How to Attain Ultralow Interfacial Tension and Three-Phase Behavior with Surfactant Formulation for Enhanced Oil Recovery: A Review. Part 4: Robustness of the Optimum Formulation Zone Through the Insensibility to Some Variables and the Occurrence of Complex Artifacts

In enhanced oil recovery, not only the low-tension performance, but also the robustness at optimum formulation is an important issue. The fourth part of our review series is dedicated to robustness, defined as the width of the zone exhibiting three-phase behavior around the optimum formulation, whatever the scanned variable. It is first corroborated from a screening of the available data in the literature that the tension minimum is inversely proportional to the square of the three-phase range in the HLD scale. However, since there is still an inaccuracy of about a factor 10 in the tension minimum, some significant improvement can be attained in some cases by increasing the three-phase behavior width in two ways. The first approach consists of finding systems that are insensitive to some formulation variable such as temperature, surfactant mixture composition or concentration, and water-to-oil ratio. The second way is to produce an artifact through which the optimum formulation is produced twice in a scan. If the distance between the two events in the scan is reduced down to be zero, their corresponding three-phase behavior zones merge and result in a wider WIII region with a low tension. Several cases of such events are reported: alkaline scans, anionic-nonionic and anionic-cationic mixture changes, linear change in composition in three-surfactant mixture, partial precipitation from a surfactant mixture in a salinity scan, and excessive partitioning of polyethoxylated nonionics. More complex transitions with three effects in a single scan or three concomitantly scanned variables show even more possibilities in practice.     

Effect of a novel soy fermented product enriched with isoflavones and calcium on bone tissue of rats

The objective was to evaluate the effect of soy fermented product intake on the corporal weight and bone tissue of ovariectomized mature rats. This product was fermented with Enterococcus faecium and Lactobacillus jugurti and enriched with isoflavones and calcium. The animals were divided in 5 groups: sham-ovariectomized; ovariectomized; ovariectomized treated with soy fermented product enriched with isoflavones and calcium; ovariectomized treated with soy fermented product enriched with calcium and ovariectomized treated with non-fermented product enriched only with calcium. In order to evaluate the effect of the tested product on bone tissue (femur and tibia), the following parameters were analyzed: length; mechanical assay of three points; density (Archimedes principle); mineral content; calcium content; measure of the trabecular widths. The corporal weight of group treated with soy fermented product containing isoflavones and calcium showed no statistical difference from sham-ovariectomized group and trabecular widths tended to have larger than ovariectomized group. However, there was no significant difference to the other evaluated parameters in result of the diverse treatments. Thus, soy fermented product enriched with isoflavones and calcium inhibited the increasing of corporal weight caused by ovariectomy and revealed a tendency to trabecular protection after castration.     

Active nano-CuPt3 electrocatalyst supported on graphene for enhancing reactions at the cathode in all-vanadium redox flow batteries

Graphene-supported monometallic (Pt) and bimetallic (CuPt₃) cubic nanocatalysts have been investigated as new positive electrode materials for improving the VO₂⁺/VO²⁺ redox process occurring in the vanadium redox flow batteries (VRB). High-resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM) have been employed to characterize the electrodes. The presence of the CuPt₃ nanocubes on graphene conferred higher electrocatalytic activity due to the much higher electroactive area compared to that obtained with the Pt nanoparticles. The electrochemical surface area of the nano-(CuPt₃)-decorated graphene electrode was 105% higher compared to non-decorated graphene, being then a promising alternative for improving the VRB.     

Multi‐element characterisation of carob,fig and almond liqueurs by MP‐AES

Carob pod, fig and almond liqueurs are produced in various Mediterranean regions. This work reports the mineral content of these traditional beverages and evaluates the influence of the raw material. Twenty‐five fruit liqueurs from 16 producers were analysed. A simple open‐vessel sample mineralization by wet digestion using nitric acid–hydrogen peroxide (1:1) was used before spectrometric analysis. Nine essential elements (Cu, Ca, Mg, Na, K, Fe, Zn, Mn and P) and two non‐essentials (Cd and Pb) were quantified by microwave plasma–atomic emission spectrometry (MP‐AES). Carob liqueur presented the broader profile of minerals and was the only fruit liqueur containing iron (72.7% of samples), phosphorous, manganese and low levels of lead (in two of the 11 samples). Conversely, almond liqueurs contained the lowest mineral content with only five elements detected. Fruit liqueurs showed variability in mineral content even within the same liqueur, presumably as a consequence of the different manufacturing processes. Despite this variability, application of principal component analysis to essential mineral concentrations (K, Na, Ca, Mg, Mn, Fe and Zn) resulted in satisfactory classification (PC1 and PC2 accounting for 78.5% of the total variance) of the Portuguese liqueurs evaluated. Copyright © 2018 The Institute of Brewing & Distilling     

Protecting the Melatonin Rhythm through Circadian Healthy Light Exposure

Currently, in developed countries, nights are excessively illuminated (light at night), whereas daytime is mainly spent indoors, and thus people are exposed to much lower light intensities than under natural conditions. In spite of the positive impact of artificial light, we pay a price for the easy access to light during the night: disorganization of our circadian system or chronodisruption (CD), including perturbations in melatonin rhythm. Epidemiological studies show that CD is associated with an increased incidence of diabetes, obesity, heart disease, cognitive and affective impairment, premature aging and some types of cancer. Knowledge of retinal photoreceptors and the discovery of melanopsin in some ganglion cells demonstrate that light intensity, timing and spectrum must be considered to keep the biological clock properly entrained. Importantly, not all wavelengths of light are equally chronodisrupting. Blue light, which is particularly beneficial during the daytime, seems to be more disruptive at night, and induces the strongest melatonin inhibition. Nocturnal blue light exposure is currently increasing, due to the proliferation of energy-efficient lighting (LEDs) and electronic devices. Thus, the development of lighting systems that preserve the melatonin rhythm could reduce the health risks induced by chronodisruption. This review addresses the state of the art regarding the crosstalk between light and the circadian system.     

Applications of Plasma-Activated Water in Dentistry: A Review

The activation of water by non-thermal plasma creates a liquid with active constituents referred to as plasma-activated water (PAW). Due to its active constituents, PAW may play an important role in different fields, such as agriculture, the food industry and healthcare. Plasma liquid technology has received attention in recent years due to its versatility and good potential, mainly focused on different health care purposes. This interest has extended to dentistry, since the use of a plasma–liquid technology could bring clinical advantages, compared to direct application of non-thermal atmospheric pressure plasmas (NTAPPs). The aim of this paper is to discuss the applicability of PAW in different areas of dentistry, according to the published literature about NTAPPs and plasma–liquid technology. The direct and indirect application of NTAPPs are presented in the introduction. Posteriorly, the main reactors for generating PAW and its active constituents with a role in biomedical applications are specified, followed by a section that discusses, in detail, the use of PAW as a tool for different oral diseases.     

Recyclable,Flexible, Low‐Power Oxide Electronics

The ability to process and dimensionally scale field‐effect transistors with and on paper and to integrate them as a core component for low‐power‐consumption analog and digital circuits is demonstrated. Low‐temperature‐processed p‐ and n‐channel integrated oxide thin‐film transistors in the complementary metal oxide semiconductor (CMOS) inverter architecture are seamlessly layered on mechanically flexible, low‐cost, recyclable paper substrates. The possibility of building these circuits using low‐temperature processes opens the door to new applications ranging from smart labels and sensors on clothing and packaging to electronic displays printed on paper pages for use in newspapers, magazines, books, signs, and advertising billboards. Because the CMOS circuits reported constitute fundamental building blocks for analog and digital electronics, this development creates the potential to have flexible form factor computers seamlessly layered onto paper. The holistic approach of merging low‐power circuitry with a recyclable substrate is an important step towards greener electronics.     

Characterization and corrosion protection properties of polypyrrole / montmorillonite electropolymerized onto aluminium alloy 1100

Films of Polypyrrole/Montmorillonite (PPy/MT) clays were electropolymerized potentiostatically on aluminium alloy 1100, using sodium dodecylbenzenesulfonate (SDBS) as a dopant. Two clay species were used: Na⁺-Montmorillonite (MT-Na) and modified-Montmorillonite (MT-M). The characterization of the PPy/MT films performed by XRD and TEM shows that the exfoliation method employed, as well the electrochemical polymerization method used in this work, allow nanocomposite materials to be obtained. The PPy/MT films were found to have less electrical conductivity than pure PPy. The corrosion protection of aluminium alloy 1100 covering PPy/MT was evaluated by electrochemical techniques in 0.05 mol L⁻¹ NaCl medium. The electrochemical parameters derived from the polarization curves, together with the EIS data, revealed that the corrosion resistance of PPy/clay coatings depends on the type and concentration of Montmorillonite employed. The best performance in the corrosion protection of the aluminum was achieved with PPy/MT films containing 1% of clay.     

A Review of Pathways for Building Fire Spread in the Wildland Urban Interface Part II: Response of Components and Systems and Mitigation Strategies in the United States

Structure loss in wildland fires has significantly increased over the past few decades, affected by increased development in rural areas, changing fuel management policies, and climate change, all of which are projected to increase in the future. This paper is Part II of a two-part review, which presents a summary of fundamental and applied research on pathways to fire spread in the wildland urban interface. Part I discussed the fundamentals of wildland fire spread via radiative heat transfer, direct flame contact, and firebrand exposure. Here in Part II, we cover the response of building components and systems, as well as mitigation strategies used to prevent fire spread into and within communities in the United States. Post-fire investigations, full-scale structural testing, individual component testing, and combined systems or assembly testing have been used to identify building component and system vulnerabilities such as roofs, vents, siding, decks, fences, and mulch. Using results from these tests and investigations at different scales, some knowledge has been gained on specific vulnerabilities and the effectiveness of mitigation strategies, but a quantitative framework has not yet been established. On a community level, the layout of structures and the space between them has been shown to be incredibly important in mitigating wildfire risk. More locally, defensible space around homes has been effective in mitigating exposure from both radiation and direct flame contact. Firebrands still remain a challenge; however, many design recommendations have been proposed to harden structures against firebrand exposures. Recommendations for future research and development are also presented.     

A case-based approach for coordinated action selection in robot soccer

Designing coordinated robot behaviors in uncertain, dynamic, real-time, adversarial environments, such as in robot soccer, is very challenging. In this work we present a case-based reasoning approach for cooperative action selection, which relies on the storage, retrieval, and adaptation of example cases. We focus on cases of coordinated attacking passes between robots in the presence of the defending opponent robots. We present the case representation explicitly distinguishing between controllable and uncontrollable indexing features, corresponding to the positions of the team members and opponent robots, respectively. We use the symmetric properties of the domain to automatically augment the case library. We introduce a retrieval technique that weights the similarity of a situation in terms of the continuous ball positional features, the uncontrollable features, and the cost of moving the robots from the current situation to match the case controllable features. The case adaptation includes a best match between the positions of the robots in the past case and in the new situation. The robots are assigned an adapted position to which they move to maximize the match to the retrieved case. Case retrieval and reuse are achieved within the distributed team of robots through communication and sharing of own internal states and actions. We evaluate our approach, both in simulation and with real robots, in laboratory scenarios with two attacking robots versus two defending robots as well as versus a defender and a goalie. We show that we achieve the desired coordinated passing behavior, and also outperform a reactive action selection approach.