Electrochemical curing of epoxy resins

An electrochemical method has been developed for bonding electrically-conductive adherends. The procedure is based on the electrochemical generation of a curing agent from an otherwise chemically-unreactive precursor mixed with an epoxy resin sandwiched between the bonding members. The one-part epoxy resin is storage stable and cured rapidly on passage of current.     

Rapid calculation for convective heat transfer in laminar boundary layer by Gaussian quadratures

Summary The integral of the form , which arises in the convective heat transfer with constant wall temperature, is integrated by using Gauss-Laguerre and Gauss-Legendre Quadrature formulae. It is shown that the Nusselt number can be expressed explicitly in terms of the Prandtl number and the method proposed in this paper is valid for wide range of Prandtl numbers. Examples are given for the cases of flow over a semi-infinite plate and two-dimensional and axisymmetrical stagnations. The results are compared with the exact solutions for Prandtl numbers ranging from 0.006 to 100 (flat plate) and 0.01 to 50 (two-dimensional and axisymmetrical stagnation flows).     

Bias voltage dependence properties of cadmium oxide films deposited by d.c. reactive magnetron sputtering

Cadmium oxide films were grown on glass substrates using d.c. reactive magnetron sputtering technique by sputtering from a metallic cadmium target in an oxygen partial pressure of 1×10^–3 mbar under various substrate bias voltages. The substrate bias voltage significantly influences the crystallographic structure of the deposited films. The influence of substrate bias voltage on the electrical and optical properties of the films was systematically studied. The films formed at a substrate temperature of 473 K and bias voltage of –80 V showed an electrical resistivity of 1×10^–3 cm, optical transmittance of 86%, optical band gap of 2.47 eV and a figure of merit of 7×10^{–3 –1}.     

Performance of piezoelectric fiber-reinforced composites for active structural-acoustic control of laminated composite plates

This paper deals with the active structural acoustic control of thin laminated composite plates using piezoelectric fiber-reinforced composite (PFRC) material for the constraining layer of active constrained layer damping (ACLD) treatment. A finite element model is developed for the laminated composite plates integrated with the patches of ACLD treatment to describe the coupled structural-acoustic behavior of the plates enclosing an acoustic cavity. The performance of the PFRC layers of the patches has been investigated for active control of sound radiated from thin symmetric and antisymmetric cross-ply and antisymmetric angle-ply laminated composite plates into the acoustic cavity. The significant effect of variation of piezoelectric fiber orientation in the PFRC layer on controlling the structure-borne sound radiated from thin laminated plates has been investigated to determine the fiber angle in the PFRC layer for which the structural-acoustic control authority of the patches becomes maximum.     

Microfluorometric detection of catecholamines with multiphoton-excited fluorescence

We demonstrate sensitive spatially resolved detection of physiological chromophores that emit in the ultraviolet (<330 nm). An atypical laser source (a visible wavelength femtosecond optical parametric oscillator), and an unconventional collection geometry (a lensless detector that detects the forward-emitted fluorescence) enable this detection. We report the excitation spectra of the catecholamines dopamine and norepinephrine, together with near-UV emitters serotonin and tryptophan, in the range of 550-595 nm. We estimate the molecular two-photon action cross section of dopamine, norepinephrine, and serotonin to be 1.2 mGM (1 GM, or Goppert Mayor, is equal to 10(-58) m4 s(-1) photon(-1)), 2 mGM, and 43 mGM, respectively, at 560 nm. The sensitivity achieved by this method holds promise for the microscopic imaging of vesicular catecholamines in live cells.     

Mechanism of in situ formation of AlN in Al melt using nitrogen gas

In situ processing of AlN particle reinforced aluminum composites was investigated using a gas bubbling method with nitrogen gas as the gaseous precursor and pure aluminum as the starting matrix in the temperature range of 1173–1573 K. The products were characterized using XRD, SEM, and EDS techniques. Experimental results showed that it is feasible to synthesize AlN particle reinforced Al composites in situ using purified nitrogen gas. Significant AlN was synthesized by bubbling deoxidized N₂ through Al melt. The AlN particles synthesized in situ were small in size (<10 m) and were enriched in the top part of the product formed in the crucible. Directly bubbling commercial purity nitrogen gas did not lead to formation of significant AlN due to the deleterious effect of the trace oxygen impurities in the bubbling gas. The deleterious effect of trace oxygen impurities on the mechanism of formation of AlN in the Al-N system was critically analyzed from both thermodynamic and kinetic points of view. Chemisorption of O₂ molecules at the gas bubble-Al melt interface is more favorable and much faster than that of N₂, thereby inhibiting chemisorption of N₂ molecules. Significant AlN can be formed only at the content of oxygen below a critical value in the N₂ bubbling gas.     

Legume-based fermented foods: their preparation and nutritional quality

Legume-based fermented foods are very popular in the Southeast Asia, the Near East, and parts of Africa. They form an appreciable part of daily diet of people as a main source of protein, calories, and certain vitamins. Preparation of legume-based fermented foods has remained to some extent an art, and their nutritional quality has been of interest to both professionals and layman. The fermentation process helps not only in improving the organoleptic quality of legumes but also enhances nutritional quality. This review examines the production of various legume-based fermented foods and critically assesses their nutritional quality.     

An asymptotic theory for vibrations of inhomogeneous/laminated piezoelectric plates

An asymptotic theory for the vibration analysis of inhomogeneous monoclinic piezoelectric plates is developed by using small parameter expansion. The theory includes the important special case of a laminated plate in which each layer is homogeneous and orthotropic, but distinct from the other layers by having a different material or a different orientation. A hierarchy of two-dimensional equations of the same homogeneous operator for each order is reduced from the three-dimensional framework of linear piezoelectricity. The elasticity version of the leading-order equation is the same as that of the classical Kirchhoff inhomogeneous plate theory and, therefore, is easily solvable. By contrast, it is not straightforward to find solutions of the higher-order equations. The solvability condition is thus established for this purpose, by which higher-order frequency parameters are derived. The present theoretical formulation is examined by comparing the present asymptotic results with an exact three-dimensional solution for a piezoelectric bimorph strip, and excellent agreement is reached. Some new results are presented.     

Assessment of electrokinetic removal of heavy metals from soils by sequential extraction analysis

Electrokinetic remediation of metal-contaminated soils is strongly affected by soil-type and chemical species of contaminants. This paper investigates the speciation and extent of migration of heavy metals in soils during electrokinetic remediation. Laboratory electrokinetic experiments were conducted using two diverse soils, kaolin and glacial till, contaminated with chromium as either Cr(III) or Cr(VI). Initial total chromium concentrations were maintained at 1000mg/kg. In addition, Ni(II) and Cd(II) were used in concentrations of 500 and 250mg/kg, respectively. The contaminated soils were subjected to a voltage gradient of 1 VDC/cm for over 200h. The extent of migration of contaminants after the electric potential application was determined. Sequential extractions were performed on the contaminated soils before and after electrokinetic treatment to provide an understanding of the distribution of the contaminants in the soils. The initial speciation of contaminants was found to depend on the soil composition as well as the type and amounts of different contaminants present. When the initial form of chromium was Cr(III), exchangeable and soluble fractions of Cr, Ni, and Cd ranged from 10 to 65% in kaolin; however, these fractions ranged from 0 to 4% in glacial till. When the initial form of chromium was Cr(VI), the exchangeable and soluble fractions of Cr, Ni and Cd ranged from 66 to 80% in kaolin. In glacial till, however, the exchangeable and soluble fraction for Cr was 38% and Ni and Cd fractions were 2 and 10%, respectively. The remainder of the contaminants existed as the complex and precipitate fractions. During electrokinetic remediation, Cr(VI) migrated towards the anode, whereas Cr(III), Ni(II) and Cd(II) migrated towards the cathode. The speciation of contaminants after electrokinetic treatment showed that significant change in exchangeable and soluble fractions occurred. In kaolin, exchangeable and soluble Cr(III), Ni(II), and Cd(II) decreased near the anode and increased near the cathode, whereas exchangeable and soluble Cr(VI) decreased near the cathode and increased near the anode. In glacial till, exchangeable and soluble Cr(III), Ni(II), and Cd(II) were low even before electrokinetic treatment and no significant changes were observed after the electrokinetic treatment. However, significant exchangeable and soluble Cr(VI) that was present in glacial till prior to electrokinetic treatment decreased to non-detectable levels near the cathode and increased significantly near the anode. In both kaolin and glacial till, low migration rates occurred as a result of contaminants existing as immobile complexes and precipitates. The overall contaminant removal efficiency was very low (less than 20%) in all tests.