How to Attain Ultralow Interfacial Tension and Three-Phase Behavior with Surfactant Formulation for Enhanced Oil Recovery: A Review. Part 4: Robustness of the Optimum Formulation Zone Through the Insensibility to Some Variables and the Occurrence of Complex Artifacts

In enhanced oil recovery, not only the low-tension performance, but also the robustness at optimum formulation is an important issue. The fourth part of our review series is dedicated to robustness, defined as the width of the zone exhibiting three-phase behavior around the optimum formulation, whatever the scanned variable. It is first corroborated from a screening of the available data in the literature that the tension minimum is inversely proportional to the square of the three-phase range in the HLD scale. However, since there is still an inaccuracy of about a factor 10 in the tension minimum, some significant improvement can be attained in some cases by increasing the three-phase behavior width in two ways. The first approach consists of finding systems that are insensitive to some formulation variable such as temperature, surfactant mixture composition or concentration, and water-to-oil ratio. The second way is to produce an artifact through which the optimum formulation is produced twice in a scan. If the distance between the two events in the scan is reduced down to be zero, their corresponding three-phase behavior zones merge and result in a wider WIII region with a low tension. Several cases of such events are reported: alkaline scans, anionic-nonionic and anionic-cationic mixture changes, linear change in composition in three-surfactant mixture, partial precipitation from a surfactant mixture in a salinity scan, and excessive partitioning of polyethoxylated nonionics. More complex transitions with three effects in a single scan or three concomitantly scanned variables show even more possibilities in practice.     

Isolation and Characterization of Microsatellite Markers for Passiflora contracta

Passiflora contracta Vitta (Passifloraceae) is an endemic species of the Atlantic Rainforest, one of the most species-rich ecoregions in the world, although extremely endangered. We have developed an enriched microsatellite library in order to fine-scale studies of the genetic structure of P. contracta. Twelve pairs of microsatellite primers were designed, and seven loci were successfully amplified and characterized by genotyping two wild populations of P. contracta. All seven loci were polymorphic, with an average number of alleles found being 4.8 and 5 per population. The cross-species transferability was tested using sister species Passiflora ovalis Vell. Ex Roemer. The development of these markers will contribute to the studies of population genetics in P. contracta as well as future studies concerning diversity patterns in the Atlantic Rainforest, and may also help to establish strategies for the conservation of this species.     

Thermal aging of Pd/Pt/Rh automotive catalysts under a cycled oxidizing–reducing environment

Mono- and multi-metallic (bi- and tri-) Pt, Pd and Rh supported on cerium-promoted alumina (La Roche, SAS-1/16) catalysts were tested for activity as TWC, both fresh [G.C. Koltsakis, and A.M. Stamatelos, Progr. Energy Combust. Sci. 23 (1997) 1] and after accelerated aging. Aging consisted of a treatment at 900°C for 5 h during which an oxidizing (2.5% O₂, 10% H₂O, in N₂) and a reducing (5.0% CO, 10% H₂O, in N₂) feedstream were cycled at 0.017 Hz through the catalyst. Activity tests were carried out by increasing temperature from 100 to 600°C at 3°C min⁻¹, while two oxidizing and reducing (±0.5 A/F) feedstreams were alternately (1 Hz) fed through the reactor at 125 000 h⁻¹ (STP). Conversion was continuously analyzed. Light-off temperature, T₅₀, conversion at 500°C (normal running temperature), X₅₀₀, and the stoichiometric window (A/F from 14.13 to 15.13) for stationary feedstreams, were determined.     

Preparation,alumina-pillaring and oxidation catalytic performances of synthetic Ni-saponite

Synthetic saponite containing Ni²⁺ as octahedral cations has been prepared by a simple hydrothermal procedure, and has been intercalated with Al₁₃-polycations. The catalytic performance of the pillared solids in the epoxidation of (Z)-cyclooctene and the oxidation of cyclohexanone in the presence of benzonitrile, Baeyer–Villiger reaction, using hydrogen peroxide (70%) as a clean oxidant have been studied. For comparison, Mg-saponite was synthesized under the same conditions and tested for the same reaction.     

Improving the properties of LDPE/glass fiber composites with silanized-LDPE

Low density polyethylene (LDPE) is a widely used thermoplastic. The dispersion of inorganic fillers in thermoplastic matrices such as polyethylene has been largely employed to improve some of its properties. However, interaction between both components is a major issue so the presence of a coupling agent is usually necessary to increase the interaction among the phases. In this study, LDPE chemically modified with vinyltriethoxysilane (VTES) was used as a coupling agent in glass fiber-reinforced LDPE. The composites were prepared in a mixing chamber and subsequently analyzed by tensile tests, rotational rheometry, and scanning electron microscopy (SEM). The mechanical properties were significantly increased by the use of small amounts of the coupling agent. Moreover, the rheological behavior and the SEM micrographs showed higher interaction between the matrix and the reinforcing phase in the composites containing LDPE modified with VTES, confirming the suitability of using this coupling agent in these systems. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

The effect of flow arrangement on the pressure drop of plate heat exchangers

For the optimal design of plate heat exchangers (PHEs), an accurate thermal-hydraulic model that takes into account the effect of the flow arrangement on the heat load and pressure drop is necessary. In the present study, the effect of the flow arrangement on the pressure drop of a PHE is investigated. Thirty two different arrangements were experimentally tested using a laboratory scale PHE with flat plates. The experimental data was used for (a) determination of an empirical correlation for the effect of the number of passes and number of flow channels per pass on the pressure drop; (b) validation of a friction factor model through parameter estimation; and (c) comparison with the simulation results obtained with a CFD (computational fluid dynamics) model of the PHE. All three approaches resulted in a good agreement between experimental and predicted values of pressure drop. Moreover, the CFD model is used for evaluating the flow maldistribution in a PHE with two channels per pass.     

Effects of H<Subscript>2</Subscript> Atmospheres on Sintering of Low Alloy Steels Containing Oxygen-Sensitive Masteralloys

Processing of novel sintered steels with compositions including oxygen-sensitive elements requires deep understanding of the chemistry of sintering. The use of H₂ atmospheres alleviates the oxygen transference from the base powder to the oxygen-sensitive particles. However, in H₂, methane formation at 700–1200°C causes dramatic homogeneous decarburization of the part that affects both mechanical behavior and dimensional stability. The intensity and the critical temperatures of this effect depend strongly on the alloying elements, being significantly enhanced in presence of Si. When combining the alloying elements as Fe-Mn-Si masteralloys, methane formation is enhanced around 760°C due to the high Mn content (40 wt.%) in the masteralloys. Nevertheless, the benefits of H₂ towards oxide reduction can still be advantageously used if diluting it in the form of N₂-H₂ atmospheres, or if limiting the use of H₂ to temperatures below 500°C. Thus, decarburization due to methane formation can be successfully controlled.     

Imidazolium salts as liquid coupling agents for the preparation of polypropylene‐silica composites

This article describes the application of ionic liquid 1‐decyl‐3‐methylimidazolium tetrafluoroborate in the preparation of polypropylene‐silica composites. The sol‐gel technology was used to prepare xerogel silica‐ionic liquid hybrid S1 , which was obtained as a free flowing powder of aggregated spherical particles. Ionic liquid free silica S2 was obtained by extraction and calcination of S1 . Melt blending of isotactic polypropylene with S1 and S2 afforded the composites C1 (with ionic liquid) and C2 (without ionic liquid), respectively. The presence of ionic liquid on the S1 silica surface promoted significantly improved silica dispersion in the polymer matrix and prevented compression of the silica particles. Furthermore, the crystallization temperature of composite C1 was significantly higher, which indicated that silica‐ionic liquid filler S1 acted as nucleating agent. The resistance to thermal decomposition of both composites was increased, but this was higher in the presence of ionic liquid. These results show that liquid salts can function as coupling agents and compatibalizers for the preparation of polymeric composites with differentiated properties. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010