Health benefits of CLA – lessons from pig models in biomedical research

The objective of this review is to highlight the use of pig models for investigating safety, efficacy and the mechanisms of action of conjugated linoleic acid (CLA). Although CLA elicits positive effects in animal models and in vitro systems, a consistent concern in terms of translational research is that the health benefits observed by using these model systems cannot be extrapolated directly into humans. Conversely, the similarities between pigs and humans make the pig an ideal model for examining the health benefits of dietary supplements, functional foods and nutraceuticals. We have developed pig models of viral and bacterial infection to examine the preventive role of dietary CLA supplementation on virally induced immunosuppression and gut health, respectively. Results from these studies indicate that CLA significantly enhances the immune function while limiting the catabolic effects of uncontrolled immune and inflammatory responses. The scientific findings in pig models and human clinical trials demonstrate that CLA modulates immune responses in pigs and humans. Pig models of immunomodulation represent significant improvements over other animal models and in vitro systems because they mimic more closely the compartmentalization of the human immune system and the clinical presentation of human infectious, immune and inflammatory diseases.     

Methanol Selective Oxidation to Formaldehyde over Iron-Molybdate Catalysts

This review deals with the important industrial reaction of formaldehyde manufacture by methanol oxidation over iron molybdate catalysts. Detailed reference is made to the used catalyst, preparation techniques (coprecipitation, sol-gel like, mechanical mixing, etc.) including unsupported and supported catalysts, promoters and characterization methods. The controversial active phase assignment (stoichiometric versus Mo rich iron molybdate) is discussed. The proposed reaction mechanisms and kinetic laws for the main and side reactions are examined. The catalyst deactivation processes are reviewed and the role of Mo excess on these processes is underlined. Finally conclusions and perspectives are presented.     

ALKYD PAINT WASTE CHARACTERIZATION AND DISTILLATION

In the present study the characterization and distillation of alkyd paint waste have been carried out in order to establish the technical viability of organic solvents recovery and to decide upon the best environmental management for the waste stream from a paint spray-booth application in an automotive component factory. The paint is a black primer based on an alkyd resin with toluene and xylene as solvents, black carbon as pigment, fillers, and other minor components.

The paint, paint wastes, and distillation wastes have been characterized by determination of the physicochemical properties of the solid (solvents content and flash point) and determination of ecotoxicity (EC₅₀), total organic carbon (TOC), and metals concentration of the leachates. The highly volatile matter (HVM) content, determined by the weight loss at 200°C, has been used as a parameter to relate with the hazardous wastes regulations based on the characterization parameters EC₅₀, TOC, and flash point.

Distillation experiments have been performed in a simple batch mode with mixtures of paint waste, water, and additives in order to obtain high efficiencies in the recovery of volatile organic compounds and to obtain a final solid with nonhazardous behavior and good manageability qualities. A fractional factorial design (2^3-1) of experiments was carried out in order to study the influence of the distillation variables: water/paint waste ratio (2/1-3/1 (g/g)), temperature (110°-145°C), alkaline additives (Na(OH),CaO, Ca(OH)₂), and amount of other additives (wt.% of bentonite, cement, and Ca(OH)₂) on the solvent recovery, [% VOCs]_Recovery, on the residual volatile organic compounds, [% VOCs]_{Distillation Waste}, and on the total organic content (TOC) of the waste leachates. The present work shows the quantitative results of the alkyd paint waste distillation process under optimum conditions.     

SEM and AFM characterization of surface of two RMGICs for degradation before and after modification with bioactive glass ceramic

Objectives: The aim of this study was to evaluate the effect of bioactive glass–ceramic particles (Biosilicate®) addition on surface nanoroughness and topography of Resin-modified glass ionomer cements (RMGICs).

Methods: Experimental materials were made by incorporating 2 wt% of Biosilicate® into Fuji II LC® (FL) and Vitremer® (VT) powders. Disks of RMGICs (with and without Biosilicate®) measuring 0.5 cm (diameter) × 0.5 mm (thickness) were fabricated and polished. Samples were stored at 37 °C in dry or immersed in distilled water for 30 days. Digital images (20 × 20 μm) from the surfaces were obtained by means of an atomic force microscopy. Three images were acquired for each sample, and four nanoroughness measurements were performed in each image. Nanoroughness (Ra, nm) was assessed by Nanoscope Software V7. Data were analyzed with ANOVA and Student–Newman–Keuls multiple comparisons (p < 0.05). SEM images were obtained for surface topography analysis.

Results: FL was significantly rougher than VT (p < 0.05) in wet and dry conditions. The addition of Biosilicate® increased the surface roughness in VT and decreased in FL, regardless of the storage media (p ≤ 0.05). No differences existed between materials and storage conditions after Biosilicate® addition. Significance: The Biosilicate® particles addition produced changes on the surface nanoroughness of the RMGICs. These changes depended on the particles size of the original cements in dry conditions. In water storage, dissolution of the Biosilicate® particles, a silica-rich gel formation, and a hydroxyl carbonate apatite precipitation on the surface of the materials changed the nanoroughness surface. FL was the roughest in both conditions.

Significance: The Biosilicate® particles addition produced changes on the surface nanoroughness of the RMGICs. These changes depended on the particles size of the original cements in dry conditions. In water storage, dissolution of the Biosilicate® particles, a silica-rich gel formation, and a hydroxyl carbonate apatite precipitation on the surface of the materials changed the nanoroughness surface. FL was the roughest in both conditions.     

Polymeric Nanoparticle-Based Photodynamic Therapy for Chronic Periodontitis in Vivo

Antimicrobial photodynamic therapy (aPDT) is increasingly being explored for treatment of periodontitis. Here, we investigated the effect of aPDT on human dental plaque bacteria in suspensions and biofilms in vitro using methylene blue (MB)-loaded poly(lactic-co-glycolic) (PLGA) nanoparticles (MB-NP) and red light at 660 nm. The effect of MB-NP-based aPDT was also evaluated in a clinical pilot study with 10 adult human subjects with chronic periodontitis. Dental plaque samples from human subjects were exposed to aPDT—in planktonic and biofilm phases—with MB or MB-NP (25 µg/mL) at 20 J/cm² in vitro. Patients were treated either with ultrasonic scaling and scaling and root planing (US + SRP) or ultrasonic scaling + SRP + aPDT with MB-NP (25 µg/mL and 20 J/cm²) in a split-mouth design. In biofilms, MB-NP eliminated approximately 25% more bacteria than free MB. The clinical study demonstrated the safety of aPDT. Both groups showed similar improvements of clinical parameters one month following treatments. However, at three months ultrasonic SRP + aPDT showed a greater effect (28.82%) on gingival bleeding index (GBI) compared to ultrasonic SRP. The utilization of PLGA nanoparticles encapsulated with MB may be a promising adjunct in antimicrobial periodontal treatment.     

Crosslinking kinetics of SBR composites containing vulcanized ground scraps as filler

The aim of this study was to characterize the cure reaction of styrene–butadiene rubber (SBR) composites containing industrial rubber scraps. Different proportions of SBR ground scraps (SBR-r), varying from 10 to 80 parts per hundred of rubber, were incorporated into a base formulation of identical composition. Crosslink formation and the kinetics of the cure reaction were evaluated through oscillatory disk rheometry, differential scanning calorimetry, and crosslink density. Cure characteristics, such as scorch time and cure time, decreased with increasing SBR-r content. Minimum torque indicated only a small variation in the viscosity with the incorporation of SBR-r. The maximum torque decreased with the addition of scrap rubber, as a consequence of the reduction in virgin rubber content where crosslinks had been formed. Crosslink density values corroborated these findings, presenting a slight decrease with the increase in the SBR-r content. The kinetic study indicated lower enthalpy values for SBR-r composites compared to those of the control sample. The kinetic parameters, such as activation energy and reaction order, indicated a change in the mechanism of reaction, related to the increased complexity of the systems.     

Imbalance diets in preschool children: study in a day-care center in the Province of Buenos Aires,Argentina

The purpose of this study was to investigate the impact of low fat diets in children aged 2 to 5. Eighty two children (40 females and 42 males) attending a school cafeteria (Province of Buenos Aires, Argentina), in a cross sectional study, were evaluated. Body weight (W), height (H) and body composition (BC) by bioimpedance were recorded. The anthropometric raw data were processed as Z-score of the weight-for-age (WEZ) and of the height-for-age (HAZ). Serum insulin-like growth factor 1 (IGF-1) and Zinc/haemoglobin ratio (Zn/Hb) were also measured. Results showed that 73.2% of the children were adequate (A) according WEZ, 13.4% were lean (L) and 13.4% overweight (O). 8.5% presented simultaneously impairment in WEZ and HAZ. Body fat percentage and energy metabolism were higher in O than in L and A (p < 0.05). Serum IGF-1's children--aged 4 to 5 years--with HAZ deficit were low than adequate HAZ ones. No statistical differences in Zn/Hb ratio between A, L and O were found. This cross sectional study suggests metabolic disorders in young children attending school cafeterias. These conclusions will allow to design balanced diets in order to optimize the resources, promote optimal growth and development and prevent adult diseases through dietary practices in childhood.     

Effect of the type of nylon chain‐end on the compatibilization of PP/PP‐GMA/nylon 6 blends

Polyamide and polypropylene (PP) are two important classes of commercial polymers; however, their direct mixing leads to incompatible blends with poor properties. Polypropylene functionalized with glycidyl methacrylate (PP‐GMA) was used as a compatibilizer in blends of PP and nylon 6, because of the possible reaction of ? NH₂ and ? COOH groups with the epoxide group of GMA. Two types of nylon 6 with different ratios between ? NH₂ and ? COOH groups were used. The one with higher concentration of ? COOH groups was less compatible with PP in a binary blend. When PP‐GMA was used as a compatibilizer, a better dispersion of nylon in the PP matrix was obtained together with better mechanical properties for both nylons used in this work. © 2001 Society of Chemical Industry     

Circulating Insulin-Like Growth Factor I is Involved in the Effect of High Fat Diet on Peripheral Amyloid β Clearance

Obesity is a risk factor for Alzheimer’s disease (AD), but underlying mechanisms are not clear. We analyzed peripheral clearance of amyloid β (Aβ) in overweight mice because its systemic elimination may impact brain Aβ load, a major landmark of AD pathology. We also analyzed whether circulating insulin-like growth factor I (IGF-I) intervenes in the effects of overweight as this growth factor modulates brain Aβ clearance and is increased in the serum of overweight mice. Overweight mice showed increased Aβ accumulation by the liver, the major site of elimination of systemic Aβ, but unaltered brain Aβ levels. We also found that Aβ accumulation by hepatocytes is stimulated by IGF-I, and that mice with low serum IGF-I levels show reduced liver Aβ accumulation—ameliorated by IGF-I administration, and unchanged brain Aβ levels. In the brain, IGF-I favored the association of its receptor (IGF-IR) with the Aβ precursor protein (APP), and at the same time, stimulated non-amyloidogenic processing of APP in astrocytes, as indicated by an increased sAPPα/sAPPβ ratio after IGF-I treatment. Since serum IGF-I enters into the brain in an activity-dependent manner, we analyzed in overweight mice the effect of brain activation by environmental enrichment (EE) on brain IGF-IR phosphorylation and its association to APP, as a readout of IGF-I activity. After EE, significantly reduced brain IGF-IR phosphorylation and APP/IGF-IR association were found in overweight mice as compared to lean controls. Collectively, these results indicate that a high-fat diet influences peripheral clearance of Aβ without affecting brain Aβ load. Increased serum IGF-I likely contributes to enhanced peripheral Aβ clearance in overweight mice, without affecting brain Aβ load probably because its brain entrance is reduced.     

Effects of ozonized water and heat treatment on the papaya fruit epidermis

This study examined the effects of O₃ and hot water treatments on the epidermis of Golden papaya fruit. Heat treatments were applied in a hot water brushing (HWB) system. Papayas were brushed under a pressurized hot water rinse stage at 45, 55 and 65 °C for 60 s. In the HWB treatment, 4 ppm ozone was applied to the papayas for 1 or 2 min. The results show that ozone applications did not affect the fruit's cuticular surface, while heat treatments allowed natural fissures on the fruit epidermis to recover. Several crystalloid forms were identified on the epidermis of the papayas after the heat treatments. The predominant crystalloid forms on papayas are tubular and there is a positive response to temperature; the higher the temperature, the larger and more frequent the tubular crystalloids.