Physicochemical Properties,Lipid Oxidation,and Fatty Acid Composition of Sausage Prepared with Meat of Young Nellore Bulls Fed a Diet with Lauric Acid

This study evaluates the quality of sausage obtained from the meat of Nellore cattle fed diets containing different levels (0, 5, 10, and 15 g per kg total DM) of lauric acid (C12:0) from palm kernel cake. A linear reduction (p ≤ 0.05) in lipid oxidation, as reflected by linear decreases in the lightness (L*), yellowness (b*), and saturation (C*) color parameters, is observed on days 7, 14, and 21 of maturation of sausage, and these decreases are accompanied by linear increases in the redness (a*) color and the linoleic (C18:2n–6) and linolenic (C18:3n–3) fatty acid contents. The inclusion of lauric acid in the diet induces linear reductions in the shear force and cooking loss and does not significantly affect various indices, including the centesimal composition, water activity, water holding capacity, composition of most fatty acids (FA), hypocholesterolemic‐to‐hypercholesterolemic FA ratio, atherogenicity, thrombogenicity, and desirable fatty acids. The use of dietary lauric acid from palm kernel cake is recommended at doses up to 15 g per kg because its presence reduces lipid oxidation and improves color parameters, softness, and linoleic and linolenic FA without affecting the FA composition of sausage from Nellore bull's meat. Practical applications : Sausages are products manufactured from chopped or ground meats packaged into animal casings. This product appeared in Brazil through the adaptation of traditional recipes brought by German and Italian immigrant families to weather conditions and the national palate. However, due to its production characteristics, sausage can become a product with lipid characteristics that are undesirable for human consumption. The inclusion of lauric acid (C12:0) in the animal diet might change the biohydrogenation process in the rumen, improve the quality of the deposited FA and reduce lipid oxidation in sausage manufactured from meat. The FA composition and physicochemical properties of sausage predict its acceptance by the consumer market. An optimal advantage would be achieved if these products can be used as not only preservatives but also functional ingredients with antioxidant properties and products for the treatment of metabolic syndrome and cardiovascular diseases through atherogenic action.     

Analysis of bacterial community during the fermentation of pulque, a traditional Mexican alcoholic beverage, using a polyphasic approach

In this study, the characterization of the bacterial community present during the fermentation of pulque, a traditional Mexican alcoholic beverage from maguey (Agave), was determined for the first time by a polyphasic approach in which both culture and non-culture dependent methods were utilized. The work included the isolation of lactic acid bacteria (LAB), aerobic mesophiles, and 16S rDNA clone libraries from total DNA extracted from the maguey sap (aguamiel) used as substrate, after inoculation with a sample of previously produced pulque and followed by 6-h fermentation. Microbiological diversity results were correlated with fermentation process parameters such as sucrose, glucose, fructose and fermentation product concentrations. In addition, medium rheological behavior analysis and scanning electron microscopy in aguamiel and during pulque fermentation were also performed. Our results showed that both culture and non-culture dependent approaches allowed the detection of several new and previously reported species within the alpha-, gamma-Proteobacteria and Firmicutes. Bacteria diversity in aguamiel was composed by the heterofermentative Leuconostoc citreum, L. mesenteroides, L. kimchi, the gamma-Proteobacteria Erwinia rhapontici, Enterobacter spp. and Acinetobacter radioresistens. Inoculation with previously fermented pulque incorporated to the system microbiota, homofermentative lactobacilli related to Lactobacillus acidophilus, several alpha-Proteobacteria such as Zymomonas mobilis and Acetobacter malorum, other gamma-Proteobacteria and an important amount of yeasts, creating a starting metabolic diversity composed by homofermentative and heterofermentative LAB, acetic and ethanol producing microorganisms. At the end of the fermentation process, the bacterial diversity was mainly composed by the homofermentative Lactobacillus acidophilus, the heterofermentative L. mesenteroides, Lactococcus lactis subsp. lactis and the alpha-Proteobacteria A. malorum. After a 6-h fermentation, 83.27% of total sugars detected after inoculation were consumed (228.4 mM hexose equivalents) and a carbon (C) recovery of 66.18% in fermentation products was estimated. They were produced 284.4 mM C as ethanol, 71.5 mM C as acetic acid and 19 mM C as lactic acid, demonstrating the presence of homo- and heterofermentative, acetic and alcoholic metabolisms in the final product. It was also found, after hydrolysis, that the exopolysaccharide produced during the fermentation was mainly composed by fructose residues, probably inulin or levan.     

Diminution of quinolizidine alkaloids,oligosaccharides and phenolic compounds from two species of Lupinus and soybean seeds by the effect of Rhizopus oligosporus

Lupinus, like Glycine max (soybean), is an ancient leguminous plant. It has been used as a food by people living around the Mediterranean Sea and in the Andean Highlands. This legume contains quinolizidine alkaloids (Qas), oligosaccharides (OGS) and phenolic compounds (PC). The objective of this study was to evaluate the effect of the growth of Rhizopus oligosporus on the levels of Qas, OGS and PC from L. mutabilis, L. campestris and G. max through tempeh elaboration. The results showed that the soaking and cooking processes of legume seeds diminished the Qas content of L. mutabilis and L. campestris by 50%, and after 48 h of fermentation these compounds decreased by more than 90% in total. OGS diminished by more than 90% in the lupin seeds. The PC content of the three seed species subjected to these processes increased their absorbance value, probably due to the enzymatic action of a fungal tannase. These results suggested that the L. mutabilis, L. campestris and G. max fermentation with R. oligosporus is an efficient method for diminishing antinutritional factors and for obtaining a product with optimal nutritional value. Copyright © 2007 Society of Chemical Industry     

The Effect of Food Type (Fish Nuggets or French Fries) on Oil Blend Degradation during Repeated Frying

Abstract: Oil that is reused multiple times for deep frying goes through changes in chemical composition and physical characteristics, affecting the quality of the fried foods. In this study, the effect of the food type (fish nuggets or French fries) on the degradation of an oil blend during the deep‐fat frying of each food at 180°C during 12 days was determined, and the characteristics of the fried products were evaluated. The degradation of oil during repeated use was relatively faster when fish nuggets were fried than when French fries were fried, as higher values of total polar compounds were obtained. Practical Application: The results are useful for producers of French fries and fish nuggets, such as restaurants or fast foods sellers, providing them with practical guidelines within the permitted values established by the regulatory authorities. The studied foods have high economic importance and are different in their composition. Under the studied conditions, the tested oil blend may be used during 4 d (4 h per day) with a daily replenishment, without discarding the oil when frying fish nuggets, and must be discarded after 8 d when French fries are processed. This suggestion allows preparing safe fried foods for consumers.     

Application of Fast Gas Chromatography–Mass Spectrometry in Combination with the QuEChERS Method for the Determination of Pesticide Residues in Fruits and Vegetables

A fast gas chromatography–mass spectrometry method has been developed for multiresidue determination of up to 56 pesticides in fruits and vegetables in a chromatographic run time of <10 min, using a single quadrupole mass spectrometer operating in selected ion monitoring mode. The well-known acetate-buffering version of the QuEChERS method has been used for sample preparation. Programmable temperature vaporizer injection of 3 μL allowed reaching limits of detection between 0.15 and 15 μg/kg for most compounds in the sample matrices tested. The applicability of the method has been evaluated in apple, orange, carrot, and tomato. Recoveries at three fortification levels (0.01, 0.1 and 0.5 mg/kg) ranged from 70 to 120 % for most compounds, with relative standard deviations below 20 % in all cases. The developed method has been applied to fruit and vegetable samples from different Spanish provinces.     

Laser‐induced surface structures on gold‐coated polymers: Influence of morphology on surface‐enhanced Raman scattering enhancement

The fabrication of highly sensitive and reproducible substrates for Surface‐Enhanced Raman Scattering (SERS) remains a challenging scientific and technological issue. In this work, laser‐induced periodic surface structures are generated on poly(trimethylen terephthalate) films upon laser irradiation with the linearly polarized beams of a Nd:YAG laser (4th harmonic, 266 nm), an ArF excimer laser (193 nm), and a Titanium:sapphire laser (795 nm), resulting in periods close to the laser wavelength when irradiating at normal incidence, and larger periods for different angles of incidence. Additional irradiation with a circularly polarized beam at 266 nm produces superficial circular structures. The nanostructured polymers are coated with a nanoparticle assembled gold layer by pulsed laser deposition at 213 nm. The capabilities of these substrates for SERS are evaluated using benzenethiol as a test molecule and different degrees of Raman signal enhancement are observed depending on the nanostructure type. The highest enhancement factor is obtained by for nanostructured substrates with the highest values of period, depth, and roughness. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42770.     

Influence of temperature,calcium and sucrose concentration on viscoelastic properties of Prosopis chilensis seed gum and nopal mucilage dispersions

Viscoelastic properties of two nontraditional hydrocolloid dispersions were evaluated. Prosopis chilensis seed gum was evaluated based on temperature (5–80 °C) and added CaCl₂ (0.07%), whereas nopal mucilage was evaluated based on temperature (5–80 °C) and sucrose concentration (0–20%). Viscoelasticity was tested by the small strain oscillatory shear test; storage modulus (G′), loss modulus (G″) and tan δ were reported. Prosopis chilensis and nopal dispersions behaved as weak gels (G’ > G’’) regardless of experimental condition. Raising temperature from 20 to 80 °C significantly increased G’. The gel structure was strengthened by adding CaCl₂ and G’ increased at 40 °C. The sucrose effect depended on concentration and temperature; at low sucrose concentrations, G’ modulus increased regardless of temperature level, but at high concentrations, it decreased at temperatures >40 °C. In conclusion, nopal and Prosopis chilensis dispersions show weak gel structure regardless of experimental condition. G′ increases as temperature increases, and these dispersions could be suitable for food applications requiring heat tolerance.     

Physicochemical properties of ready‐to‐eat extruded nixtamalized maize‐based snacks enriched with grasshopper

The aim of this research was to prepare an extruded snack based on nixtamalized maize flour (Zea mays L.) (NMF) enriched with grasshopper meal (Sphenarium purpurascens Ch.) (GM) using a single screw extruder with a compression screw ratio of 3:1. A central experimental design comprising three independent variables, namely, extrusion temperature (T = 120–180 °C), feed moisture content (FMC = 18–22 g/100 g) and the grasshopper meal proportion (GMP = 0–40 g/100 g), was used. Increasing T decreased (P < 0.05) the expansion index (EI), bulk density (BD) and hardness (H). Increasing the FMC increased (P < 0.05) the EI. Increasing the GMP decreased (P < 0.05) the EI, H and water absorption index (WAI) and increased (P < 0.05) the BD and total colour difference (ΔE). The treatments that resulted in better general acceptability were those that contained a lower GMP. An extruded snack acceptable to the consumer can be obtained from a blend of NMF and GM, and up to 8.11 g/100 g of GM can be incorporated without affecting the physicochemical properties and acceptance of the snack.     

Latent communities of digital publications: The role of editors,followers, and advertisers

This research explores how digital publications may be turned into something more than just a meeting point for people who are seeking information and may become a latent community. The paper proposes that the network of editors, followers, and advertisers of digital publications determine the user sense of community towards the publication. While the pattern of connections among editors and followers reinforces the sense of community, advertisers act as intruders who weaken the feasibility of building a community. Data were collected from followers of digital publications. The dynamics of the sense of community is described as a process in which informational value and identification are essential to nurturing readers’ soft or hard commitment. Findings indicate that the strong ties between editors and followers as well as the diversity positively impacts on informational value and identification, whereas advertising intrusiveness diminishes the informational value.