Scalable Data Processing for Community Sensing Applications

Participatory Sensing is a new computing paradigm that aims to turn personal mobile devices into advanced mobile sensing networks. For popular applications, we can expect a huge number of users to both contribute with sensor data and request information from the system. In such scenario, scalability of data processing becomes a major issue. In this paper, we present a system for supporting participatory sensing applications that leverages cluster or cloud infrastructures to provide a scalable data processing infrastructure. We propose and evaluate three strategies for data processing in this architecture.     

Overview of the scientific production in the Pharmacy area in Brazil: profile and productivity of researchers granted with fellowships by the National Council for Scientific and Technological Development

In Brazil, the National Council for Scientific and Technological Development (CNPq) distributes productivity fellowships in research (RS) as a recognition to individuals with outstanding productivity levels in their areas. The aim of this study is to evaluate the scientific production of the Brazilian Pharmacy area, one division of the Health Sciences Great Area of CNPq, considering the profile and productivity levels of RS fellows. The results showed that most of the 156 active RS fellows in 2015 were female, with doctorate completed in the Southeast region (mainly in University of São Paulo) and with research activities developed in the South and Southeast regions. Most of their work was published in journals classified as B1 and B2 Qualis in Pharmacy by the Coordination for the Improvement of Higher Education Personnel (CAPES), with high prevalence of publications in local journals and/or specialized on medicinal plants. Besides, they featured much dependence on advising and productivity indexes related to the category and level of RS fellowship. The evolution of such data must be continually evaluated to determine the influence of CNPq productivity fellowships on performance and stratification of researchers in the Pharmacy area in Brazil.     

Evaluation of the peptide profile with a view to authenticating buffalo mozzarella cheese

Electrophoretic and chromatographic techniques were used to determine water‐soluble peptide profiles aiming to identify the adulteration of buffalo milk mozzarella cheese by the addition of cow's milk. Thus, cheeses were produced with contents of cow's milk varying from 0% to 100%, and the peptides extracted after production and after 20 days of refrigeration. Polyacrylamide gel electrophoresis under denaturing conditions in the presence of sodium dodecyl sulphate (SDS‐PAGE) identified a potential peptide marker of exclusively bovine origin with a size of about 21 kDa for the addition of cow's milk above 30%. Reverse‐phase high‐performance liquid chromatography (RP‐HPLC) indicated the existence of two potential peptides present in higher concentrations in buffalo milk and one exclusive for cow's milk, the latter making it possible to estimate the addition of cow's milk to buffalo milk. Six commercial brands of buffalo mozzarella cheese were evaluated, and indications of adulteration found in four of them.     

Immobilization of aloin encapsulated into liposomes in Layer-by-layer films for transdermal drug delivery

Layer-by-layer (LbL) films have been exploited in drug delivery systems that may be used in the form of patches, but the encapsulation of poor water soluble drugs and their release with a controlled rate are still major challenges to be faced. In this paper, we demonstrate the controlled release of aloin (barbaloin), an important component of the widely used Aloe vera, encapsulated into liposomes and immobilized in LbL films with a polyelectrolyte. With a systematic study using fluorescence spectroscopy of aloin release from solutions and from LbL films with different phospholipid liposomes, we inferred that optimized release was achieved with aloin incorporated into palmitoyl oleyl phosphatidyl glycerol (POPG) or dipalmitoyl phosphatidyl glycerol (DPPG) liposomes immobilized in LbL films. Significantly, with this optimized system aloin was almost completely released within 30 h, with a small release rate at the end, which followed a sharp release in the first 5 h. Upon comparing the rates of the distinct systems, we conclude that the main factors controlling the release are the electrostatic interactions involving the negatively charged phospholipids. Because these interactions can be tuned in LbL films, the approach used here opens the way for new drug delivery systems to be developed with fine control of the drug release.     

Parking at the UC campus: Problems and solutions

This study underscores the importance of adopting integrated parking management policies that ensure not only more rational use of the available parking spaces, evenly balancing supply and demand and bringing in revenues to cover the parking facilities costs, but also the improved attractiveness of alternative transportation modes. Parking supply and demand flows within the UC campus are estimated. The results indicate that the parking facility is underpriced and that there is overcrowding. To reflect critically on these issues and identify research areas to address their socioeconomic implications, a survey regarding the characterization of campus commuters and their travel options is presented. Logistic regression modelling is applied to determine the relative importance of UC campus commuters’ attributes in their level of willingness to pay to have reserved parking on the campus. Finally, some policy proposals are discussed.     

Admixtures effect on fresh state properties of aerial lime based mortars

Especially in rehabilitation works, the use of lime based mortars have been increasing due to the need of compatibility between the old and the new materials. The mortars fresh state properties are extremely important since determines the material workability and also have a great influence on its hardened state characteristics.In this work, the fresh state properties of aerial lime pastes and aerial lime based mortars were investigated. The torque variation with time and the mortar rheological parameters (relative yield stress and plastic viscosity) were obtained using a rheometer suitable for mortars. The correlation of rheological data with slump and relative density measurements was studied.The mortars workability is affected by several parameters, namely, the binder/aggregate and water/binder ratios, the kneading water content, the admixtures type and amount. The admixtures influence (type and amount) on the fresh state properties of aerial lime based mortars are discussed. The used admixtures were the most common ones for several mortars, such as a water-retaining agent, a plasticizer and an air-entraining agent.     

Electric distribution network reconfiguration based on a fuzzy multi-criteria decision making algorithm

Topological reconfiguration is an important tool for the planning and operation of electric power distribution systems. The amount of time that an algorithm spends to obtain an alternative topological status for the system is not a primary concern, as the main goals of distribution operation planning are the reduction of power losses, the enhancement of the voltage profile, and the increase of reliability levels. The utility can use multiple criteria regarding the observation of regulation policies and public awareness to drive the topological reconfiguration. Several researchers are looking for new optimization methods, as the complexity of this combinatorial issue is high in large systems and the classic optimization methods are failing to address the problem reasonably. Therefore, a new fuzzy multi-criteria decision making algorithm for the proper processing of the information sources available at the utilities in the context of distribution network reconfiguration is proposed. The algorithm is evaluated through the use of a proof-of-concept implementation in a set of case studies based on actual distribution systems.     

Burial grounds’ impact on groundwater and public health: an overview

The most common practice for disposal of dead bodies is inhumation in soil, which favours interactions with the surrounding environment and returns nutrients to the life cycle. However, when the burial ground is located where hydrogeological, geological and climatic conditions are not favourable to the process, contamination of soils and groundwater may occur, and decomposition may be inhibited, leading to social, economic and political problems. The most critical parameters when assessing the pollution potential of a burial ground are inhumation depth, geological formation, depth of the water table, density of inhumations, soil type and climate. Considering that, this paper presents an overview of the potential threat that cemeteries can pose, analysing and discussing the influence of the main variables causing environmental impacts and public health risks.     

Effect of self-etching dual-curing universal adhesive system application on bond strength of dentin resinous liners dentin

Purpose: The aim of this study was to evaluate the influence of previous application of an adhesive system on bond strength of resinous liner materials to dentin. Methods: Ninety bovine incisors crowns had a 6 × 6 mm area of dentin exposed, with minimum of 2 mm thickness. They were embedded in acrylic resin, and the dentin was polished with P600 SiC sandpaper for 30 s to standardize the smear layer. The specimens were divided into 6 groups (n = 15) according to the application or not of a self-etching system (Futurabond U – Voco) and the type of resinous liner used: A+Ionoseal (adhesive and Ionoseal – Voco); Ionoseal (Ionoseal only); A+Vitrebond (adhesive and Vitrebond – 3M/ESPE); Vitrebond (Vitrebond only); A+Ionosit (adhesive and Ionosit – DMG) and Ionosit (Ionosit only). Adhesives were used following manufacturer’s instructions, and the liner materials were applied inside a 2-mm-depth matrix and light-cured for 20 s. The bond strength was measured by microtensile test, using a universal testing machine with a cross-speed of 1 mm/min. Data were analyzed using one-way ANOVA and Tukey’s test (p < 0.05). Results: The adhesive system application increased bond strength of all liners tested. Ionoseal presented the highest bond strength when the adhesive system was used and exhibited similar performance to Vitrebond without adhesive. Ionosit without adhesive showed the smallest bond strength compared with the other liners tested. Conclusion: The application of an adhesive system prior to the use of the resinous liners improved the bond strength to dentin and should be preconized.