Effect of the type of nylon chain‐end on the compatibilization of PP/PP‐GMA/nylon 6 blends

Polyamide and polypropylene (PP) are two important classes of commercial polymers; however, their direct mixing leads to incompatible blends with poor properties. Polypropylene functionalized with glycidyl methacrylate (PP‐GMA) was used as a compatibilizer in blends of PP and nylon 6, because of the possible reaction of ? NH₂ and ? COOH groups with the epoxide group of GMA. Two types of nylon 6 with different ratios between ? NH₂ and ? COOH groups were used. The one with higher concentration of ? COOH groups was less compatible with PP in a binary blend. When PP‐GMA was used as a compatibilizer, a better dispersion of nylon in the PP matrix was obtained together with better mechanical properties for both nylons used in this work. © 2001 Society of Chemical Industry     

ALKYD PAINT WASTE CHARACTERIZATION AND DISTILLATION

In the present study the characterization and distillation of alkyd paint waste have been carried out in order to establish the technical viability of organic solvents recovery and to decide upon the best environmental management for the waste stream from a paint spray-booth application in an automotive component factory. The paint is a black primer based on an alkyd resin with toluene and xylene as solvents, black carbon as pigment, fillers, and other minor components.

The paint, paint wastes, and distillation wastes have been characterized by determination of the physicochemical properties of the solid (solvents content and flash point) and determination of ecotoxicity (EC₅₀), total organic carbon (TOC), and metals concentration of the leachates. The highly volatile matter (HVM) content, determined by the weight loss at 200°C, has been used as a parameter to relate with the hazardous wastes regulations based on the characterization parameters EC₅₀, TOC, and flash point.

Distillation experiments have been performed in a simple batch mode with mixtures of paint waste, water, and additives in order to obtain high efficiencies in the recovery of volatile organic compounds and to obtain a final solid with nonhazardous behavior and good manageability qualities. A fractional factorial design (2^3-1) of experiments was carried out in order to study the influence of the distillation variables: water/paint waste ratio (2/1-3/1 (g/g)), temperature (110°-145°C), alkaline additives (Na(OH),CaO, Ca(OH)₂), and amount of other additives (wt.% of bentonite, cement, and Ca(OH)₂) on the solvent recovery, [% VOCs]_Recovery, on the residual volatile organic compounds, [% VOCs]_{Distillation Waste}, and on the total organic content (TOC) of the waste leachates. The present work shows the quantitative results of the alkyd paint waste distillation process under optimum conditions.     

HumanTop: a multi-object tracking tabletop

In this paper, a computer vision based interactive multi-touch tabletop system called HumanTop is introduced. HumanTop implements a stereo camera vision subsystem which allows not only an accurate fingertip tracking algorithm but also a precise touch-over-the-working surface detection method. Based on a pair of visible spectra cameras, a novel synchronization circuit makes the camera caption and the image projection independent from each other, providing the minimum basis for the development of computer vision analysis based on visible spectrum cameras without any interference coming from the projector. The assembly of both cameras and the synchronization circuit is not only capable of performing an ad-hoc version of a depth camera, but it also introduces the recognition and tracking of textured planar objects, even when contents are projected over them. On the other hand HumanTop supports the tracking of sheets of paper and ID-code markers. This set of features makes the HumanTop a comprehensive, intuitive and versatile augmented tabletop that provides multitouch interaction with projective augmented reality on any flat surface. As an example to exploit all the capabilities of HumanTop, an educational application has been developed using an augmented book as a launcher to different didactic contents. A pilot study in which 28 fifth graders participated is presented. Results about efficiency, usability/satisfaction and motivation are provided. These results suggest that HumanTop is an interesting platform for the development of educational contents.     

Health benefits of CLA – lessons from pig models in biomedical research

The objective of this review is to highlight the use of pig models for investigating safety, efficacy and the mechanisms of action of conjugated linoleic acid (CLA). Although CLA elicits positive effects in animal models and in vitro systems, a consistent concern in terms of translational research is that the health benefits observed by using these model systems cannot be extrapolated directly into humans. Conversely, the similarities between pigs and humans make the pig an ideal model for examining the health benefits of dietary supplements, functional foods and nutraceuticals. We have developed pig models of viral and bacterial infection to examine the preventive role of dietary CLA supplementation on virally induced immunosuppression and gut health, respectively. Results from these studies indicate that CLA significantly enhances the immune function while limiting the catabolic effects of uncontrolled immune and inflammatory responses. The scientific findings in pig models and human clinical trials demonstrate that CLA modulates immune responses in pigs and humans. Pig models of immunomodulation represent significant improvements over other animal models and in vitro systems because they mimic more closely the compartmentalization of the human immune system and the clinical presentation of human infectious, immune and inflammatory diseases.     

Iron recovery from zinc mine tailings by magnetic separation followed by carbothermal reduction of self‐reducing briquettes

The volume of tailings produced by the extractive industry has been increasing due to the processing of the low‐grade ore. This issue can cause environmental accidents and require significant investment to control the disposal of tailings. Therefore, this study aims to recover iron from zinc mine tailings by wet magnetic separation followed by the carbothermal reduction of self‐reducing briquettes. Two magnetic separation routes were investigated to concentrate iron. Zinc mine tailings were processed by route I, in a rougher stage followed by a scavenger stage; and route II, in a rougher stage followed by a cleaner stage. The carbothermal reductions were performed using self‐reducing briquettes composed of Fe concentrate from the route with high Fe content and charcoal. The products were analyzed by scanning electron microscopy with energy dispersive spectroscopy (SEM‐EDS), x‐ray diffraction (XRD), inductively coupled plasma optical emission spectrometry (ICP‐OES), and volumetric chemical analysis. Magnetic separation route II provided the highest‐grade Fe concentrate, 52% Fe, while route I provided 33% Fe. In the carbothermal reductions, a metallization degree of 98% in the Fe concentrate briquette, 97% in the briquette with a 10% replacement of its raw material by Fe concentrate, and 99% in the hematite briquette was reached. The replacement of raw material by Fe concentrate showed no significant change in Fe recovery. Considering the whole process, magnetic separation and carbothermal reduction, the recovery of Fe from the zinc mine tailings was 67%. Therefore, the process route suggested in this study will not only reduce tailings disposal and consequently the risk of environmental accidents, but it will also provide profitable raw material for the steel industry.     

Rheological,thermal and morphological properties of polyethylene terephthalate/polyamide 6/rice husk ash composites

This work deals with the rheological, morphological, and thermal properties of composites having poly(ethylene terephthalate) (PET), polyamide-6 (PA6), and their blends as matrices, and rice husk ash (RHA) as a filler. The study determines the effect of composition on the change in viscosity and rate of degradation during processing in a torque rheometer. Our data indicates that thermal stability and degradation during processing depend on matrix composition and filler concentration. SEM micrographs show both partial adhesion of the filler to the matrices and filler pullout. Optical microscopy shows particle agglomeration and that agglomerate size increased with filler content. FTIR investigates the shifting of absorption bands of PET/PA6 composite after the addition of RHA and attributes the selective dispersion of RHA to the formation of hydrogen bonds. Our data supports the idea that filler employed here is an option to develop polymer composites with improved properties.     

Investigation on the styrene-butadiene rubber cleavage with periodic acid under the influence of ultrasonic radiation

Summary The cleavage of styrene-butadiene rubber (SBR) with periodic acid (H₅IO₆) and simultaneous injection of ultrasonic radiation has been performed. Two frequencies, 25 and 40 kHz, respectively, have been used. The results demonstrate clearly that 40 kHz ultrasound radiation accelerates significantly the cleavage reaction. The Pearl String Model theory had been used to elucidate this process.     

An empirical examination of the sustainability of social bookmarking websites

Given the continuous growth of social bookmarking sites, we investigated the reasons behind their sustainability as online social structures. Bookmarking sites offer users the option to post and tag web resources privately or to make them publicly available to other users of the sites. A prevalence of private tagging would threaten the sustainability of the social aspects at these sites. Using activity data from a sample of 1,000 users of Simpy, a popular social bookmarking site, we found that the majority of users contribute most of their tagged resources to the public repository, despite the option to keep them private. We also found that in social bookmarking sites there is a minority of extremely prolific contributors who are responsible for a large portion of public tagged resources. Finally, we found that new users make larger proportions of their contributions public than existing users and that there is a larger number of regular contributors to the site than irregular ones. All of these findings are consistent with the mechanisms predicted by a theoretical model of sustainable online social structures.     

Active learning through collaborative knowledge building using an automatic free-text scoring system in a b-learning environment

According to active learning, students should be responsible for their own learning. Automatic free-text scoring allows teachers to provide open-ended questions with their correct answers to a computer system, so when students answer the questions, they get immediate feedback (a score, a comment, or both). However, teachers are usually overloaded with many tasks, and they may not have time to create the questions with the correct answers. Therefore, in the 2012/2013 academic year, we asked a group of 124 Pre-Primary and Primary Education students to become the creators of the questions and their correct answers in groups in a free-text scoring system, so the questions use learners’ language, not teachers’ language. From them, 41 students (group of involved students, GIS) fulfilled all the requirements during the course. Our hypothesis was that GIS would be able to increase their academic performance and levels of engagement compared to the rest of the students. The results gathered provide statistic evidence to support that hypothesis. This study pretends to help teachers who want to increase the academic performance and levels of engagement of their students in courses that they may find boring and unrelated to the main topic of their degree, or not directly related with their main academic interests.