluate the effect of soy fermented product intake on the corporal weight and bone tissue of ovariectomized mature rats. This product was fermented with Enterococcus faecium and Lactobacillus jugurti and enriched with isoflavones and calcium. The animals were divided in 5 groups: sham-ovariectomized; ovariectomized; ovariectomized treated with soy fermented product enriched with isoflavones and calcium; ovariectomized treated with soy fermented product enriched with calcium and ovariectomized treated with non-fermented product enriched only with calcium. In order to evaluate the effect of the tested product on bone tissue (femur and tibia), the following parameters were analyzed: length; mechanical assay of three points; density (Archimedes principle); mineral content; calcium content; measure of the trabecular widths. The corporal weight of group treated with soy fermented product containing isoflavones and calcium showed no statistical difference from sham-ovariectomized group and trabecular widths tended to have larger than ovariectomized group. However, there was no significant difference to the other evaluated parameters in result of the diverse treatments. Thus, soy fermented product enriched with isoflavones and calcium inhibited the increasing of corporal weight caused by ovariectomy and revealed a tendency to trabecular protection after castration.     

Active nano-CuPt3 electrocatalyst supported on graphene for enhancing reactions at the cathode in all-vanadium redox flow batteries

Graphene-supported monometallic (Pt) and bimetallic (CuPt₃) cubic nanocatalysts have been investigated as new positive electrode materials for improving the VO₂⁺/VO²⁺ redox process occurring in the vanadium redox flow batteries (VRB). High-resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM) have been employed to characterize the electrodes. The presence of the CuPt₃ nanocubes on graphene conferred higher electrocatalytic activity due to the much higher electroactive area compared to that obtained with the Pt nanoparticles. The electrochemical surface area of the nano-(CuPt₃)-decorated graphene electrode was 105% higher compared to non-decorated graphene, being then a promising alternative for improving the VRB.     

Doxycycline Decreases Atherosclerotic Lesions in the Aorta of ApoE-⁄- and Ovariectomized Mice with Correlation to Reduced MMP-2 Activity

Atherogenic events promote changes in vessel walls, with alteration of the redox state, and increased activity of matrix metalloproteinases (MMPs). Thus, this study aims to evaluate aortic remodeling, MMP activity, and reactive oxygen species (ROS) levels after treatment with doxycycline in ApoE^-⁄- and ovariectomized mice (OVX). Female ApoE^-⁄--knockout mice (5 weeks) were submitted to ovariectomy surgery to induce experimental menopause. They then received chow enriched with 1% cholesterol to induce hypercholesterolemia. The animals were divided into two experimental groups: ApoE^-⁄-/OVX vehicle and ApoE^-⁄-/OVX doxycycline (30 mg/kg) administered by gavage once a day for 28 days (15th to the 18th week of life). Blood samples were collected to measure total cholesterol and fractions. The aorta was used for morphometry and to measure the activity and expression of MMP-2 and ROS levels. The ApoE^-⁄-/OVX doxycycline group showed no change in total and fraction cholesterol levels. However, there was a reduction in ROS levels, MMP-2 expression, and activity that correlated with a decrease in atherosclerotic lesions relative to the ApoE^-⁄-/OVX vehicle (p > 0.05). Therefore, we conclude that doxycycline in ApoE^-⁄-/OVX animals promotes a reduction in atherosclerotic lesions by reducing ROS and MMP-2 activity and expression.     

Expression of SLC26A9 in Airways and Its Potential Role in Asthma

SLC26A9 is an epithelial anion transporter with a poorly defined function in airways. It is assumed to contribute to airway chloride secretion and airway surface hydration. However, immunohistochemistry showing precise localization of SLC26A9 in airways is missing. Some studies report localization near tight junctions, which is difficult to reconcile with a chloride secretory function of SLC26A9. We therefore performed immunocytochemistry of SLC26A9 in sections of human and porcine lungs. Obvious apical localization of SLC26A9 was detected in human and porcine superficial airway epithelia, whereas submucosal glands did not express SLC26A9. The anion transporter was located exclusively in ciliated epithelial cells. Highly differentiated BCi-NS1 human airway epithelial cells grown on permeable supports also expressed SLC26A9 in the apical membrane of ciliated epithelial cells. BCi-NS1 cells expressed the major Cl⁻ transporting proteins CFTR, TMEM16A and SLC26A9 in about equal proportions and produced short-circuit currents activated by increases in intracellular cAMP or Ca²⁺. Both CFTR and SLC26A9 contribute to basal chloride currents in non-stimulated BCi-NS1 airway epithelia, with CFTR being the dominating Cl⁻ conductance. In wtCFTR-expressing CFBE human airway epithelial cells, SLC26A9 was partially located in the plasma membrane, whereas CFBE cells expressing F508del-CFTR showed exclusive cytosolic localization of SLC26A9. Membrane localization of SLC26A9 and basal chloride currents were augmented by interleukin 13 in wild-type CFTR-expressing cells, but not in cells expressing the most common disease-causing mutant F508del-CFTR. The data suggest an upregulation of SLC26A9-dependent chloride secretion in asthma, but not in the presence of F508del-CFTR.     

Structural Analysis of the Black-Legged Tick Saliva Protein Salp15

Salp15 is one of the proteins in the saliva of the tick Ixodes scapularis. Together with other biomolecules injected into the mammalian host at the biting site, it helps the tick to sustain its blood meal for days. Salp15 interferes with the cellular immune response of the mammalian host by inhibiting the activation of CD4⁺ T-lymphocytes. This function is co-opted by pathogens that use the tick as a vector and invade the host when the tick bites, such as Borrelia burgdorferi, the causative agent of Lyme borreliosis. Because of the immunity-suppressing role of Salp15, it has been proposed as a candidate for therapeutic applications in disorders of the immune system. The protein is produced as a 135-residue long polypeptide and secreted without its N-terminal signal 1–21 sequence. Detailed structural studies on Salp15 are lacking because of the difficulty in producing large amounts of the folded protein. We report the production of Salp15 and its structural analysis by NMR. The protein is monomeric and contains a flexible N-terminal region followed by a folded domain with mixed α + β secondary structures. Our results are consistent with a three-dimensional structural model derived from AlphaFold, which predicts the formation of three disulfide bridges and a free C-terminal cysteine.     

Characterization and corrosion protection properties of polypyrrole / montmorillonite electropolymerized onto aluminium alloy 1100

Films of Polypyrrole/Montmorillonite (PPy/MT) clays were electropolymerized potentiostatically on aluminium alloy 1100, using sodium dodecylbenzenesulfonate (SDBS) as a dopant. Two clay species were used: Na⁺-Montmorillonite (MT-Na) and modified-Montmorillonite (MT-M). The characterization of the PPy/MT films performed by XRD and TEM shows that the exfoliation method employed, as well the electrochemical polymerization method used in this work, allow nanocomposite materials to be obtained. The PPy/MT films were found to have less electrical conductivity than pure PPy. The corrosion protection of aluminium alloy 1100 covering PPy/MT was evaluated by electrochemical techniques in 0.05 mol L⁻¹ NaCl medium. The electrochemical parameters derived from the polarization curves, together with the EIS data, revealed that the corrosion resistance of PPy/clay coatings depends on the type and concentration of Montmorillonite employed. The best performance in the corrosion protection of the aluminum was achieved with PPy/MT films containing 1% of clay.