Preparatory processes in the task-switching paradigm: Evidence from the use of probability cues.

The purpose of the investigations was to dissociate processes of task preparation from task execution in the task-switching paradigm. The basic assumption was that task repetitions have 2 advantages over task shifts: an activation advantage as a result of the execution of the same task type in the pretrial, and an expectation advantage, because participants, in general, implicitly expect a repetition. In Experiments 1-3, the authors explicitly manipulated expectancies by presenting cues that announced a shift and/or a repetition with probabilities of 1.00, .75, .50, or .25. Increasing latencies with decreasing probability for shifts and repetitions show that the expectation advantage can be equalized by preparation. However, the activation advantage represented by constant shift costs between tasks of the same probability is not penetrable by preparation. In Experiments 4 and 5, the authors found evidence that preparation involves activation of the expected task and inhibition of distracting tasks. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Synthesis and characterization of uniformly coated particles (cobalt compounds on copper compounds)

Spherical particles (～3 μm) of copper(II) oxalate were produced in the form of precipitated solids by gently mixing aqueous solutions of oxalic acid and copper nitrate with predetermined concentrations at room temperature. These particles were isolated from the mother liquor and then coated with cobalt basic carbonate. The coating trials involved heating of the aqueous dispersions, containing known amounts of the dispersed copper oxalate particles (cores), urea, and cobalt nitrate, at 70–85 °C for various periods of time with constant stirring. The heating process decomposed urea, increased pH, liberated carbonate ions, which resulted in the precipitation of the dissolved cobalt ions in the form of shells of cobalt basic carbonate around each core particle. The coating process was sensitive to the applied experimental parameters, since uniformly coated particles were obtained under a narrow range of coating mixture composition. In the absence of the cores, the same reactants solutions produced coating precursor particles (cobalt basic carbonate), when subjected to similar heating conditions. Physical and chemical analyses indicated that the coating material of the coated particles and the coating precursor particles had the same chemical compositions. The as-prepared core, coating precursor, and coated particles were converted into oxide forms by heating their dry powders at elevated temperatures under controlled heating conditions. The heat treatment produced obvious changes in the surface morphology of these particles due to loss of material. Moreover, the heat-treated particles preserved shape integrity to a maximum extent, showing their thermal stability. Selected batches of the as-prepared and heat-treated products were characterized by various physical methods.     

Integrated Urban Lei River (North Pakistan) Water Resources Management

The urban Lei river consists of a catchment area of about 211 km 2 . About 55% lies in Islamabad (population about 3 million) and the rest in Rawalpindi (population about 3 million). The city of Islamabad is growing without considering its hydrogeological set-up, which is creating further flood problems in Rawalpindi. Even after the drought of 1994, groundwater is being privately exploited without any central legal control. Measures for increasing the amount of available groundwater would improve drinking water both qualitatively and quantitatively, reduce loss through uncontrolled runoff, reduce aquifer depletion and lead also to improved monitoring. The chessboard regional city planning of Islamabad, as laid down in the Master Plan (1960), has to be replanned inter-disciplinary according to topographical, geological, meteorological, hydrological and hydrogeological investigations. Sustainable ecological solutions ought not be sacrificed to political short-sighted expedience.     

Shape optimization of wire-wrapped fuel assembly using Kriging metamodeling technique

In this work, shape optimization of a wire-wrapped fuel assembly in a liquid metal reactor has been carried out by combining a three-dimensional Reynolds-averaged Navier–Stokes analysis with the Kriging method, a well-known metamodeling technique for optimization. Sequential quadratic programming (SQP) is used to search the optimal point from the constructed metamodel. Two geometric design variables are selected for the optimization and design space is sampled using Latin Hypercube Sampling (LHS). The optimization problem has been defined as a maximization of the objective function, which is as a linear combination of heat transfer and friction loss related terms with a weighing factor. The objective function value is more sensitive to the ratio of the wire spacer diameter to the fuel rod diameter than to the ratio of the wire wrap pitch to the fuel rod diameter. The optimal values of the design variables are obtained by varying the weighting factor.     

Maleated high oleic sunflower oil‐treated cellulose fiber‐based styrene butadiene rubber composites

Surface treatment of cellulose fibers was performed with maleated high oleic sunflower oil (MSOHO). The MSOHO‐treated cellulose fibers and unmodified cellulose fibers were dispersed in styrene butadiene rubber (SBR) using a two roll mill. Vapor grown carbon nanofibers (VGCNF) were also incorporated at only one parts per hundred rubber (phr) in unmodified cellulose fibers/SBR composites. The curing characteristics, mechanical properties, and water absorption of the resulting composites were determined. MSOHO‐treated fibers completed curing at much slower rate and also decreased the cure density of composites, compared to unmodified fibers. In contrast, the combination of VGCNF and unmodified cellulose fibers accelerated the SBR curing process, but reduced the cure density. MSOHO treatment improved the dispersion of the fibers in the SBR, which resulted in improved mechanical properties of composites. The composite incorporating 1 phr VGCNF and 15 phr unmodified cellulose fibers showed the greatest increase in tensile strength as compared with neat SBR. POLYM. COMPOS. 37:1113–1121, 2016. © 2014 Society of Plastics Engineers     

A medium access protocol exploiting multiuser-detection in CDMA ad-hoc networks

A new medium access protocol which exploits the physical layer capability of multiuser detection is proposed to help in improving the throughput/delay performance of ad-hoc networks. When more than one node has packets buffered for a common node in the neighborhood, all such nodes can simultaneously transmit their packets to the common receiver after reserving their surrounding channel. This is achieved in our protocol by extending the (sender-initiated) CSMA/CA collision avoidance framework by the receiver-initiated medium access technique and incorporating the transmission power control. We analyze the improvement in the throughput that can be achieved over the basic sender-initiated collision avoidance protocol in the network. Since the throughput improvement via multi-packet reception is influenced by the network layer activity as well, the performance of our protocol rolls back to that of the basic sender-initiated protocol in case of no coordination from the network layer. For the evaluation of performance of our protocol we simulate ad-hoc networks for different network topologies and traffic configurations. We observe the scheme to be capable in significantly improving the throughput/delay performance of the network.     

Analysis of Asynchronous Band-Limited DS-CDMA with MMSE Multiuser Detector over Generalized-<Emphasis Type="Italic">k</Emphasis> Fading Channels

In this paper, we investigate bit-error-rate (BER) performance of a minimum mean-squared error (MMSE) multiuser receiver for asynchronous band-limited direct- sequence code-division multiple-access (DS-CDMA) systems. We focus on the BER performance in the presence of multitone jamming (MTJ) over frequency-selective multipath fading channels. We consider the generalized-K fading model in our analysis, as it can model a large spectrum of fading-channel characteristics. We also analyze the effects of band- limited pulse shape on the BER performance of the system. Multipath diversity based on the maximal-ratio combining (MRC) scheme is employed to combat fading effects. Our analytical expressions are valid for arbitrary diversity levels and fading parameters. Spectrum raised cosine (SRC) and Beaulieu–Tan–Damen (BTD) pulse shapes are employed for numerical analysis. Numerical results show that in the presence of MTJ and under various channel conditions, the MMSE based receiver gives better BER performance than the one without it. Moreover, the system with BTD pulses outperforms the one with SRC pulses.     

Mechanical and Microstructural Evaluation of Squeeze Cast Al-4%Cu Alloy Using a Full-Factorial Experimental Design

A full factorial design was employed to investigate the effect of squeeze pressure in conjunction with thermal parameters, i.e., melt and die temperatures, on the mechanical properties of a squeeze cast Al-4%Cu alloy. Considerable variations in mechanical properties existed between different test runs, and these were discussed based on cooling rates previously quantified for a squeeze-cast Al-4%Cu alloy. The completeness of a full factorial design not only identified a combination of process parameters for optimum results but also facilitated an evaluation of the minimum pressure required to eliminate porosity and influence the die temperature on the microstructure of the squeeze-cast alloy. In addition to the optimum run, particular importance was given to those runs that had more desirable levels of control factors with respect to energy consumption or tooling life. A microstructural analysis of these runs indicated the possibility of precipitation hardening that can open up further investigations toward the opportunities associated with in situ heat treatment of age-hardening, squeeze cast aluminum alloys.     

Single-component and three-component fuel cells

Single-component and three-component fuel cell devices have been studied using mixed ionic and electronic conductor. The three-component fuel cell means a conventional fuel cell which is the configuration consists of anode, electrolyte and cathode; while the single-component fuel cell uses only one component that can function as the electrodes and electrolyte simultaneously. The single-component fuel cell showed the same or even better performance compared to conventional three-component fuel cell. A maximum power density of 700 mW cm⁻² has been achieved by the single-component fuel cell at 550 °C.     

Sign Language to Sentence Formation: A Real Time Solution for Deaf People

Communication is a basic need of every human being to exchange thoughts and interact with the society. Acute peoples usually confab through different spoken languages, whereas deaf people cannot do so. Therefore, the Sign Language (SL) is the communication medium of such people for their conversation and interaction with the society. The SL is expressed in terms of specific gesture for every word and a gesture is consisted in a sequence of performed signs. The acute people normally observe these signs to understand the difference between single and multiple gestures for singular and plural words respectively. The signs for singular words such as I, eat, drink, home are unalike the plural words as school, cars, players. A special training is required to gain the sufficient knowledge and practice so that people can differentiate and understand every gesture/sign appropriately. Innumerable researches have been performed to articulate the computer-based solution to understand the single gesture with the help of a single hand enumeration. The complete understanding of such communications are possible only with the help of this differentiation of gestures in computer-based solution of SL to cope with the real world environment. Hence, there is still a demand for specific environment to automate such a communication solution to interact with such type of special people. This research focuses on facilitating the deaf community by capturing the gestures in video format and then mapping and differentiating as single or multiple gestures used in words. Finally, these are converted into the respective words/sentences within a reasonable time. This provide a real time solution for the deaf people to communicate and interact with the society.