Sex Attractant Pheromone from the Rice Stalk Stink Bug, Tibraca limbativentris Stal

The male-produced sex pheromone from the Brazilian rice stalk stink bug Tibraca limbativentris is reported. Olfactometer bioassays with sexually mature males and females showed that males attracted females, which suggests that males release a sex pheromone. Males were not attracted to either sex, nor were females attractive to conspecific females. Attraction of the females to males was highest at night. The headspace volatiles collected from male and female bugs were analyzed by gas chromatography (GC) and GC–mass spectrometry. Two male-specific compounds were identified as isomers of 1′S-zingiberenol, whereas a series of defensive compounds were identified in extracts from both sexes. Zingiberenol has three chiral centers, and the nonselective syntheses used produced two groups of isomers, zingiberenol I containing four isomers, namely (1RS,4RS,1′R)-4-(1′,5′-dimethylhex-4′-enyl)-1-methylcyclohex-2-en-1-ol, and zingiberenol II containing the other four isomers, namely (1RS,4RS,1′S)-4-(1′,5′-dimethylhex-4′-enyl)-1-methylcyclohex-2-en-1-ol. Both groups of stereoisomers were more attractive than hexane controls. The absolute configuration of the insect-produced pheromonal components remains to be elucidated, but the 1′S stereochemistry was established for at least one of the isomers.     

The Drying of Pyridine Hydrobromide

1 INTRODUCTIONThe drying of fine chemicals and pharmaceuticals is dominated by a number of special factorscompared to the drying of bulk chemicals.These include:very high value of product;lowthroughputs(typically,100 kg·h~(-1));materials that frequently possess toxic properties andare often sticky,pasty and difficult to handle when wet;the moisture to be evaporated ofteninvolves solvents;and multipurpose processing plants.     

Distribution and mobility of arsenic in the Río Dulce alluvial aquifers in Santiago del Estero Province, Argentina

Factors controlling arsenic (As) mobilization in the aquifers of the Río Dulce alluvial cone were investigated. Groundwater analyses show severe As contamination (average concentration of 743 mug/L) from geogenic sources, but spatial variability of As concentration is considerable. Sequential leaching of sediment samples from unsaturated zone using de-ionised water, bicarbonate, acetate, and oxalate extracted As to different extents. Sediment oxalate extraction showed that Al and Mn oxide and hydroxides are more abundant than Fe oxides and hydroxides, in spite of similar total Fe, Mn, and Al concentrations in the sediment. Speciation calculations performed for saturated zone samples indicated that Fe and Al oxides and hydroxides are stable in groundwater, suggesting that As adsorption processes may be to some extent controlled by the presence of Fe and Al mineral phases. Principal Component Analysis (PCA) showed that As is related to F, V, Mo, B, Si, most likely due to their common origin in volcanic ash. This suggests the volcanic ash as the probable source of groundwater As. Locally, elevated pH values linked to carbonate dissolution, cation exchange, and dissolution of silicates promote release of adsorbed As. Another factor contributing to the release of As locally may be the input of organic matter from excessive irrigation. The conceptual model of As release includes: i) As influx from dissolution of volcanic glass in volcanic ash, ii) adsorption of As on the surface of Fe and Al mineral phases in relatively low pH zones, and iii) high mobility of As in high pH zones. Future work should be focused on the determination of mineralogical forms of As in volcanic ash and on detailed investigation on factors controlling As mobility.     

The contextualization of divergent outlooks in a Greenfield master-planned community: a pathway towards reflexivity

Comprehensive design schemes and specifications have progressively shaped Master-Planned Communities (MPCs). The market largely predetermines these outcomes, with background input from communities. Therefore, this paper endeavours to define the fundamental structures that generate differences between market actors and residents within the North Lakes MPC. This study employs ‘habitus theory’, which is a sociological phenomenon describing the divergence of personal outlooks and expertise. The application of this theory is thus illustrative of the evolution of distinct observations within MPCs. Contemporary studies have under-researched these inherent gaps between communities, authorities, and critics, and these frictions could be exacerbated within restrictive developmental contexts. Epistemic and objectified content analyses collated over many years and sources will uncover the underlying differences between the relevant groups. These analyses will enable the progression of a framework for understanding power relation biases and how reflexivity can enhance current consultative methods.     

Naproxen removal from water by chlorination and biofilm processes

Naproxen is an anti-inflammatory pharmaceutical that has been detected in natural and engineered aquatic environments. The primary aim of this research was to study chemical transformations of naproxen following chlorine oxidation, which is common in water and wastewater treatment systems. Synthetic waters containing elevated concentrations of naproxen were oxidized by free chlorine at naproxen:chlorine molar ratios of 0.02-3:1 and pH values of 5-9. The formation of naproxen products was dependent on pH, chlorine dosage and contact time. This study demonstrates that naproxen readily reacts with free chlorine and forms disinfection products. The formation of specific reaction products can vary depending on the characteristics of the water or wastewater and treatment operating conditions. More research is needed to identify intermediate and chemical reaction end products and to understand the reaction kinetics of naproxen chlorination for a range of water and wastewater treatment conditions. A secondary aim of this research was to study effects of naproxen and its chlorination products on biofilm processes, which are common in water and wastewater treatment systems and natural aquatic environments. A bioreactor was fed a naproxen solution and then fed a solution at the same naproxen concentration following contact with free chlorine. Results indicate that naproxen was not degraded biologically for the conditions of this study. In contrast, the naproxen solution containing products of chlorination caused an adverse response by discharging biomass from the bioreactor. Results therefore demonstrate that naproxen products of chlorination can adversely affect a biofilm process, which potentially can impact the performance of biofilm processes in natural and engineered aquatic environments. More research is needed to study naproxen chlorination reactions at low concentrations and in complex matrices, and to understand the toxicological relevance of naproxen and its products of chlorination in natural and engineered aquatic environments.     

Eggshell, a new bio-filler for polypropylene composites

Chicken eggshell (ES) is an industrial byproduct containing 95% calcium carbonate, and its disposal constitutes a serious environmental hazard. Different proportions of chicken eggshell as bio-filler for polypropylene (PP) composite were compared with different particle sizes and proportions of commercial talc and calcium carbonate fillers by tensile test. The Young's modulus (E) was improved with the increment of ES content, and this bio-filler was better than all types of carbonate fillers with different particle sizes used in this study. Although ES composites showed lower E values than talc composites, talc filler could be replaced by up to 75% with ES while maintaining a similar stiffness and E compared to the talc composites. Scanning electron microscopy showed an improved interfacial bonding on the tensile fractured surface. The improvement in the mechanical properties was attributed to a better ES/matrix interface related to the geometric ratio of the ES particles similar to talc particles.     

Ultra-dense planar metallic nanowire arrays with extremely large anisotropic optical and magnetic properties

A nanofabrication method for the production of ultra-dense planar metallic nanowire arrays scalable to wafer-size is presented. The method is based on an efficient template deposition process to grow diverse metallic nanowire arrays with extreme regularity in only two steps. First, III–V semiconductor substrates are irradiated by a low-energy ion beam at an elevated temperature, forming a highly ordered nanogroove pattern by a “reverse epitaxy” process due to self-assembly of surface vacancies. Second, diverse metallic nanowire arrays (Au, Fe, Ni, Co, FeAl alloy) are fabricated on these III–V templates by deposition at a glancing incidence angle. This method allows for the fabrication of metallic nanowire arrays with periodicities down to 45 nm scaled up to wafer-size fabrication. As typical noble and magnetic metals, the Au and Fe nanowire arrays produced here exhibited large anisotropic optical and magnetic properties, respectively. The excitation of localized surface plasmon resonances (LSPRs) of the Au nanowire arrays resulted in a high electric field enhancement, which was used to detect phthalocyanine (CoPc) in surface-enhanced Raman scattering (SERS). Furthermore, the Fe nanowire arrays showed a very high in-plane magnetic anisotropy of approximately 412 mT, which may be the largest in-plane magnetic anisotropy field yet reported that is solely induced via shape anisotropy within the plane of a thin film.

Open image in new window

     

Design and predicted performance of the 3-stage ADR for the Soft-X-ray Spectrometer instrument on Astro-H

The Japanese Astro-H mission will include the Soft X-ray Spectrometer (SXS) instrument provided by NASA/GSFC. The SXS will perform imaging spectroscopy in the soft X-ray band using a 6 × 6 array of silicon microcalorimeters operated at 50 mK. The detectors will be cooled by a 3-stage adiabatic demagnetization refrigerator (ADR). The configuration allows the ADR to operate with both a 1.3 K superfluid helium bath and a 4.5 K cryocooler as its heat sink. Initially, when liquid helium is present, the two coldest stages of the ADR will operate in a single-shot mode to cool the detectors from 1.3 K. During this phase of the mission, the 3rd stage may be used to reduce the net heat load on the liquid helium and extend its lifetime. When the liquid is depleted, the 2nd and 3rd stages will operate in a continuous mode to maintain the helium tank at about 1.3 K, allowing continued operation of the 1st stage (in a single-shot mode) and hence the SXS instrument. This paper describes the design and operating modes of the ADR, as well as details of critical components.     

Preparation and characterization of free films of high amylose/pectin mixtures cross-linked with sodium trimetaphosphate

High amylose and pectin were mixed at 1:1 mass ratio and cross-linked with sodium trimetaphosphate (STMP) in alkaline medium. Films were prepared from aqueous dispersions of these cross-linked polymer blend at three different concentrations (3, 4 and 5%), by solvent casting method. Characterization of the films included thickness, surface morphology, water uptake, water vapor permeability (WVP), tensile strength measurements and enzymatic digestion. The cross-linking allowed to obtain films with improved mechanical properties and reduced WVP. The high resistance to enzymatic digestion exhibited by these films represents a promising approach to their application in the development of colon drug delivery systems.