2-D symmetry: theory and filter design applications

In this comprehensive review article, we present the theory of symmetry in two-dimensional (2-D) filter functions and in 2-D Fourier transforms. It is shown that when a filter frequency response possesses symmetry, the realization problem becomes relatively simple. Further, when the frequency response has no symmetry, there is a technique to decompose that frequency response into components each of which has the desired symmetry. This again reduces the complexity of two-dimensional filter design. A number of filter design examples are illustrated.     

Prolonged tamoxifen exposure selects a breast cancer cell clone that is stable in vitro and in vivo

The effects of long-term tamoxifen exposure on cell growth and cell cycle kinetics were compared between oestrogen receptor (ER)-positive (MCF-7) and ER-negative (MDA-MB-231) cell lines. In the MCF-7 cell line, prolonged tamoxifen exposure (0.5 mumol/l for > 100 days) blocked cells in G0-G1 of the cell cycle, and slowed the doubling time of cells from 30 to 59 h. These effects corresponded to an increase in the cellular accumulation of tamoxifen over time [mean area under concentration curve (AUC) = 77.92 mumoles/10(6)/cells/day]. In contrast, in the MDA-MB-231 cell line, long-term tamoxifen exposure had no obvious effect on the doubling time, and reduced cellular tamoxifen accumulation (mean AUC = 50.50 mumoles/10(6)/cells/day) compared to the MCF-7 cells. Flow cytometric analysis of MDA-MB-231 cells demonstrated that a new tetraploid clone emerged following 56 days of tamoxifen exposure. Inoculation of the MDA-MB-231 tetraploid clone and MDA-MB-231 wildtype cells into the opposite flanks of athymic nude mice resulted in the rapid growth of tetraploid tumours. The tetraploid tumours maintained their ploidy following tamoxifen treatment for nine consecutive serial transplantations. Histological examination of the fifth transplant generation xenografts revealed that the tetraploid tumour had a 25-30 times greater mass, area of haemorrhage and necrosis, a slightly higher mitotic index and was more anaplastic than the control neoplasm. The control wildtype MDA-MB-231 tumours maintained a stable ploidy following tamoxifen treatment until the eighth and ninth transplantation, when a tetraploid population appeared, suggesting that tamoxifen treatment may select for this clone in vivo. These studies suggest that prolonged tamoxifen exposure may select for new, stable, fast growing cell clones in vitro as well as in vivo.     

Antibody against synthetic rat PTH peptide (1-34) blocks PTH-mediated cAMP formation and phosphate transport in opossum kidney cells

The expression of the NMDA subtype of glutamate receptors was investigated by Western blot analysis and RT-PCR in cultured chick Bergmann and Müller glial cells. Using subunit-specific antibodies directed to the carboxy terminus of the rat NMDAR2A/B we detected the expression of the NMDAR2 subunit in both kinds of culture. The functional subunit of the NMDA receptor, NMDAR1, was detected by means of RT-PCR. These results, together with our previous functional characterization of NMDA receptors in radial glia, provide conclusive evidence for the expression of functional NMDA receptor/channels in Bergmann and Muller glia cells. Our findings strengthen the notion of a modulatory role of glial cells in synaptic transmission.     

Advances in the stabilization of flexible PVC by using a liquid calcium‐zinc technology

The global market for liquid mixed‐metal stabilizers is migrating toward heavy‐metal‐free products, Historically, these systems have not been performance and cost competitive. High efficiency calcium‐zinc stabilizers have the potential to replace heavy‐metal‐based products. The intrinsic value of non‐phenolic lubricating calcium intermediates and calcium‐zinc stabilizers is discussed.     

Interface stability during displacement reactions between Cu<Subscript>2</Subscript>O and Co<Subscript>1−<Emphasis Type="Italic">X</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">X</Emphasis></Subscript> alloys at 1223 K

The stability of the reactive interface during the solid-state displacement reaction, Cu₂O+Co_1−X Fe _X =2Cu+(Co_1−X Fe _X )O, is studied as a function of Co-Fe alloy composition at 1223 K. For X≤0.03, the reaction zone has a layered structure, and the cation diffusion in (Co, Fe)O is the rate-limiting step. The interface is unstable in the early stages of the reaction; the instability decreases with time as the oxide thickness increases, and the interface becomes planar at long times. The time required for the attainment of interface planarity increases with the value of X. The reaction kinetics are consistent with the available cation-diffusion data in (Co, Fe)O. For X≥0.045, the product zone is a composite of Cu+(Co, Fe)O, and the rate is limited by the oxygen transport in copper. The transition to interface instability occurs when the oxide can support a cation flux that exceeds the maximum possible oxygen flux in copper. During the reaction, composition gradients develop in (Co, Fe)O because of higher diffusion rates for iron than for cobalt.     

Study of dielectric properties of RbNO3 single crystals

Dielectric properties, dielectric constant (k), dielectric loss (tan δ) and a.c. conductivity (σ) in the solution-grown single crystals of RbNO₃ are presented from room temperature to about 200°C covering the frequency range 10² to 10⁵ Hz. A broad peak observed in tan δ-frequency data between 10³ and 10⁵Hz is thought to be due to impurity-vacancy dipoles. The sudden rise of three parameters near 160°C is attributed to the known phase transition from trigonal to CsCl structure.     

A review on the synthesis of in situ aluminum based composites by thermal,mechanical and mechanical–thermal activation of chemical reactions

The aim of the present paper is to review the recent progress in the synthesis of in situ particle reinforced aluminum composites using thermal, mechanical and combined mechanical-thermal activation of aluminothermic reduction reactions. The combination of combustion synthesis (CS) and mechanosynthesis (MS) is the most recent development in the processing of advanced materials like micro and nano aluminum based composites. The combined mechanical thermal synthesis (MTS) has widened the possibilities for both CS and MS. MTS holds great potential for commercial viability and offers exciting processing route for the synthesis of advanced materials. Enhanced reaction kinetics and extended concentration limits in MTS are demonstrated by illustrating the synthesis of aluminum based nanocomposite involving Al–CeO₂.     

A comparative study of the gas sensing behavior of nanostructured nickel ferrite synthesized by hydrothermal and reverse micelle techniques

A comparative study of gas sensing behavior of nanocrystalline nickel ferrite synthesized by micro-emulsion and hydrothermal method to liquefied petroleum gas (LPG) is presented. Nanocrystalline nickel ferrite synthesized by hydrothermal method indicated higher electrical conductivity and gas sensitivity at low operating temperature compared to nanocrystalline nickel ferrite synthesized by reverse micelle technique. This difference in the gas sensing behavior can be attributed to the presence of more oxygen vacancies (i.e. non-stoichiometry) in the hydrothermally synthesized nickel ferrite. Incorporation of palladium had a catalytic effect and the operating temperature was significantly reduced in both the samples. The higher operating temperature of the reverse micelle nickel ferrite material makes the sensor response speed faster (∼10 s) compared to the hydrothermally synthesized material (∼1 min).