Obtaining condensed milk from a mixture of hydrosoluble extract of soybean powder and cow's milk]

Three formulations of mix concentrated milk with hydrosolubles extract of soybean powder and cow's milk were prepared. The products were condensed up to 31% and 33.65% of solids in a vacuum evaporator at temperature of 45 degrees and 58 degrees C with a vacuum pressure of 540 mmHg. The products obtained were compared with standard concentrated milk through sensory evaluation showing satisfactory characteristics.     

Boundary scan test,test methodology,and fault modeling

The test technique called boundary scan test (BST) offers new opportunities in testing but confronts users with new problems too. The implementation of BST in a chip has become an IEEE standard and users on board level are the next group to begin thinking about using the new possibilities. This article addresses some of the questions about changes in board-level testing and fault diagnosis. The fault model itself is also affected by using BST. Trivial items are extended with more sophisticated details in order to complete the fault model. Finally, BST appears to be a test technique that offers a high degree of detectability on board level, but for diagnosis, some additional effort has to be made.     

An investigation of the synergistic effect between magnetite nanoparticles and polypyrrole in nanostructured layer-by-layer films

In this paper, we report the controlled fabrication of layer-by-layer (LbL) films deposited on gold substrates with three different supramolecular architectures using polypyrrole (Ppy) and magnetite nanoparticles (Fe₃O₄-np), besides conventional poly(allylamine hydrochloride) (PAH) e poly(vinyl sulfonic acid) (PVS) polyelectrolytes, demonstrating the synergistic effect between Ppy and Fe₃O₄-np such as a result of their interaction. Modified gold electrodes were analyzed by contact angle (wettability), surface plasmon resonance (SPR), raman spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The (Fe₃O₄-np/Ppy)₃ architecture was also evaluated by scanning electron microscopy. The modified gold electrodes present more homogeneous covering, higher electron transfer and a decrease of resistance with the incorporation of the nanostructured materials such as Ppy and Fe₃O₄-np forming (Fe₃O₄-np/Ppy)₃ LbL film. The results carried out in this study suggest that the (Fe₃O₄-np/Ppy)₃ LbL film can be applied as a possible electrochemical or optical non-enzymatic sensor for analytical detection.     

Antistatic packaging based on PTT/PTT-g-MA/ABS/MWCNT nanocomposites: Effect of the chemical functionalization of MWCNTs

Polymer/carbon nanotube nanocomposites have attracted high interest for a wide spectrum of applications, including antistatic packaging used to protect electronic devices against electrostatic discharge. Polytrimethylene terephthalate (PTT)/maleic-anhydride-grafted PTT (PTT-g-MA)/acrylonitrile butadiene styrene (ABS) blend-based multiwall carbon nanotubes (MWCNTs) nanocomposites were prepared through extrusion. It was conducted chemical functionalization on the MWCNTs by oxidation using nitric acid to introduce functional groups. The effect of the amount (0.5 or 1.0 wt%) and functionalization of MWCNTs on the nanocomposites was investigated. Despite the poor barrier properties of PTT/PTT-g-MA/ABS/MWCNT nanocomposites due to the presence of voids confirmed by scanning electron microscopy (SEM), the nanocomposites with functionalized MWCNT (MWCNTf) showed excellent barrier properties, indicating that the functionalization process improved the interaction between the MWCNTs and the matrix. The addition of MWCNTs into PTT/PTT-g-MA/ABS blend decreased the electrical resistivity by eight orders of magnitude. The use of MWCNTf may still disrupt the electrical network pathway and slightly decreasing the electrical resistivity, but the nanocomposites present the desired properties required for antistatic packaging.     

The corrosion of mild steel in simulated SO2 containing atmospheres

Electrochemical tests were carried out on steel/steel multi-laminar cells under thin layers of sulphate solution simulating atmospheres with contents of 20, 50 and 75 μg m⁻³ of SO₂ and a relative humidity of 85%. Measurements of the current flowing between the two electrodes of the cell vs drying time and impedance measurements for different times were taken. Potentiodynamic cathodic polarization plots were also obtained for one concentration of contaminant at various drying times using three electrode multi-laminar cells. The results showed that the multi-laminar cells allowed the drying process of the thin electrolyte films to be followed. The use of electrochemical techniques gave information on the kinetics and mechanism of the corrosion process occurring during the drying period. Initially the process is controlled by oxygen diffusion through the liquid film, but for longer periods the control changes to the anodic reaction.     

Characterizing peers communities and dynamics in a P2P live streaming system

Despite the large number of works devoted to understand P2P live streaming applications, most of them put forth so far rely on characterizing the static view of these systems. In this work, we characterize the SopCast, one of the most important P2P live streaming applications. We focus on its dynamics behavior as well as on the community formation phenomena. Our results show that SopCast presents a low overlay topology diameter and low end-to-end shortest path. In fact, diameter is smaller than 6 hops in almost 90 % of the observation time. More than 96 % of peers’ end-to-end connections present only 3 hops. These values combined may lead to low latencies and a fast streaming diffusion. Second, we show that communities in SopCast are well defined by the streaming data exchange process. Moreover, the SopCast protocol does not group peers according to their Autonomous System. In fact, the probability that a community contains 50 % of its members belonging to the same AS (when we observe the largest AS of our experiments) is lower then 10 %. Peers exchange more data with partners belonging to the same community instead of peers inside the same AS. For the largest AS we have, less than 18 % of peer traffic has been exchanged with another AS partners. Finally, our analysis provides important information to support the future design of more efficient P2P live streaming systems and new protocols that exploit communities’ relationships.     

Real filter based on Mellin radial harmonics for scale-invariant pattern recognition

Several theoretical and experimental studies are developed in order to simplify the construction of filters based on Mellin radial harmonics (MRH) for scale-invariant pattern recognition. A real filter based on MRH is designed. The impulse response of the filter is a hermitic function, obtained by a suitable modification of a MRH component. This real filter has the same scale invariance as the conventional complex MRH filters, with the main advantage of its simplicity. Both computer simulations and optical experiments are presented.     

Color encoding for polychromatic single-channel optical pattern recognition

The common multichannel system for recognizing colored images is replaced by a color-encoded single-channel system. Amethod inspired by the Munsell color system is used for encoding the different colors as phase and amplitude functions. It is shown that for many practical cases the phase information part of the color code is sufficient for obtaining good results. An implementation based on a liquid-crystal television panel that works in a phase-modulation mode is suggested. Computer simulations that demonstrate the capabilities of the suggested method are given as well as a comparison with previously published multichannel performance.     

Design Optimization of Composite Prosthetic Tubes Using GA-ANN Algorithm Considering Tsai-Wu Failure Criteria

The investigation of possible failures in composite materials is a matter of very great importance, and the Tsai-Wu criterion is an effective criterion for analyzing those flaws in anisotropic materials and defining whether the material at a given load will or will not suffer structural failure. In this study, an optimization procedure is proposed to minimize the maximum value of Tsai-Wu of laminated composite tubes subject to axial loading. Artificial neural networks and genetic algorithms are chosen as optimization tools. The results of this study show that the developed algorithm converges faster. Then, the maximum Tsai-Wu value is used as the objective function and the fiber orientations are the constraints in the optimization process. The results yielded by them are compared and discussed. Optimal results are compared with respect to the usual initial design. The design approach is recommended for structures where composites are the key load-carrying members such as orthopedic prosthesis.