Error evaluation on experimental stress–strain curve obtained from tube bulging test

To get precise material data for advanced numerical modelling of tube hydroforming process, the tube bulging test is recommended. Stresses and strains in the tube cannot be evaluated easily and several approaches have been proposed. A review is proposed and points out their advantages and drawbacks.     

Influence of Aging Parameters on the Tensile Properties and Quality Index of Al-9?Pct Si-1.8?Pct Cu-0.5?Pct Mg 354-Type Casting Alloys

The current study was carried out with a view to investigating the influence of age-hardening parameters, aging temperature and time, on the tensile properties and quality indices of a high-strength Al-9 pct Si casting alloy, namely, 354-Al-9 pct Si-1.8 pct Cu-0.5 pct Mg. Quality charts were used as an evaluation tool for selecting the optimum conditions to be applied, in practice, in order to develop high strength and optimum quality in 354 casting alloy. Aging at a low temperature of 428 K (155 °C) was observed to produce the greatest strength and optimum quality in the 354-type castings compared to aging at higher temperatures. The peak strength observed for 354 alloy may be attained after shorter aging times on the condition that the aging temperature is increased. The aging times required for reaching peak strength in 354 alloys are 72 hours, 40 hours, 8 hours, 1 hour, and 15 minutes at aging temperatures of 428 K, 443 K, 468 K, 493 K, and 518 K (155 °C, 170 °C, 195 °C, 220 °C, and 245 °C), respectively. Aging treatment at higher temperatures is accompanied by a reduction in the tensile properties and quality index values of the castings; however, it also introduces the possibility of a significant economical strategy for minimizing the time and the cost of this same treatment. Aging treatment at a lower temperature of 428 K (155 °C) produces fine and dense precipitates displaying smaller interparticle spacing, while at higher aging temperatures, such as 518 K (245 °C), the precipitates are coarser in size, less dense, and more widely dispersed. The quality charts developed in the course of the current research facilitate the interpretation and evaluation of the tensile properties of the 354 alloy. Such charts provide a logical evaluation tool, from the metallurgical point of view, for an accurate prediction of the influence of aging parameters studied on the properties of the alloys. Depending on the required level of tensile properties and based on the quality charts developed, it is possible to make a rigorous selection as to the most suitable aging parameters to be applied to the 354 alloy so as to obtain the best possible cost-effective compromise between alloy strength and quality.     

采用煤矸石为原料合成β-SiAlON晶须及其显微结构研究

以煤矸石和碳黑为主要原料,在1800 K下碳热还原氮化合成了纯度较高、含有大量晶须的β-SiAlON材料.FESEM照片表明β-SiAlON晶须多为细长柱状,直径120～220 nm,长度1.5～5 μm,晶须生长机制由VLS(vapor-liquid-solid)机制和VS(vapor-solid)机制组成.     

惯量和刚度对电动负载模拟器频宽影响的分析

给出了一种电动负载模拟器的系统结构，分析了系统惯量和轴系刚度与系统加载频宽之间的关系并进行了仿真实验研究。结果表明，对于电动负载模拟系统，在选择负载惯量和轴系刚度时，既要考虑使转矩伺服系统有较高的频响，又要考虑系统的稳定性和多余力矩的抑制效果。     

Cardiovascular responses and mammary substrate uptake in Jersey cows treated with pituitary-derived growth hormone during late lactation

Pituitary-derived bovine growth hormone (bGH) was administered to Jersey cows during late lactation for 7 d. Milk yield increased significantly during treatment and by a maximum of 49.6% on d 7. The magnitude of the increase was similar to that of mammary plasma flow (47.8 +/- 18.3%) over the same period. By 15-21 d after treatment, both variables had returned to pretreatment values. With respect to milk composition, bGH had negligible effect on lactose and fat concentrations but there were significant decreases in protein, sodium and chloride. Arterial plasma concentrations of bGH increased substantially during treatment, but the associated rise in insulin was not statistically significant. Haematocrit decreased significantly, the lowest value being recorded 3 d after bGH treatment ceased. Mammary respiratory quotient fell progressively after the start of bGH treatment and reached the lowest recorded value 3 d after treatment ceased (62.2 +/- 7.3% of pretreatment value). Glucose and acetate uptake by the mammary gland increased significantly during treatment, increase in glucose uptake being due both to a greater arterio-venous difference and to mammary plasma flow. There was strong evidence that the acute response in increased milk yield was associated with multiple effects in terms of mammary plasma flow and metabolism, as well as haematocrit changes indicative of increased plasma volume.     

Reconstruction and quantification of the carotid artery bifurcation from 3-D ultrasound images

Three-dimensional (3-D) ultrasound is a relatively new technique, which is well suited to imaging superficial blood vessels, and potentially provides a useful, noninvasive method for generating anatomically realistic 3-D models of the peripheral vasculature. Such models are essential for accurate simulation of blood flow using computational fluid dynamics (CFD), but may also be used to quantify atherosclerotic plaque more comprehensively than routine clinical methods. In this paper, we present a spline-based method for reconstructing the normal and diseased carotid artery bifurcation from images acquired using a freehand 3-D ultrasound system. The vessel wall (intima-media interface) and lumen surfaces are represented by a geometric model defined using smoothing splines. Using this coupled wall-lumen model, we demonstrate how plaque may be analyzed automatically to provide a comprehensive set of quantitative measures of size and shape, including established clinical measures, such as degree of (diameter) stenosis. The geometric accuracy of 3-D ultrasound reconstruction is assessed using pulsatile phantoms of the carotid bifurcation, and we conclude by demonstrating the in vivo application of the algorithms outlined to 3-D ultrasound scans from a series of patient carotid arteries.     

一种双极性高精度半导体激光器温度控制系统

温度是影响半导体激光器（LD）寿命和输出特性的重要因素之一。为保证LD输出稳定的激光模式和功率,采用以ADC和DAC集成的微处理器芯片C8051F350和具有双极性输出电流的TEC驱动芯片MAX1968为控制核心,以积分分离和变速积分增量式相结合的数字PID算法为运算程序的自动温度控制系统(ATC)控制TEC驱动电流的方向和大小,实现对LD的加热或制冷,使其工作在恒定温度。实验证明,应用该系统,LD在0℃～40℃环境温度范围内能很快稳定在设定温度,且其不确定度为±0.03℃。     

Images of a First‐Order Spin‐Reorientation Phase Transition in a Metallic Kagome Ferromagnet

First‐order phase transitions, where one phase replaces another by virtue of a simple crossing of free energies, are best known between solids, liquids, and vapors, but they also occur in a wide range of other contexts, including even elemental magnets. The key challenges are to establish whether a phase transition is indeed first order, and then to determine how the new phase emerges because this will determine thermodynamic and electronic properties. Here it is shown that both challenges are met for the spin reorientation transition in the topological metallic ferromagnet Fe₃Sn₂. The magnetometry and variable temperature magnetic force microscopy experiments reveal that, analogous to the liquid–gas transition in the temperature–pressure plane, this transition is centered on a first‐order line terminating in a critical end point in the field‐temperature plane. The nucleation and growth associated with the transition is directly imaged, indicating that the new phase emerges at the most convoluted magnetic domain walls for the high temperature phase and then moves to self‐organize at the domain centers of the high temperature phase. The dense domain patterns and phase coexistence imply a complex inhomogenous electronic structure, which can yield anomalous contributions to the electrical conductivity.     

Identifying FMRI model violations with lagrange multiplier tests

The standard modeling framework in functional magnetic resonance imaging (fMRI) is predicated on assumptions of linearity, time invariance and stationarity. These assumptions are rarely checked because doing so requires specialized software, although failure to do so can lead to bias and mistaken inference. Identifying model violations is an essential but largely neglected step in standard fMRI data analysis. Using Lagrange multiplier testing methods we have developed simple and efficient procedures for detecting model violations such as nonlinearity, nonstationarity and validity of the common double gamma specification for hemodynamic response. These procedures are computationally cheap and can easily be added to a conventional analysis. The test statistic is calculated at each voxel and displayed as a spatial anomaly map which shows regions where a model is violated. The methodology is illustrated with a large number of real data examples.