PNET “ONDM 2019” special issue

Photonic Network Communications -     

Effect of binder system on the thermophysical properties of 3D-printed zirconia ceramics

Fabrication of 3D-printed ceramic parts with high complexity and high spatial resolution often demands low wall thickness as well as high stiffness at the green state, whereas printing simpler geometries may tolerate thicker, more compliant walls with the advantage of a rapid binder-burn-out and sintering process. In this work, the influence of the binder system on the thermophysical properties of 3D-printed stabilized zirconia ceramics was investigated. Samples were fabricated with the lithography-based ceramic manufacturing (LCM) technology using two different photosensitive ceramic suspensions (LithaCon 3Y230 and LithaCon 3Y210), with the same ZrO₂ powder. A significant difference in stiffness in the green state (~3 MPa vs. ~32 MPa for LithaCon 3Y230 and LithaCon 3Y210, respectively) was measured, associated with a rather loose or a linked network formed in the binder due to photopolymerization. Both materials reached high relative densities, that is, >99%, exhibiting a homogeneous fine-grained microstructure. No significant differences on the coefficient of thermal expansion (11.18 ppm/K vs. 11.17 ppm/K) or Young's modulus (207 GPa vs. 205 GPa) were measured, thus demonstrating the potential of tailoring binder systems to achieve the required accuracy in 3D-printed parts, without detrimental effects on material's microstructure and thermophysical properties at the sintered state.     

Functionalized polyglycidol-CuCl-complexes as catalysts in the oxidative coupling reaction of terminal acetylenes

Summary Novel hyperbranched amino-terminated polyglycidoles have been synthesized and tested as macromolecular ligands in the oxidative coupling reaction of phenylacetylene. Amino-terminated polyglycidoles-CuCl complexes showed to be more effective catalysts than the reference monomeric tertiary amines-CuCl ones, but less effective than the most efficient N,N,N'N'-tetramethylethylenediamine-(TMDA) CuCl complex. The difference in performance of monomeric and hyperbranched ligands is probably due to two factors. The first one is better complexation abilities and the second is the local increase of reagent concentration. Received: 28 April 2001/Revised version: 29 August 2001/Accepted: 5 September 2001     

The Synergy of the Support Acid Function and the Metal Function in the Catalytic Hydrodeoxygenation of m-Cresol

The hydrodeoxygenation (HDO) of m-cresol is investigated as a model for the HDO of phenolic compounds from lignin pyrolysis. Pt catalysts supported on ??-Al₂O₃ and SiO₂ are effective for the conversion of m-cresol to toluene and methylcyclohexane at 533?K and 0.5?atm H₂. Experiments using Pt/??-Al₂O₃ show that the reaction proceeds by a combination of Pt-catalyzed hydrogenation and acid-catalyzed dehydration reactions. Dehydration of a partially hydrogenated oxygenate intermediate is most likely the dominant reaction pathway to toluene. The acidity of the ??-Al₂O₃ support was modified by base (K₂CO₃) and acid (NH₄F) treatments, and increasing the number and strength of acid sites was found to increase the rate of HDO. Pt/SiO₂ was more active for m-cresol HDO than Pt/Al₂O₃. The reaction rate on Pt/Al₂O₃ and Pt/SiO₂ decreased after 5?h on stream, but Pt/Al₂O₃ regained initial reactivity after reductive treatment in H₂.     

Influence of the growth conditions on the defect density of single-walled carbon nanotubes

The influence of the temperature and precursor pressure on the defect density of single-walled carbon nanotubes (SWCNTs) grown by catalytic chemical vapor deposition was studied for several catalyst–precursor couples. The SWCNT defect density was assessed by studying the Raman D band. In situ Raman monitoring was used to determine experimental conditions allowing the preparation of samples free of pyrolytic carbon and not altered by air exposure. The most striking feature is that the Arrhenius plots of the I_G/I_D ratio systematically display a convex shape, i.e. the apparent activation energy decreases with increasing temperature. From HRTEM observations and oxidation experiments, this evolution of the D band features is ascribed to the catalytic growth of long SWCNTs with few defects at high temperature and of short and defective SWCNTs and carbon structures at low temperature. The convex Arrhenius behavior is well accounted by two kinetic models: (i) a model considering a change of intermediate states as a function of the temperature (for instance due to a phase transition of the catalyst particle or a change of intermediate carbon species) and (ii) a model considering a high-temperature process of defect creation (for instance by reaction with reactive gas species).     

Lipid Transfer to HDL is Higher in Marathon Runners than in Sedentary Subjects,but is Acutely Inhibited During the Run

Although exercise increases HDL-cholesterol, exercise-induced changes in HDL metabolism have been little explored. Lipid transfer to HDL is essential for HDL’s role in reverse cholesterol transport. We investigated the effects of acute exhaustive exercise on lipid transfer to HDL. We compared plasma lipid, apolipoprotein and cytokine levels and in vitro transfer of four lipids from a radioactively labeled lipid donor nanoemulsion to HDL in sedentary individuals (n = 28) and in marathon runners (n = 14) at baseline, immediately after and 72 h after a marathon. While HDL-cholesterol concentrations and apo A1 levels were higher in marathon runners, LDL-cholesterol, apo B and triacylglycerol levels were similar in both groups. Transfers of non-esterified cholesterol [6.8 (5.7–7.2) vs. 5.2 (4.5–6), p = 0.001], phospholipids [21.7 (20.4–22.2) vs. 8.2 (7.7–8.9), p = 0.0001] and triacylglycerol [3.7 (3.1–4) vs. 1.3 (0.8–1.7), p = 0.0001] were higher in marathon runners, but esterified-cholesterol transfer was similar. Immediately after the marathon, LDL- and HDL-cholesterol concentrations and apo A1 levels were unchanged, but apo B and triacylglycerol levels increased. Lipid transfer of non-esterified cholesterol [6.8 (5.7–7.2) vs. 5.8 (4.9–6.6), p = 0.0001], phospholipids [21.7 (20.4–22.2) vs. 19.1 (18.6–19.3), p = 0.0001], esterified-cholesterol [3.2 (2.2–3.8) vs. 2.3 (2–2.9), p = 0.02] and triacylglycerol [3.7 (3.1–4) vs. 2.6 (2.1–2.8), p = 0.0001] to HDL were all reduced immediately after the marathon but returned to baseline 72 h later. Running a marathon increased IL-6 and TNF-α levels, but after 72 h these values returned to baseline. Lipid transfer, except esterified-cholesterol transfer, was higher in marathon runners than in sedentary individuals, but the marathon itself acutely inhibited lipid transfer. In light of these novel observations, further study is required to clarify how these metabolic changes can influence HDL composition and anti-atherogenic function.     

Influence of granulometry and organic treatment of a Brazilian montmorillonite on the properties of poly(styrene‐co‐n‐butyl acrylate)/layered silicate nanocomposites prepared by miniemulsion polymerization

The influence of granulometry and organic treatment of a Brazilian montmorillonite (MMT) clay on the synthesis and properties of poly(styrene‐co‐n‐butyl acrylate)/layered silicate nanocomposites was studied. Hybrid latexes of poly(styrene‐co‐butyl acrylate)/MMT were synthesized via miniemulsion polymerization using either sodium or organically modified MMT. Five clay granulometries ranging from clay particles smaller than 75 μm to colloidal size were selected. The size of the clay particles was evaluated by specific surface area measurements (BET). Cetyl trimethyl ammonium chloride was used as an organic modifier to enhance the clay compatibility with the monomer phase before polymerization and to improve the clay distribution and dispersion within the polymeric matrix after polymerization. The sodium and organically modified natural clays as well as the composites were characterized by X‐ray diffraction analysis. The latexes were characterized by dynamic light scattering. The mechanical, thermal, and rheological properties of the composites obtained were characterized by dynamical‐mechanical analysis, thermogravimetry, and small amplitude oscillatory shear tests, respectively. The results showed that smaller the size of the organically modified MMT, the higher the degree of exfoliation of nanoplatelets. Hybrid latexes in presence of Na‐MMT resulted in materials with intercalated structures. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Tensile performance and crack propagation of coated woven fabrics under multiaxial loads

The tensile performance of coated woven fabrics under multiaxial loads is examined in the present study. Two groups of experiments were conducted to investigate the influences of the configuration of the fabric specimen and the loading speed on the multiaxial tensile properties of the fabrics. The configuration of the specimen for the multiaxial tensile tests is identified as gear‐shape with large arm widths. A loading speed of lower than 20 mm/min is suggested to obtain the tensile properties of the coated woven fabrics under multiaxial loads. The tensile performances of coated woven fabrics under uni‐, bi‐, and multiaxial loads were compared. We found that the tensile performances under bi‐ and multiaxial loads are much better than those under uniaxial loads. Therefore, for the application of the coated woven fabrics in lightweight structures, biaxial or multiaxial loading conditions will be necessary. Experiments on the specimens with an initial crack in the center under multiaxial loads show that, by comparison with other loading directions, the tensile properties in warp direction of the coated woven fabrics play an important role in the failure performance and crack propagation under multiaxial loads. To eliminate the dependence on the mechanical properties in warp direction, the balance of the two principle directions of coated woven fabrics should be improved. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Methamphetamine Blocks Adenosine A2A Receptor Activation via Sigma 1 and Cannabinoid CB1 Receptors

Methamphetamine is, worldwide, one of the most consumed drugs of abuse. One important side effect is neurodegeneration leading to a decrease in life expectancy. The aim of this paper was to check whether the drug affects one of the receptors involved in neurodegeneration/neuroprotection events, namely the adenosine A_2A receptor (A_2AR). First, we noticed that methamphetamine does not affect A_2A functionality if the receptor is expressed in a heterologous system. However, A_2AR becomes sensitive to the drug upon complexes formation with the cannabinoid CB₁ receptor (CB₁R) and the sigma 1 receptor (σ₁R). Signaling via both adenosine A_2AR and cannabinoid CB₁R was affected by methamphetamine in cells co-expressing the two receptors. In striatal primary cultures, the A_2AR–CB₁R heteromer complex was detected and methamphetamine not only altered its expression but completely blocked the A_2AR- and the CB₁R-mediated activation of the mitogen activated protein kinase (MAPK) pathway. In conclusion, methamphetamine, with the participation of σ₁R, alters the expression and function of two interacting receptors, A_2AR, which is a therapeutic target for neuroprotection, and CB₁R, which is the most abundant G protein-coupled receptor (GPCR) in the brain.