Dual polarized triple band hybrid MIMO cylindrical dielectric resonator antenna for LTE2500/WLAN/WiMAX applications

In this communication, triple band hybrid multi‐input–multi‐output (MIMO) cylindrical dielectric resonator antenna (CDRA) with high isolation is examined. The proposed MIMO antenna includes two symmetric folded microstrip line feeding structures along with CDRA at two different ends of substrate. Two inverted L‐shaped strips on the ground plane are used to enhance the isolation (S₁₂ < ?15 dB) as well as to generates 2.7 GHz frequency band. Metallic strip on the ground plane act as an electromagnetic reflector and also enhance the isolation between two antennas (S₁₂ < ?20 dB). Archetype of proposed MIMO antenna design has been fabricated and tested to validate the simulated results. The proposed antenna operates at three different frequency bands 2.24–2.38 GHz, 2.5–3.26 GHz, and 4.88–7.0 GHz (S₁₁ < ?6 dB) with the fractional bandwidth 6.06%, 26.4%, and 35.7%, respectively. Folded microstrip lines generate path delay between the electric field lines and originate circular polarization characteristics in the frequency range 5.55–5.75 GHz with the fractional bandwidth of 3.55%. In order to satisfy the different performance requirement of MIMO antenna such as envelop correlation coefficient, mean effective gain, effective diversity gain, peak gain are also examined. The proposed antenna is found suitable for LTE2500, WLAN, and WiMAX applications. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2016.     

Pyramid coding based rate control for constant bit rate video streaming

In this paper, a novel pyramid coding based rate control scheme is proposed for video streaming applications constrained by a constant channel bandwidth. To achieve the target bit rate with the best quality, the initial quantization parameter (QP) is determined by the average spatio-temporal complexity of the sequence, its resolution and the target bit rate. Simple linear estimation models are then used to predict the number of bits that would be necessary to encode a frame for a given complexity and QP. The experimental results demonstrate that the proposed rate control scheme significantly outperforms the existing rate control scheme in the Joint Model (JM) reference software in terms of Peak Signal to Noise Ratio (PSNR) and consistent perceptual visual quality while achieving the target bit rate. Finally, the proposed scheme is validated through experimental evaluation over a miniature test-bed.

     

Developing a limb repositioning robotic interface for persons with severe physical disabilities

Limb repositioning is necessary for individuals with severe physical disabilities to sustain muscle strength and prevent pressure sores. As robotic technologies become ubiquitous, these tools offer promise to support the repositioning process. However, research has yet to focus on ways in which individuals with severe physical disabilities can control robots for these tasks. This paper presents a study that examines the needs and attitudes of potential users with physical disabilities to control a robotic aid for limb repositioning. Subjects expressed interest in using brain–computer interface (BCI) and speech recognition technologies for purposes of executing robotic tasks. The performance of four subjects controlling arm movements on an avatar through the keyboard, mouse, BCI, and Dragon NaturallySpeaking speech recognition was evaluated. Although BCI and speech technologies may limit physical fatigue, more challenges were faced using BCI and speech conditions compared to the keyboard and mouse. This research promotes accessibility into mainstream robotic technologies and represents the first step in the development of a robotic prototype using a BCI and speech recognition technologies for limb repositioning.     

The Rank-Width of Edge-Coloured Graphs

A C-coloured graph is a graph, that is possibly directed, where the edges are coloured with colours from the set C. Clique-width is a complexity measure for C-coloured graphs, for finite sets C. Rank-width is an equivalent complexity measure for undirected graphs and has good algorithmic and structural properties. It is in particular related to the vertex-minor relation. We discuss some possible extensions of the notion of rank-width to C-coloured graphs. There is not a unique natural notion of rank-width for C-coloured graphs. We define two notions of rank-width for them, both based on a coding of C-coloured graphs by ${\mathbb{F}}^{*}$ -graphs— $\mathbb {F}$ -coloured graphs where each edge has exactly one colour from $\mathbb{F}\setminus \{0\},\ \mathbb{F}$ a field—and named respectively $\mathbb{F}$ -rank-width and $\mathbb {F}$ -bi-rank-width. The two notions are equivalent to clique-width. We then present a notion of vertex-minor for $\mathbb{F}^{*}$ -graphs and prove that $\mathbb{F}^{*}$ -graphs of bounded $\mathbb{F}$ -rank-width are characterised by a list of $\mathbb{F}^{*}$ -graphs to exclude as vertex-minors (this list is finite if $\mathbb{F}$ is finite). An algorithm that decides in time O(n ³) whether an $\mathbb{F}^{*}$ -graph with n vertices has $\mathbb{F}$ -rank-width (resp. $\mathbb{F}$ -bi-rank-width) at most k, for fixed k and fixed finite field $\mathbb{F}$ , is also given. Graph operations to check MSOL-definable properties on $\mathbb{F}^{*}$ -graphs of bounded $\mathbb{F}$ -rank-width (resp. $\mathbb{F}$ -bi-rank-width) are presented. A specialisation of all these notions to graphs without edge colours is presented, which shows that our results generalise the ones in undirected graphs.     

Bi-directional LSTM based channel estimation in 5G massive MIMO OFDM systems over TDL-C model with Rayleigh fading distribution

In this work, a deep learning (DL)-based massive multiple-input multiple-output (mMIMO) orthogonal frequency division multiplexing (OFDM) system is investigated over the tapped delay line type C (TDL-C) model with a Rayleigh fading distribution at frequencies ranging from 0.5 to 100 GHz. The proposed bi-directional long short-term memory (Bi-LSTM) channel state information (CSI) estimator uses online learning during training and offline learning during the practical implementation phase. The design of the estimator takes into account situations in which prior knowledge of channel statistics is limited and targets excellent performance, even with limited pilot symbols (PS). Three separate loss functions (mean square logarithmic error [MSLE], Huber, and Kullback–Leibler Distance [KLD]) are assessed in three classification layers. The symbol error rate (SER) and outage probability performance of the proposed estimator are evaluated using a number of optimization techniques, such as stochastic gradient descent (SGD), momentum, and the adaptive gradient (AdaGrad) algorithm. The Bi-LSTM-based CSI estimator is trained considering a specific number of PS. It can be readily seen that by incorporating a cyclic prefix (CP), the system becomes more resilient to channel impairments, resulting in a lower SER. Simulations show that the SGD optimization approach and Huber loss function-trained Bi-LSTM-based CSI estimator have the lowest SER and very high estimation accuracy. By using deep neural networks (DNNs), the Bi-LSTM method for CSI estimation achieves a superior channel capacity (in bps/Hz) at 10 dB than long short-term memory (LSTM) and other conventional CSI estimators, such as minimum mean square error (MMSE) and least squares (LS). The simulation results validate the analytical results in the study.     

Energy optimization for CAN bus and media controls in electric vehicles using deep learning algorithms

The Journal of Supercomputing - This study offers a neural network-based deep learning method for energy optimization modeling in electric vehicles (EV). The pre-processed driving cycle is...     

Cryorolling and warm forming of AA6061 aluminum alloy sheets

Cryorolling is a severe plastic deformation (SPD) process used to obtain ultrafine-grained aluminum alloy sheets along with higher strength and hardness than in conventional cold rolling, but it results in poor formability. An alternative method to improve both strength and formability of cryorolled sheets by warm forming after cryorolling without any post-heat treatment is proposed in this work. The formability of cryorolled AA6061 Al alloy sheets in the warm working temperature range is characterized in terms of forming limit diagrams (FLDs) and limiting dome height (LDH). Strain distributions and thinning in biaxially stretched samples are studied. Hardness of the formed samples is correlated with ultimate tensile strength to estimate post-forming mechanical properties. The limit strains and LDH have been found to be higher than in the case of the conventional processing route (cold rolled, annealed and formed at room temperature), making this hybrid route capable of producing sheet metal parts of aluminum alloys with high strength and formability. In order to combine the advantages of enhanced formability and better post-forming strength than the conventional cold rolled and annealed sheets, warm forming at 250°C has been found to be suitable for this alloy in the temperature range that has been studied.     

Aluminum phosphate sealing to improve insulation resistance of plasma-sprayed alumina coating

The insulation resistance of conventional atmospheric plasma-sprayed alumina coatings with 10–15% porosity is ～10¹¹ Ω. The presence of pores, lamellae boundaries, and other non-fillings dampens the insulation resistance of the coating. In the present study, aluminum phosphate was used to seal the surface of plasma-sprayed alumina coating and evaluate the effect of sealing on the insulation resistance and its thermal cycling response. Sealing was carried out with three concentrations of sealant (P/Al molar ratio of 3, 10, and 15). Characterization by X-ray diffraction and scanning electron microscopy revealed the primary sealing phase as aluminum metaphosphate and effective sealing of the pores by the aluminum phosphate phases. Insulation resistance is improved by two orders of magnitude after sealing the coated samples. Sealing with P/Al molar ratio 3 exhibited maximum insulation resistance of ～10¹³ Ω at room temperature. Thermal cycling studies between 650°C and 200°C on the sealed samples showed deterioration in thermal cycling life after sealing.     

Investigation of machining characteristics in rotary ultrasonic machining of alumina ceramic

Alumina ceramic is well documented as a much-demanded advanced ceramic in the present competitive structure of manufacturing and industrial applications owing to its excellent and superior properties. The current article aimed to experimentally investigate the influence of several process variables, namely: spindle speed, feed rate, coolant pressure, and ultrasonic power, on considered machining characteristics of interest, i.e., chipping size and material removal rate in the rotary ultrasonic machining of alumina ceramic. Response surface methodology has been employed in the form of a central composite rotatable design to design the experiments. Variance analysis testing has also been performed with a view to observing the consequence of the considered parameters. The microstructure of machined rod samples was evaluated and analyzed using a scanning electron microscope. This analysis has revealed and confirmed the presence of plastic deformation that caused removal of material along with brittle fractures in rotary ultrasonic machining of alumina ceramic. The validity and competence of the developed mathematical model have been verified with test results. The multi-response optimization of machining responses (material removal rate and chipping size) has also been attempted by employing a desirability approach, and at an optimized parametric setting the obtained experimental values for material removal rate and chipping size were 0.4166?mm³/s and 0.5134?mm, respectively, with a combined desirability index value of 0.849.